users

users@lists.genode.org

1 participants
2310 discussions

Re: First system image of Sculpt OS for the PinePhone
by Pirmin Duss 13 Mar '23

13 Mar '23

Hello Genodians My first tests of Sculpt OS on the PinePhone. The startup time of the Operating system really impresses me. Not to wait for the phone for a minute or so after powering on is super cool. The GUI is really functional and lets me change settings really quick. It may not be as pretty as the one in slowly booting operating systems, but navigating around is much more logical IMHO. Unfortunately I wasn't able to do any calls. When I turned the power on for the Modem, some steps were counted up (four if I remember correctly), but after that a Message (unknown pin starte) was printed. for some time (maybe 15 Seconds). After that the dial-pad was displayed. After entering a number and pressing "Initiate Call" the status "Dialing xxx xxx xx xx [cancel]" was displayed, but nothing happened. I was able to cancel the call, but I wasn't able to torn off the modem again. I was able to download the morph browser preset, but did not do further testing yet. One thing I noticed, when lowering the brightness to the lowest setting, the screen seems to turn completely off. I was still able to set the brightness back to a level where the screen is visible. So this is only a minor issue. Am I right to assume, that keeping the settings persistent over reboots isn't yet implemented? As I prefer longevity above performance for my phone, I did set "economic" and a relatively low display brightness, but after each reboot they are back to the defaults. I did set the first partition of mmcblk0 to default after expanding it. This worked as flawless as on the PC platform. Regards, Pirmin

2 2

rockchip git updated
by Michael Grunditz 11 Mar '23

11 Mar '23

Hi I just updated my rockchip repo to match Genode current. https://github.com/mickenx/genode-rockchip Cheers, Michael

1 0

Unable to connect to network in QEMU.
by Devashish Dewangan cs21m017 11 Mar '23

11 Mar '23

Dear Genodians, I am unable to connect to network while running the sculpt 22.10 x86 image provided by genode in QEMU. But I am able to connect to the network while using the sculpt.ova in virtual box. How can I connect to network while using sculpt in QEMU?

2 6

Enumerating partitions, then "Error: Aborting: no partition table found."
by dogma＠disroot.org 10 Mar '23

10 Mar '23

Since Sculpt OS 22.10 wouldn't boot for me, I'm using images that Alex kindly made for me in the course of troubleshooting that. In the log, this calls itself "Genode 23.02-24-g23bbbcd8ac <local changes>". Anyway, the hard drive. It's an actual, old-fashioned hard drive, and I've accumulated 21 partitions on it. The log goes like [core] [init -> drivers -> dynamic -> ahci_drv] version: major=0x1 minor=0x300 [core] [init -> drivers -> dynamic -> ahci_drv] command slots: 32 [core] [init -> drivers -> dynamic -> ahci_drv] native command queuing: yes [core] [init -> drivers -> dynamic -> ahci_drv] 64-bit support: yes [core] [init -> drivers -> dynamic -> ahci_drv] number of ports: 6 [core] [init -> drivers -> dynamic -> ahci_drv] #0: ATA [core] [init -> drivers -> dynamic -> ahci_drv] #4: off (unknown device signature) [core] [init -> drivers -> dynamic -> ahci_drv] #5: off (unknown device signature) [core] [init -> runtime] child "ahci-0.part_block" [core] [init -> runtime] RAM quota: 7944K [core] [init -> runtime] cap quota: 66 [core] [init -> runtime] ELF binary: part_block [core] [init -> runtime] priority: 2 [core] [init -> runtime] provides service Block [core] [init -> runtime -> ahci-0.part_block] Partition 1: LBA 40 (119537688 blocks) type: [...] Then, immediately after it's listed them all, giving values that look correct... [core] [init -> runtime -> ahci-0.part_block] Error: Aborting: no partition table found. [core] [init -> runtime -> ahci-0.part_block] Error: Uncaught exception of type 'Block::Main::No_partition_table' [core] [init -> runtime -> ahci-0.part_block] Warning: abort called - thread: ep [core] [init -> log] Error: corrupted string [core] [init -> leitzentrale -> manager] Error: ahci-0.part_block got stuck And so Sculpt OS doesn't show the partitions.

2 3

base-hw running on a Cortex A7 processor?
by Robert Stewart 09 Mar '23

09 Mar '23

I'm about to start to bring up a base-hw implementation on an Arm Cortex A-7 quad core Allwinner H3 board. Has this already been done by anyone? The A7 is "similar" to the A9 with the addition of LPAE. As opposed to the A9, it has GIC v2 and an SCU with an L2 Cache tightly coupled to it, mean that you can turn on or off the cache and that's all the control you have. It looks like the Cortex A15 implementation already in base-hw would be a good model to follow to get the A7 running. Bob Stewart Get Outlook for Android<https://aka.ms/AAb9ysg>

3 4

rump files missing fatal error on virt qemu riscv
by Pranab Kumar Rout cs21m045 07 Mar '23

07 Mar '23

Hi all, While building the sculpt for virt_qemu_riscv, I got the following fatal error. checking library dependencies... Library-description file rump.mk is missing Library ldso_so_support COMPILE so_support.o MERGE ldso_so_support.lib.a Library ld CONVERT ld.symbols.s ASSEMBLE ld.symbols.o MERGE ld.abi.so Library base MERGE base.lib.a Library block_session MERGE block_session.lib.a Library config MERGE config.lib.a Library file_system MERGE file_system.lib.a Library file_system_session MERGE file_system_session.lib.a Library os MERGE os.lib.a Library rump_tools MERGE rump_tools.lib.a Library rump_fs COMPILE autoconf.o In file included from /genode/depot/genodelabs/src/rump/2022-11-28/src/lib/dde_rump/src/sys/rump/librump/rumpdev/autoconf.c:28: genode/depot/genodelabs/src/rump/2022-11-28/src/lib/dde_rump/src/sys/sys/cdefs.h:58:10: fatal error: machine/cdefs.h: No such file or directory 58 | #include <machine/cdefs.h> | ^~~~~~~~~~~~~~~~~ compilation terminated. make[7]: *** [/genode/repos/base/mk/generic.mk:58: autoconf.o] Error 1 make[6]: *** [var/libdeps:187: rump_fs.lib] Error 2 make[5]: *** [Makefile:336: gen_deps_and_build_targets] Error 2 make[4]: *** [genode/tool/depot/mk/build_bin_archive:208: /genode/depot/genodelabs/bin/riscv/rump/2022-11-28.build/bin] Error 1 make[3]: *** [/genode/depot/var/build.mk:264: genodelabs/bin/riscv/rump/2022-11-28] Error 2 make[2]: *** [/genode/tool/depot/build:136: execute_generated_build_mk_file] Error 2 make[1]: *** [/genode/tool/depot/create:59: build] Error 2 make[1]: Leaving directory '/genode/build/riscv' It seems some ports are not prepared for riscv. Kindly suggest what files/directories are to be added and which files require changes. Thanks and regards, Pranab

2 4

Sculpt 22.10 not working on Thinkpad X201
by dogma＠disroot.org 06 Mar '23

06 Mar '23

Image dd'ed to a flash drive, and I checked that vt-d, vt-x, and NX were as they should be. GRUB shows the splash image briefly, the screen goes blank black, something in the computer makes a moderately high-pitched sound for five seconds or so, and nothing more happens.

2 8

Re: users Digest, Vol 59, Issue 6
by YamiNI ReddY 06 Mar '23

06 Mar '23

Thanks for your suggestion. While running the simple run/java demo i got the following error suggesting that socket plugin is not found during init and some more warnings. i have used kernel=hw and BOARD=virt_qemu_arm_v7a Kindly give some advice on how to proceed further. Best, YAMINI. kernel initialized ROM modules: ROM: [40116000,40124703) Genode - Genode News.htm ROM: [403ce000,41e86000) classes.tar ROM: [403cd000,403cd74a) config ROM: [43274000,43275000) core_log ROM: [42003000,42005800) hello.tar ROM: [41fa0000,41fdc570) init ROM: [4027e000,402804c0) java ROM: [40125000,4013cd44) java.lib.so ROM: [41f0d000,41f14978) jimage.lib.so ROM: [40142000,40150728) jli.lib.so ROM: [40108000,40115728) jnet.lib.so ROM: [42048000,42df47a0) jvm.lib.so ROM: [42041000,42047588) jzip.lib.so ROM: [41f15000,41f9f9d0) ld.lib.so ROM: [40281000,403a92f4) libc.lib.so ROM: [4201d000,42040f90) libm.lib.so ROM: [4013d000,401414d0) management.lib.so ROM: [41f01000,41f0c648) nio.lib.so ROM: [43272000,43273000) platform_info ROM: [42006000,42008800) servlet.tar ROM: [40151000,4027db38) stdcxx.lib.so ROM: [41ff7000,4200241c) timer ROM: [41fdd000,41ff6c1c) tzdb.dat ROM: [41e86000,41e91ca4) verify.lib.so ROM: [403aa000,403cc690) vfs ROM: [41e92000,41f00970) vfs.lib.so ROM: [42009000,4201c66c) zlib.lib.so Genode 22.08 1997 MiB RAM and 64535 caps assigned to init [init -> java] Warning: setrlimit: setrlimit not implemented [init -> java] Warning: sysconf(71) not implemented [init -> java] Error: no plugin found for socket() [init -> java] Error: no plugin found for socket() [init -> java] Warning: sysconf(56) not implemented [init -> java] patch_verified_entry:304 called dest 2000a7d0 verf 20152d80 [init -> java] patch_verified_entry:304 called dest 2000a7d0 verf 20145210 [init -> java] Hello, Genode! [init -> java] [init -> java] Individual compiler times (for compiled methods only) [init -> java] ------------------------------------------------ [init -> java] [init -> java] C1 {speed: 10180 bytes/s; standard: 1.261 s, 12835 bytes, 96 methods; osr: 0.000 s, 0 bytes, 0 methods; nmethods_size: 89948 bytes; nmethods_code_size: 45600 bytes} [init -> java] C1 Compile Time: 1.241 s [init -> java] Setup time: 0.008 s [init -> java] Build HIR: 0.577 s [init -> java] Parse: 0.447 s [init -> java] Optimize blocks: 0.018 s [init -> java] GVN: 0.031 s [init -> java] Null checks elim: 0.018 s [init -> java] Range checks elim: 0.022 s [init -> java] Other: 0.041 s [init -> java] Emit LIR: 0.376 s [init -> java] LIR Gen: 0.135 s [init -> java] Linear Scan: 0.226 s [init -> java] Other: 0.015 s [init -> java] Code Emission: 0.129 s [init -> java] Code Installation: 0.135 s [init -> java] Other: 0.016 s [init -> java] JVMCI code install time: 0.000 s [init -> java] [init -> java] Accumulated compiler times [init -> java] ---------------------------------------------------------- [init -> java] Total compilation time : 1.261 s [init -> java] Standard compilation : 1.261 s, Average : 0.013 s [init -> java] Bailed out compilation : 0.000 s, Average : nan s [init -> java] On stack replacement : 0.000 s, Average : nan s [init -> java] Invalidated : 0.000 s, Average : nan s [init -> java] [init -> java] C1 Compile Time: 1.241 s [init -> java] Setup time: 0.008 s [init -> java] Build HIR: 0.577 s [init -> java] Parse: 0.447 s [init -> java] Optimize blocks: 0.018 s [init -> java] GVN: 0.031 s [init -> java] Null checks elim: 0.018 s [init -> java] Range checks elim: 0.022 s [init -> java] Other: 0.041 s [init -> java] Emit LIR: 0.376 s [init -> java] LIR Gen: 0.135 s [init -> java] Linear Scan: 0.226 s [init -> java] Other: 0.015 s [init -> java] Code Emission: 0.129 s [init -> java] Code Installation: 0.135 s [init -> java] Other: 0.016 s [init -> java] [init -> java] Total compiled methods : 96 methods [init -> java] Standard compilation : 96 methods [init -> java] On stack replacement : 0 methods [init -> java] Total compiled bytecodes : 12835 bytes [init -> java] Standard compilation : 12835 bytes [init -> java] On stack replacement : 0 bytes [init -> java] Average compilation speed : 10180 bytes/s [init -> java] [init -> java] nmethod code size : 45600 bytes [init -> java] nmethod total size : 89948 bytes [init -> java] Warning: 8 dangling allocations at allocator destruction time [init -> java] Warning: 77 dangling allocations at allocator destruction time [init] child "java" exited with exit value 0 un script execution successful. On Sun, Mar 5, 2023 at 4:30 PM <users-request(a)lists.genode.org> wrote: > Send users mailing list submissions to > users(a)lists.genode.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.genode.org/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.genode.org > > You can reach the person managing the list at > users-owner(a)lists.genode.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. Porting OpenJDK in Genode. (YamiNI ReddY) > 2. Re: Porting OpenJDK in Genode. (Sebastian Sumpf) > 3. Re: Porting OpenJDK in Genode. (Timo Nicolai) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 5 Mar 2023 14:59:42 +0530 > From: YamiNI ReddY <yaminireddycareerlife(a)gmail.com> > To: Genode users mailing list <users(a)lists.genode.org> > Subject: Porting OpenJDK in Genode. > Message-ID: > < > CAD8FX-r06iERDerV6A+cysmHtSSOb-bGWuFdrAwOmEa2+dEoVQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Dear Genodians, > > I am writing to you to request your guidance on porting OpenJDK to run > simple java programs in Genode. As I have been looking into the > possibilities of running OpenJDK on Genode. > > I have been searching for documentation and resources on the subject, but I > have not been able to find any comprehensive guide that explains the > process in detail. > > Could you please guide me on the steps involved in porting OpenJDK to > Genode? > Additionally, if you know of any resources or documentation that could be > useful for me, I would be grateful if you could share them with me. > > Thank you very much for your time and consideration. > > Best regards, > Yamini >

2 1

Porting OpenJDK in Genode.
by YamiNI ReddY 06 Mar '23

06 Mar '23

Dear Genodians, I am writing to you to request your guidance on porting OpenJDK to run simple java programs in Genode. As I have been looking into the possibilities of running OpenJDK on Genode. I have been searching for documentation and resources on the subject, but I have not been able to find any comprehensive guide that explains the process in detail. Could you please guide me on the steps involved in porting OpenJDK to Genode? Additionally, if you know of any resources or documentation that could be useful for me, I would be grateful if you could share them with me. Thank you very much for your time and consideration. Best regards, Yamini

4 3

Trustzone with virt_qemu_arm_v8a
by Devashish Dewangan cs21m017 02 Mar '23

02 Mar '23

Dear Genodians, I am working with virt_qemu_arm_v8a, and I read the extensive documentation on how Genode has experimented with the Trustzone of ARM. I want to explore the Trustzone and run an application in the secure mode, but I wanted to know if it is possible to do with virt_qemu_arm. -- Regards, Devashish Dewangan CS21M017

4 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users