So I should try picocom on both sides?

By the way, I'm not using USB for the connection, and both sides will let me access ttyS0. On Nov 12, 2014 1:42 AM, "Christian Helmuth" < christian.helmuth@...1...> wrote:

Hello Ben,

On Wed, Nov 12, 2014 at 01:59:25AM +0000, Nobody III wrote:

It's not working. Do you have any suggestions? Is there something else I need to do?

I'd suggest you run Linux on both computers and try out if the serial connection is working using the commands Christian Prochaska recommended. In case you're using USB-to-serial, please make sure you connect the serial connector to the COM port of the destined test machine. Also you should make sure that the BIOS settings of the test machine activate the UART/COM.

Greets -- Christian Helmuth Genode Labs

http://www.genode-labs.com/ · http://genode.org/ https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/

Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.cl... _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main