users

users@lists.genode.org

1 participants
2310 discussions

Cannot find dynamic linker binary.
by Edgar Klerks 10 Dec '13

10 Dec '13

Hi List, I am trying to add some libraries in my build.conf: LIBS = base libm But it doesn't seem to load. The error message I get is: [init] Could not open file "ld.lib.so" [init] Dynamically linked file found, but no dynamic linker binary present [init] unknown exception? [init] Dynamically linked file found, but no dynamic linker binary present [init] unknown exception? I am using the nova_x86_32 kernel, but on other kernels this also happens. If I remove libm my image works again. I haven't found anything to build a dynamic linker in the source. Steps I did: create build dir. add libports to etc/build.conf add my source repository to the build dir make prepare PKG=libc && make prepare PKG=stdcxx make run/something The run script starts up qemu. The kernel boots. And then in qemu it cannot find a linker binary. How should I add libraries to my project? I am probably missing some stupid step. Greets, Edgar Klerks

2 2

13.11 LiveCD?
by Lonnie Cumberland 09 Dec '13

09 Dec '13

Greetings All, I am new to the GENODE mailing list and am very excited about what I have seen thus far in the project. I am wondering if there is a LiveCD for the latest 13.11 version as the older 2010 version did not work well on my hardware as it would boot up and then after I made a selection it would freeze. I have a HP-Pavilion P7-1451PC 64-bit machine. Kind Regards and have a great day my friend, Lonnie T. Cumberland, Ph.D. < CONFIDENTIALITY NOTICE > The information contained in this communication is confidential and is intended only for the use of the recipient named above, and may be legally privileged and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, please resend to sender and delete the original from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to our official business should be understood as neither given nor endorsed.

2 1

Build system wipes include directory
by Edgar Klerks 08 Dec '13

08 Dec '13

Dear List, I am experimenting with genode and till now it went pretty good. I was building my project and had to rebuilt it a couple of times and suddenly the built broke. I thought no problem, thus I did a make clean. This wasn't helpful. Then I did a make cleanall, but now it wiped out the whole build/include directory. Is this intended behaviour or should I not put things there? At this stage it is just annoying, but I think this is a bug, because the tutorial puts the headers, which define the RPC interfaces. Can I prevent this behaviour? And I want to use c++ features like Strings instead of char *. How can I enable this? I recognize I need a library for this, but I can't find it in base. Thanks for your help! Greets, Edgar Klerks

2 2

noux - linux
by buzz heavyyear 03 Dec '13

03 Dec '13

Hi Just trying out Noux and unable to build. Followed the 11.02 release notes: Pulled a virgin genode from github.make prepare PKG=coreutilstool/create_builddir linux_x86 BUILD_DIR=build.linux_x86make run/noux Could anyone possibly give me a hint? Thanks in advanceNick make run/nouxusing run script /home/nick/genode_linux/genode/base-linux/run/envusing run script /home/nick/genode_linux/genode/ports/run/noux.runbuilding targets: core init drivers/timer noux/minimal server/log_terminal lib/libc_noux noux-pkg/coreutils spawn make core init drivers/timer noux/minimal server/log_terminal lib/libc_noux noux-pkg/coreutilsmake[1]: Entering directory `/home/nick/genode_linux/genode/build.linux_x86'checking library dependencies...Library-description file libc.mk is missingLibrary-description file libm.mk is missing Library platform MERGE platform.lib.a Library syscall COMPILE lx_clone.o COMPILE lx_syscall.o MERGE syscall.lib.a Library base-common COMPILE allocator/allocator_avl.o COMPILE allocator/slab.o COMPILE avl_tree/avl_tree.o COMPILE child/child.o COMPILE console/console.o COMPILE elf/elf_binary.o COMPILE env/debug.o COMPILE env/rm_session_mmap.o COMPILE heap/heap.o COMPILE heap/sliced_heap.o COMPILE ipc/ipc.o COMPILE lock/lock.o COMPILE main_bootstrap.o COMPILE process/process.o COMPILE server/common.o COMPILE server/server.o COMPILE signal/common.o COMPILE signal/signal.o COMPILE thread/trace.o MERGE base-common.lib.a Library startup COMPILE _main.o ASSEMBLE crt0.o MERGE startup.lib.a Library cxx COMPILE exception.o COMPILE guard.o COMPILE malloc_free.o COMPILE misc.o COMPILE new_delete.o COMPILE unwind.o MERGE supc++.o CONVERT supc++.o MERGE cxx.lib.a Library base COMPILE console/log_console.o COMPILE env/context_area.o COMPILE env/env.o COMPILE env/platform_env.o COMPILE thread.o COMPILE thread_linux.o MERGE base.lib.a Library alarm COMPILE alarm.o MERGE alarm.lib.a Library timer COMPILE main.o COMPILE platform_timer.o MERGE timer.lib.a Program drivers/timer/timer COMPILE empty.o LINK timer Library init_pd_args COMPILE pd_args.o MERGE init_pd_args.lib.a Library config COMPILE config.o MERGE config.lib.a Program init/init COMPILE main.o LINK init Program noux/minimal/noux COMPILE dummy_net.o COMPILE main.o LINK noux Library server COMPILE server.o MERGE server.lib.a Program server/log_terminal/log_terminal COMPILE main.o LINK log_terminal Program core/core COMPILE context_area.o COMPILE core_printf.o COMPILE cpu_session_component.o COMPILE cpu_session_extension.o COMPILE cpu_session_support.o COMPILE io_mem_session_component.o COMPILE main.o COMPILE pd_session_component.o COMPILE platform.o COMPILE platform_services.o COMPILE platform_thread.o COMPILE ram_session_component.o COMPILE ram_session_support.o COMPILE rom_session_component.o COMPILE signal_session_component.o COMPILE signal_source_component.o COMPILE thread.o COMPILE thread_linux.o COMPILE trace_session_component.o LINK coremake[1]: Leaving directory `/home/nick/genode_linux/genode/build.linux_x86'genode build completed/usr/local/genode-gcc/bin/genode-x86-strip: 'bin/coreutils/bin/*': No such file while executing"exec sh -c "[cross_dev_prefix]strip bin/coreutils/bin/*"" (file "/home/nick/genode_linux/genode/ports/run/noux.run" line 5) invoked from within"source $include_name" ("foreach" body line 3) invoked from within"foreach include_name [get_cmd_arg --include ""] { puts "using run script $include_name" source $include_name}" (file "/home/nick/genode_linux/genode/tool/run" line 803)make: *** [run/noux] Error 1

2 2

RE: Building for Raspberry Pi Ubuntu
by buzz heavyyear 02 Dec '13

02 Dec '13

Actually, just one question ... Am I right in thinking that there are no Ethernet/nic drivers for RPI in Genode? Cheers Nick --- Original Message --- From: "buzz heavyyear" <buzzheavyyear@...16...> Sent: 30 November 2013 11:59 To: "genode-main-lists" <genode-main(a)lists.sourceforge.net> Subject: RE: Building for Raspberry Pi Ubuntu Thanks Christian, looks like I'm going to have to start digging into RPi's drivers. Should be able to avoid dde_ipxe in that case. Thanks again CheersNick > Subject: RE: Building for Raspberry Pi Ubuntu > From: christian.helmuth@...1... > Date: Sat, 30 Nov 2013 12:50:49 +0100 > To: genode-main(a)lists.sourceforge.net > > Hi, > > Seems you're missing the driver for RPi's NIC since such a driver is AFAIK not part of our repos. BTW dde_ipxe is only enabled for x86 platforms with PCI networking hardware. > > Greets > -- > Christian Helmuth > Genode Labs > > http://www.genode-labs.com/ · http://genode.org/ · /ˈdʒiː.nəʊd/ > > Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden > Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth > > ------------------------------------------------------------------------------ > Rapidly troubleshoot problems before they affect your business. Most IT > organizations don't have a clear picture of how application performance > affects their revenue. With AppDynamics, you get 100% visibility into your > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! > http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk > _______________________________________________ > Genode-main mailing list > Genode-main(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/genode-main ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk _______________________________________________ Genode-main mailing list Genode-main(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main

2 2

Building for Raspberry Pi Ubuntu
by buzz heavyyear 30 Nov '13

30 Nov '13

Greetings, I'm trying to build the Pi platform. Running: gcc-arm-linux-gnueabi --version gives:arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 I've created the build.rpi directory with platform as hw_rpi. I then do a 'make run/demo' which results in : using run script /home/nick/genode-13.08/base-hw/run/envusing run script /home/nick/genode-13.08/os/run/demo.runspawn make core init drivers/timer server/nitpicker server/liquid_framebuffer app/launchpad app/scout test/nitpicker server/nitlog drivers/framebuffer drivers/pci drivers/inputmake[1]: Entering directory `/home/nick/genode-13.08/build.rpi'checking library dependencies...Skip target core/arndale because it requires platform_arndaleSkip target core/imx31 because it requires platform_imx31Skip target core/imx53 because it requires platform_imx53Skip target core/panda because it requires platform_pandaSkip target core/pbxa9 because it requires platform_pbxa9Skip target core/vea9x4/no_trustzone because it requires platform_vea9x4Skip target core/vea9x4/trustzone because it requires platform_vea9x4 trustzoneSkip target drivers/framebuffer/imx53 because it requires imx53Skip target drivers/framebuffer/omap4 because it requires omap4Skip target drivers/framebuffer/pl11x/pbxa9 because it requires pl11x platform_pbxa9Skip target drivers/framebuffer/pl11x/vea9x4 because it requires pl11x platform_vea9x4Skip target drivers/framebuffer/pl11x/vpb926 because it requires pl11x platform_vpb926Skip target drivers/framebuffer/sdl because it requires linux sdlSkip target drivers/input/fiasco_ux because it requires fiasco x86Skip target drivers/input/imx53 because it requires imx53Skip target drivers/input/ps2/pl050 because it requires pl050Skip target drivers/input/ps2/x86 because it requires x86 ps2Skip target drivers/pci/device_pd because it requires novaSkip target drivers/pci/x86 because it requires x86 Library platform MERGE platform.lib.a Library mini_c COMPILE abort.o COMPILE atol.o COMPILE malloc_free.o COMPILE memcmp.o COMPILE memset.o COMPILE mini_c.o COMPILE printf.o COMPILE snprintf.o COMPILE strlen.o COMPILE strtod.o COMPILE strtol.o COMPILE vsnprintf.o MERGE mini_c.lib.a Library libz_static COMPILE adler32.o COMPILE compress.o COMPILE crc32.o COMPILE deflate.o COMPILE gzio.o COMPILE infback.o COMPILE inffast.o COMPILE inflate.o COMPILE inftrees.o COMPILE trees.o COMPILE uncompr.o COMPILE zutil.o MERGE libz_static.lib.a Library libpng_static COMPILE png.o COMPILE pngerror.o COMPILE pngget.o COMPILE pngmem.o COMPILE pngpread.o COMPILE pngread.o COMPILE pngrio.o COMPILE pngrtran.o COMPILE pngrutil.o COMPILE pngset.o COMPILE pngtrans.o COMPILE pngwio.o COMPILE pngwrite.o COMPILE pngwtran.o COMPILE pngwutil.o MERGE libpng_static.lib.a Library cxx COMPILE exception.o COMPILE guard.o COMPILE malloc_free.o COMPILE misc.o COMPILE new_delete.o COMPILE unwind.o MERGE supc++.o CONVERT supc++.o MERGE cxx.lib.a Library syscall COMPILE syscall.o MERGE syscall.lib.a Library base-common COMPILE allocator/allocator_avl.o COMPILE allocator/slab.o COMPILE avl_tree/avl_tree.o COMPILE child/child.o COMPILE console/console.o COMPILE elf/elf_binary.o COMPILE heap/heap.o COMPILE heap/sliced_heap.o COMPILE ipc.o COMPILE ipc/ipc_marshal_cap.o COMPILE lock/lock.o COMPILE process/process.o COMPILE server/common.o COMPILE server/server.o COMPILE signal/common.o COMPILE signal/signal.o COMPILE thread/thread_bootstrap.o COMPILE thread/trace.o MERGE base-common.lib.a Library startup COMPILE _main.o ASSEMBLE crt0.o MERGE startup.lib.a Library base COMPILE console/log_console.o COMPILE env/context_area.o COMPILE env/env.o COMPILE env/reload_parent_cap.o COMPILE thread/thread.o COMPILE thread_support.o MERGE base.lib.a Library launchpad COMPILE launchpad.o MERGE launchpad.lib.a Library blit COMPILE blit.o MERGE blit.lib.a Library scout_widgets CONVERT binary_closed_icon.rgba.o CONVERT binary_downarrow.rgba.o CONVERT binary_kill_icon.rgba.o CONVERT binary_loadbar.rgba.o CONVERT binary_mono16.tff.o CONVERT binary_opened_icon.rgba.o CONVERT binary_redbar.rgba.o CONVERT binary_sizer.rgba.o CONVERT binary_slider.rgba.o CONVERT binary_titlebar.rgba.o CONVERT binary_uparrow.rgba.o CONVERT binary_vera16.tff.o CONVERT binary_vera18.tff.o CONVERT binary_vera20.tff.o CONVERT binary_vera24.tff.o CONVERT binary_verabi10.tff.o CONVERT binary_verai16.tff.o CONVERT binary_whitebar.rgba.o COMPILE elements.o COMPILE platform_genode.o COMPILE refracted_icon.o COMPILE scrollbar.o COMPILE sky_texture.o COMPILE startup.o COMPILE tick.o COMPILE widgets.o MERGE scout_widgets.lib.a Program app/scout/genode/scout COMPILE about.o CONVERT binary_about.rgba.o CONVERT binary_backward.rgba.o CONVERT binary_cover.rgba.o CONVERT binary_forward.rgba.o CONVERT binary_genode_logo.png.o CONVERT binary_home.rgba.o CONVERT binary_index.rgba.o CONVERT binary_ior.map.o CONVERT binary_launchpad.png.o CONVERT binary_liquid_fb_small.png.o CONVERT binary_nav_next.rgba.o CONVERT binary_nav_prev.rgba.o CONVERT binary_pointer.rgba.o CONVERT binary_setup.png.o CONVERT binary_x-ray_small.png.o COMPILE browser_window.o COMPILE doc.o COMPILE launcher.o COMPILE main.o COMPILE navbar.o COMPILE png_image.o LINK scout Program core/rpi/core COMPILE _main.occ1plus: error: unrecognized command line option ‘-std=gnu++11’make[3]: *** [_main.o] Error 1make[2]: *** [core.prg] Error 2make[1]: *** [gen_deps_and_build_targets] Error 2make[1]: Leaving directory `/home/nick/genode-13.08/build.rpi'Error: Genode build failedmake: *** [run/demo] Error 255 Any ideas on how to proceed? Best regardsNick

4 11

Deploy genode on arndale
by Claudio L. 29 Nov '13

29 Nov '13

Hello, I'm new to genode but not new to develoment. I'd like to port genode to my dev board (Odroid-XU). To begin, I built the foc_arndale target successfully following the instructions. What I couldn't find anywhere is instructions on how to build a boot image for u-boot, which files are needed in the image, entry point, etc. Where can I find that information? An explanation or a link would be helpful. As a constructive critic to the Genode project: Documentation is fantastic, but there's nothing on how to create a partition, put all the files and boot on x86, or for other platforms as well (at least something generic, saying that we need to load the kernel image (where to find it in the path), the 'core' executable, drivers, build an image, etc. The description on the website begins with how to configure the 'init' process, which says it is loaded by 'core', which is the first task started by the kernel. So how do we put it all together in an image? I think we'd need an image with the kernel, core, init, the uart driver, and perhaps an sd/mmc driver, so that init reads the rest of the services from the sd card. I noticed the build directory has a large file, fiasco.image (15 MB?), what does it contain? I have too many questions, please bear with me. Once I learn all this, I can write some tutorials for other people like me. Thanks, Claudio

3 7

Announcement: Genode OS Framework version 13.11 released
by Christian Helmuth 28 Nov '13

28 Nov '13

Today we are happy to announce a fresh release of Genode, which is the 22nd release of the framework since the first version in August 2008. In the box this time is a good deal of new features and changes ranging from the base framework over platform support to applications and libraries: - Base framework - Dynamic resource balancing - C++11 enabled by default - Improved event tracing - Low-level OS infrastructure - Gigabit networking using the Linux TCP/IP stack - Improved nitpicker GUI server - New terminal services - New file-system server for hybrid Genode/Linux systems - New C-runtime plugin for accessing block devices - Device drivers - Graphics and USB HID for Raspberry Pi - HDMI for Samsung Exynos 5 - Applications and libraries - Qt5 with support for OpenGL and QML - New file systems based on FUSE - Port of DosBox - Runtime environments - Advanced GNU debugger features - ARM TrustZone support on Freescale i.MX53 - Platforms - Base-HW enabled for dynamic workloads - Lifetime management for kernel object on NOVA - Ballooning support for L4Linux running on Fiasco.OC Extensive information is available in the release documentation: http://genode.org/documentation/release-notes/13.11 Best regards and have fun with Genode -- Christian Helmuth Genode Labs http://www.genode-labs.com/ · http://genode.org/ https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/ Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

1 0

FOSDEM microkernel devroom submission deadline nears (Dec 1st)
by Julian Stecklina 27 Nov '13

27 Nov '13

Hello fellow microkernel hackers, the deadline for submitting talks to our devroom in Brussels is December 1st. If you haven't already, consider submitting a talk. Details are in the original CfP mail: https://os.inf.tu-dresden.de/pipermail/l4-hackers/2013/006068.html Submissions are done via FOSDEM's Pentabarf: https://penta.fosdem.org/submission/ If Pentabarf doesn't work for you, please send your proposal or any other questions regarding the devroom to: microkernel-devroom@...86... See you in Brussels, Julian

1 0

thread cpu utilization
by Jilong Kuang - SISA 26 Nov '13

26 Nov '13

Hello, I'm wondering if there is a way to get thread CPU utilization info for Fiasco.OC kernel in Genode. Best regards, Jilong -- Jilong Kuang Ph.D. | Samsung Research America - Silicon Valley (SRA-SV) Senior Research Engineer, Computer Science Lab t: 408-544-2705 c: 951-318-2995 jilong.kuang@...60...<mailto:jilong.kuang@...60...> Please consider the environment before printing this email. This message is intended only for the named recipient(s) above and may contain confidential or privileged information or protected attorney work product. If you are not the intended recipient, any review, dissemination, distribution or copying is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this message and its attachments from your computer and dispose of all other copies or printouts. Thank you.

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users