Hello Bharath,

we have used the SD card which is formated in FAT format and we used the following command to boot uImage on the SABRE Lite Board. you can use any other format also and change the following command respectively.

1)  Copy the uImage in SD card.
2)  Command used on uboot
      u-boot> mmc dev 1
      u-boot> fatload mmc 1:1 0x10800000 uImage
      u-boot> bootm 0x10800000

First command on u-boot is used to select SD card, second command is used to load uImage on particular address located in RAM and finally third command is used for boot from a particular location.

you can change this load address to any other address.

Regards,
Chirag

On Wed, Apr 29, 2015 at 3:40 PM, bharath <bharathkr.bojja@...9...> wrote:
Hi,

I have built uImage using Genode OS Framework for IMX6 Sabre SDBoard. I am
getting error as cannot get kernel image.

My built uImage is 7858662 Bytes =  7.5 MB

I used following commands to flash u-boot and uImage respectively (It is a
16GB microsdcard)

$sudo dd if=u-Boot-mx6q-sabresd-no-padding.bin of=/dev/sdc bs=512 seek=2
conv=fsync
$sudo dd if=uImage of=/dev/* bs=512 seek=2048 conv=fsync

When I inserted the SDCard to the board and tried to boot, it is giving the
following error:

## Booting kernel from Legacy Image at 10800000 ...

   Image Name:

   Image Type:   ARM Linux Kernel Image (gzip compressed)

   Data Size:    7858662 Bytes =  7.5 MB

   Load Address: 10001000

   Entry Point:  10001000

   Verifying Checksum ... Bad Data CRC

ERROR: can't get kernel image!

So, I thought of of changing please try Load Address: 10800000 as per this
post.

https://community.freescale.com/message/510211#510211

How can I change the Load address. Please suggest.


------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main