Hi,
I have built uImage using Genode OS Framework for IMX6 Sabre SDBoard. I am getting error as cannot get kernel image.
My built uImage is 7858662 Bytes = 7.5 MB
I used following commands to flash u-boot and uImage respectively (It is a 16GB microsdcard)
$sudo dd if=u-Boot-mx6q-sabresd-no-padding.bin of=/dev/sdc bs=512 seek=2 conv=fsync $sudo dd if=uImage of=/dev/* bs=512 seek=2048 conv=fsync
When I inserted the SDCard to the board and tried to boot, it is giving the following error:
## Booting kernel from Legacy Image at 10800000 ...
Image Name:
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 7858662 Bytes = 7.5 MB
Load Address: 10001000
Entry Point: 10001000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
So, I thought of of changing please try Load Address: 10800000 as per this post.
https://community.freescale.com/message/510211#510211
How can I change the Load address. Please suggest.
Hello Bharath,
we have used the SD card which is formated in FAT format and we used the following command to boot uImage on the SABRE Lite Board. you can use any other format also and change the following command respectively.
1) Copy the uImage in SD card. 2) Command used on uboot u-boot> mmc dev 1 u-boot> fatload mmc 1:1 0x10800000 uImage u-boot> bootm 0x10800000
First command on u-boot is used to select SD card, second command is used to load uImage on particular address located in RAM and finally third command is used for boot from a particular location.
you can change this load address to any other address.
Regards, Chirag
On Wed, Apr 29, 2015 at 3:40 PM, bharath <bharathkr.bojja@...9...> wrote:
Hi,
I have built uImage using Genode OS Framework for IMX6 Sabre SDBoard. I am getting error as cannot get kernel image.
My built uImage is 7858662 Bytes = 7.5 MB
I used following commands to flash u-boot and uImage respectively (It is a 16GB microsdcard)
$sudo dd if=u-Boot-mx6q-sabresd-no-padding.bin of=/dev/sdc bs=512 seek=2 conv=fsync $sudo dd if=uImage of=/dev/* bs=512 seek=2048 conv=fsync
When I inserted the SDCard to the board and tried to boot, it is giving the following error:
## Booting kernel from Legacy Image at 10800000 ...
Image Name:
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 7858662 Bytes = 7.5 MB
Load Address: 10001000
Entry Point: 10001000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
So, I thought of of changing please try Load Address: 10800000 as per this post.
https://community.freescale.com/message/510211#510211
How can I change the Load address. Please suggest.
One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
-
bharath -
chirag garg