users

users@lists.genode.org

2285 discussions

Genode with Trustzone
by Vasan VS 25 May '22

25 May '22

Hi Genodians, I was extremely thrilled to read through the extensive documentation on how Genode has been experimented with Trustzone of ARM available at: https://genode.org/documentation/articles/trustzone I am very interested to know if the same has been experimented on the latest ARM cores/SoCs that are there in the market currently and any feedback on that. Regards Vasan

2 1

Network Mounts On Sculpt
by John J. Karcher 24 May '22

24 May '22

Hello Everyone, After just reading articles and tinkering on the surface for all these years, it is a satisfying feeling to finally dig deeper into setting up a daily driver system. And some of the packages I see in the depots (e.g., Thunderbird) indicate that the transition to native Genode (as opposed to Linux VMs) may be quicker than I expected! One thing I do need to resolve is mounting network shares in Genode. The VFS is obviously designed for things just like this, but I'm having trouble finding detailed info on this topic. Could someone point me in the right direction for how to set this up? I am currently using NFS, but I will gladly switch to SSHFS or anything else that works. Thanks! -- John J. Karcher devuser(a)alternateapproach.com

2 1

Launchers 101
by John J. Karcher 19 May '22

19 May '22

Hello, Is there an introductory article about creating launchers in Sculpt, preferably from the config for a running component? I thought I saw something like that, but I can't seem to find it. Thanks! -- John J. Karcher devuser(a)alternateapproach.com

5 8

Announcement: Sculpt OS 22.04 released
by Christian Helmuth 18 May '22

18 May '22

Hello everyone, today we released version 22.04 of the Sculpt operating system, which as always incorporates all improvements in Genode of the past months. https://genode.org/news/sculpt-os-release-22.04 The most prominent changes are: - Completely new drivers for Intel wireless, Intel graphics and USB2/3 host controllers - Service-level sandboxing - Hardware-accelerated graphics for guest operating systems in VirtualBox It goes without saying that the new release is accompanied with an updated manual: https://genode.org/documentation/articles/sculpt-22-04 https://genode.org/documentation/sculpt-22-04.pdf A ready-to-use disk image is provided at the Sculpt download page: https://genode.org/download/sculpt Happy Sculpting Christian -- Christian Helmuth Genode Labs https://www.genode-labs.com/ · https://genode.org/ https://twitter.com/GenodeLabs · https://genodians.org/ Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

2 1

error in building boot image Sculpt OS
by vasvi sharma 16 May '22

16 May '22

Good Afternoon I am new to Sculpt OS and I was working on building genode from source code and then later on building boot image (sculpt OS). I faced an issue while working on the boot image when I run the following line : make -C build/x86_64 run/sculpt KERNEL=nova BOARD=pc Error presented with and without debug in the image shown below (image 1 and 2) . I also noticed the error changed if I revert the changes I made in build.conf for building genode from source code (image 3) asboth the process required modifying the same file. This was the official document like via which I tried to build boot image : https://genode.org/documentation/articles/sculpt-22-04#Building_the_boot_im… How should I resolve this issue ? Thanks Vasvi

3 5

VirtualBox Questions
by John J. Karcher 15 May '22

15 May '22

Hello Everyone, Moving my main VistualBox VM to Sculpt has been mostly successful (and very encouraging), but I have two main problems that are keeping me from switching to it as the daily driver. Hopefully these are easy questions... 1. How do you specify the window size of the VM? 2. I need to use "Bridged Networking" for access to certain things on my LAN, but it looks like the VM is using NAT. I have tried poking around in the vbox6 file, but I don't know if there is more to it than that. Any help would be appreciated! Thanks! -- John J. Karcher devuser(a)alternateapproach.com

1 0

restarting child components with resource saturation
by Duss Pirmin 12 May '22

12 May '22

Hello Genodians We have a somewhat complex scenario consisting of a hand full of components and (sub-)inits. The outermost deploy-config starts, besides others, the following components: - vfs - report_rom and other helper components - init (drivers runtime) - init (management runtime) - init (dynamic runtime, ram/cap saturation) The runtimes are configured via a deploy-config. Most components and runtimes depend on the file system provided by vfs. When restarting vfs by incrementing the version attribute, some components that depend on vfs don't get any resources any more after being restarted. In the state reports of init I see that the RAM quota for some subsystems decreases after the restart of vfs. For some it increases for a short time but goes back down again. For most, including dynamic runtime, it stays constant for the whole time. I wasn't able to create a simpler example that shows the same error. Does anybody have an idea in which direction I could investigate? Best regards, Pirmin

2 3

One Small Step For Genode...
by John J. Karcher 12 May '22

12 May '22

... one giant leap for a Genode enthusiast! ( OK, I exaggerated - it's not really a step for Genode at all, but it is a huge leap for me! ;^) ) After being extremely short of time for about a year, I finally used the 22.04 release to take my first steps toward using Genode as my daily driver OS, mainly by using VirtualBox 6 to run my existing VMs under Sculpt. I still have some problems to work out before I can make the official transition, and I will probably have a fair number of "new user" questions here soon, but I am highly impressed with the state of the system. In the beginning, I will probably continue to do most tasks within the Linux VMs, but I am really looking forward to gradually shifting applications to running directly on Genode as they (or native alternatives) become available. If any daily users have tips to share, I'll certainly be listening! (If I come up with anything helpful, I will try to write it up for Genodians also.) One thing I am very curious about is the state of the various packages in the depots - some of those look very intriguing! The bottom line: Thanks to the Genode devs and community members for making this possible! Happy Sculpting! John J. Karcher devuser(a)alternateapproach.com

2 2

x86 Sculpt Experience
by Sagar Acharya 06 May '22

06 May '22

I tried 22-04 img on Intel i5. Considering the problems I've faced with Qubes, etc. in past, for such a 1st img , please accept my standing ovation and claps for the whole team. GUI loading and stability was awesome. 10/10 for 1st image. I have some feedback. 1. Mouse using my trackpad was very difficult to manage, it wasn't stable. 2. There's no shutdown button, poweroff button and no instructions in documentation on how to do so. I had to use hardware based shutdown which definitely harms my hardware. I wasn't able to use ramfs depot to download genodelabs tools. I'd try it after a shutdown button is introduced as hardware shutdown messes my hardware. Thanking you Sagar Acharya

2 1

Unable to run prepare_port for "libc" target
by Timo Nicolai 29 Apr '22

29 Apr '22

Hello, I'm trying to run Genode for the first time and I've noticed that the prepare_port script seems to fail for the "libc" target on the current master branch. I'm getting: libc extract src.txz (libc) xz: (stdin): File format not recognized tar: Child returned status 1 tar: Error is not recoverable: exiting now Hard to see what the actual issue here is, I have xz version 5.2.5 installed if that helps. Best regards, Timo Nicolai

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users