users September 2014

users@lists.genode.org

24 participants
31 discussions

Genode onto i.mx53 qsb
by Joseph Lee 22 Sep '14

22 Sep '14

Hello, I'm trying to port genode onto i.mx53 quick start board. I followed the building steps in this thread. http://sourceforge.net/p/genode/mailman/genode-main/thread/9167aa55bacd5e3f… Now i get *uImage* in in the building directory(var/run/tz_vmm) with other two files (*boot_modules.s* and *image.elf*). The size of *uImage* is 7.5MB I loaded the *uImage* to memory address 0x70800000. When I tried to boot with the same memory address (bootm 0x70800000), i get the following error. ## Booting kernel from Legacy Image at 70800000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 7858693 Bytes = 7.5 MB Load Address: 70010000 Entry Point: 70010000 Verifying Checksum ... OK Uncompressing Kernel Image ... Error: inflate() returned -5 GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover resetting ... I tried again with another memory address (0x78000000) if there was overlap. Still I get the same result. I also checked if there is overlap with the physical address ranges used by u-boot bootloader using *readelf*. Here is the output Elf file type is EXEC (Executable file) Entry point 0x70010000 There are 3 program headers, starting at offset 52 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align EXIDX 0x077138 0x7007f138 0x7007f138 0x02578 0x02578 R 0x4 LOAD 0x008000 0x70010000 0x70010000 0x6ac64 0x6ac64 R E 0x8000 LOAD 0x073000 0x7007b000 0x7007b000 0x0b03c 0xd3ed5 RW 0x8000 What is missing? thanks in advance best regards, Joseph,

2 7

Demo , SDL initiate ptoblem
by Mhamad Hmad 22 Sep '14

22 Sep '14

Hi , i am trying to run the Demo on my Debian PC. i am using the release 14.8 ,I prepare the build directory for the Linux base platform. then, when i try to run it i got Invalid MIT-MAGIC-COOKIE-1 keyInvalid MIT-MAGIC-COOKIE-1 keycommandline read: [Genode] init -> fb_sdl ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.10 |~~~~~~~~~~~~~~~~~~~~~~~~~~ (c) 2001-2008 The world wide DirectFB Open Source Community (c) 2000-2004 Convergence (integrated media) GmbH ---------------------------------------------------------------- (*) DirectFB/Core: Single Application Core. (2012-05-20 12:49) (*) Direct/Memcpy: Using Generic 64bit memcpy() (!) Direct/Util: opening '/dev/fb0' and '/dev/fb/0' failed --> No such file or directory (!) DirectFB/FBDev: Error opening framebuffer device! (!) DirectFB/FBDev: Use 'fbdev' option or set FRAMEBUFFER environment variable. (!) DirectFB/Core: Could not initialize 'system_core' core! --> Initialization error! Quota exceeded! amount=24576, size=4096, consumed=24576 [init] upgrading quota donation for Env::CPU (8192 bytes) Quota exceeded! amount=32768, size=4096, consumed=32768 [init] upgrading quota donation for Env::CPU (8192 bytes) [init -> fb_sdl] SDL_Init failed [init] virtual void Genode::Child_policy::exit(int): child exited with exit value 0 [init -> launchpad] Could not open file "ld.lib.so" any advice ? thank in advance. best.

1 0

Problem when manipulating QT window geometry
by Marcus Nolte 17 Sep '14

17 Sep '14

Hello Everyone, I am currently experimenting a little with Genode 14.08. When playing around in Qt5, I encountered some problems when trying to change the geometry of a QMainWindow. I have an additional Genode::Thread running, which can trigger a geometry-change of the application's main window by methods provided by the MainWindow. When a change of the window's geometry is triggered, it seems as if the window-decorations are properly resized, but the QtWindow underneath is kept at its original size. Additionally, the thread which triggers the geometry-change is blocked (this holds true for the Genode::Thread, as well as for a QThread). Resizing the window with the mouse works properly. I took a look at the Nitpicker Qt-Plugin, where I noticed two things: 1. - There is some unused code in qnitpickerplatformwindow.cpp in QNitpickerPlatformWindow::handle_events(). Until now I did not dig into the Window_slave_policy, but the inactive code segment looks to me, as if it should change the QtWindow's geometry. 2. - The Processing seems to stop somewhere before returning the framebuffer of the the PlatformWindow when detaching / attaching it from / to the rm_ssession. Since I'm not quite familiar with all the internal Nitpicker / Qt stuff, it would be great if anyone with a little more experience could provide some help. ;-) - Or am I even trying something which is not intended? Cheers Marcus

3 5

Android run time porting
by Paramesh Oddepally 13 Sep '14

13 Sep '14

Hello Norman, I'm a member of the IIT-Madras team that currently working on Genode. We are planning to port android runtime(ART) on to Genode. Can you guide us what is the best strategy that we need follow. -- Thanks and Regards, Paramesh M.Tech. Department of Computer Science and Engineering I.I.T. Madras, Chennai, India

2 2

VMM on i.mx53 quick start board
by Tewodrose Kassa 12 Sep '14

12 Sep '14

Hi, I want to the use VMM on i.mx53 quick start board. I followed the following building steps and managed to produce the image file in the build dirctory (var/run/tz_vmm/uImage). I am using the master branch of Genode's mainline repository. * tool/create_builddir hw_imx53 BUILD_DIR=hw_imx53 cd hw_imx53 echo "SPECS += trustzone" >> etc/specs.conf echo "RUN_OPT = --target uboot" >> etc/build.conf make run/tz_vmm * And then, i loaded the uImage to address 0x70010000 using u-boot command as follows. *MX53-LOCO U-Boot > ext2load mmc 0 0x70010000 /home/lucid/uImage* Loading file "/home/lucid/uImage" from mmc device 0:1 (xxa1) 7858766 bytes read Finally, i tried to boot the demo and i got the following error. Anyone knows about this? *MX53-LOCO U-Boot > bootm 0x70010000* ## Booting kernel from Legacy Image at 70010000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 7858702 Bytes = 7.5 MB Load Address: 70010000 Entry Point: 70010000 Verifying Checksum ... OK * Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover resetting ...*

2 1

Re: Some questions about performance optimization related to GUIframework on Genode
by 王硕 10 Sep '14

10 Sep '14

Hello Norman, In Genode, it takes approximately 3 seconds for qt_launchpad to launch, and more than 1 seconds for other apps to launch. This is too slow, so my task is to reduce the launch time of qt_launchpad and apps. But I don't know what the reason of the low performance is. So I turn to you for some advice. I use Rtc (\os\src\drivers\rtc\x86) to record the launch time of qt_launchpad and apps as listed below: in main.cpp of qt_launchpad: int main(int argc, char *argv[]) { /*Use Rtc to record the time*/ ... ... launchpad->show(); /*Use Rtc to record the time again*/ ... ... } in launch_entry.cpp of qt_launchpad: void Launch_entry::on_launchButton_clicked() { /*Use Rtc to record the time*/ _launchpad->start_child(_filename, ...); /*Use Rtc to record the time again*/ } Shuo Wang, University of Chinese Academy of Sciences. ----‍--‍--‍Original mail----‍--‍-- Sender: norman.feske <norman.feske@...1...> (by genode-main-bounces(a)lists.sourceforge.net ) Time: 2014-09-01 (Mon) 12:00 (UTC+02:00) Receiver: genode-main <genode-main(a)lists.sourceforge.net> ‍ ‍‍ Hello Shuo Wang, > The Git branch of our genode is listed below: > https://github.com/kloisiie/vsos thanks for making your modifications publicly available. But I am wondering: Why haven't you just forked the Genode repository? See https://github.com/genodelabs/genode By having imported a snapshot of the source code to a new repository, you removed all the history and cannot easily follow the mainline development. For me, this makes it almost impossible to spot your modifications. Why haven't you just applied your changes as a topic branch on top of the regular Genode repository? Moreover, why have you removed the LICENSE file from top-level directory? The license is important information and should always be prominently visible. I would also recommend to keep the original README file or, at least, provide a link to the original Genode repository. > * Have you tried to run your GUI application on base-linux? If yes, > have you compared its performance to the same application compiled for > native Linux w/o Genode? > Our apps is Fiasco.OC-specific, so I don't know how to run these apps on > base-linux. > > * On base-linux, you could use normal Linux profiling tools such as > oprofile to find out where the CPU time goes. > Please recommend some similar tools on base-foc. There is no such tool for base-foc. For this reason, I recommended to run the application on base-linux in the first place. Even if you application depends on Fiasco.OC, you might still use any of the other (portable) example applications to investigate an eventual performance problem of Qt. First check if the behavior that you noticed can be reproduced with one of those example applications. If that is the case, run the same application on Linux and use oprofile to investigate. > * Can you make a Git branch with your application publicly available‍ > https://github.com/kloisiie/vsos‍ > To run the vsos, use > $ ./create_builddir fox_x86_32 build_dir=~/<build-directory> > to create a build directory, and then execute > $ make run/verify > in build directory. Unfortunately, I am not able to compile it. I get an error as follows: /open/incoming/vsos/base/include/base/rpc_server.h:152:41: error: ‘l4_utcb_id’ is not a member of ‘Fiasco’ The type 'l4_utcb_id' does not exist in the 'base-foc/contrib' source tree. It seems like you changed the kernel but invoking 'make prepare' within 'base-foc' fetches the original kernel. Best regards Norman -- Dr.-Ing. Norman Feske Genode Labs http://www.genode-labs.com · http://genode.org Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ genode-main mailing list genode-main(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main

4 9

Help testing arora,qt5 and sdl examples on RaspberryPI
by Reinier Millo Sánchez 09 Sep '14

09 Sep '14

Hi I'm testing some examples of Genode on RaspberryPI, but i got some troubles. I'm trying to test arora, qt5 and sdl examples. I'm using Genode 14.05. I have configured the following ports: ./tool/ports/prepare_port arora ./tool/ports/prepare_port dde-linux ./tool/ports/prepare_port libc ./tool/ports/prepare_port stdcxx ./tool/ports/prepare_port mesa ./tool/ports/prepare_port zlib ./tool/ports/prepare_port icu ./tool/ports/prepare_port jpeg ./tool/ports/prepare_port libpng ./tool/ports/prepare_port openssl ./tool/ports/prepare_port freetype ./tool/ports/prepare_port lwip ./tool/ports/prepare_port qoost ./tool/ports/prepare_port bintuils ./tool/ports/prepare_port sdl make prepare PKG=qt5 (on libports) On etc/build.conf have activated the following repositories: REPOSITORIES += $(GENODE_DIR)/repos/base-hw REPOSITORIES += $(GENODE_DIR)/repos/base REPOSITORIES += $(GENODE_DIR)/repos/os REPOSITORIES += $(GENODE_DIR)/repos/demo REPOSITORIES += $(GENODE_DIR)/repos/libports REPOSITORIES += $(GENODE_DIR)/repos/ports REPOSITORIES += $(GENODE_DIR)/repos/dde_linux REPOSITORIES += $(GENODE_DIR)/repos/gems To compile the example have used the following command lines: make run/arora make run/qt5 make run/sdl During the compilation process of the examples, get this line, but finally the elf image is generated: /usr/local/genode-gcc/bin/genode-arm-ld: BFD (GNU Binutils) 2.22 assertion fail ../../../../contrib/binutils-2.22/bfd/elf32-arm.c:12049 To generate the img file from the elf image have used: /usr/local/genode-gcc/bin/genode-arm-objcopy -Obinary var/run/arora/image.elf genode_arora.img /usr/local/genode-gcc/bin/genode-arm-objcopy -Obinary var/run/qt5/image.elf genode_qt5.img /usr/local/genode-gcc/bin/genode-arm-objcopy -Obinary var/run/sdl/image.elf genode_sdl.img To test this img on the RPI have created the config.txt file with: kernel=<file>.img kernel_address=0x00800000 To test the examples i'm using a RPI model B and a version of QEMU with functional support for RPI: https://github.com/Torlus/qemu/ When test the elf images with QEMU get the output on serial console, but this version of QEMU seems like don't support framebuffer emulation. After that have tried to run examples on the real PI but only get the coloured screen. I have compiled and tested on th RPI the Demo and Hello examples. If somebody can help me? Best regards -- Lic. Reinier Millo SÃ¡nchez Centro de Estudios de InformÃ¡tica Universidad Central "Marta Abreu" de Las Villas

3 6

tz_vmm script issue
by chirag garg 09 Sep '14

09 Sep '14

I was trying to compile the code for imx53 board by using following script : *RUN_OPT="--target uboot" make run/tz_vmm* But it is throwing the following error : Download initramfs ... child process exited abnormally while executing "exec >& /dev/null wget -c -O bin/initrd.gz $init_uri" invoked from within "if {![file exists bin/initrd.gz]} { puts "Download initramfs ..." exec >& /dev/null wget -c -O bin/initrd.gz $init_uri }" (file "/home/chirag/Desktop/genode/repos/os/run/tz_vmm.run" line 40) invoked from within "source $include_name" ("foreach" body line 3) invoked from within "foreach include_name [get_cmd_arg --include ""] { puts "using run script $include_name" source $include_name }" (file "/home/chirag/Desktop/genode/tool/run" line 947) make: *** [run/tz_vmm] Error 1 *What could be the problem ??* Regards Chirag Garg IIT Madras , Rise Lab

2 1

tz_vmm script issue
by chirag garg 09 Sep '14

09 Sep '14

I was trying to compile the code for imx53 board by using following script : *RUN_OPT="--target uboot" make run/tz_vmm* But it is throwing the following error : Download initramfs ... child process exited abnormally while executing "exec >& /dev/null wget -c -O bin/initrd.gz $init_uri" invoked from within "if {![file exists bin/initrd.gz]} { puts "Download initramfs ..." exec >& /dev/null wget -c -O bin/initrd.gz $init_uri }" (file "/home/chirag/Desktop/genode/repos/os/run/tz_vmm.run" line 40) invoked from within "source $include_name" ("foreach" body line 3) invoked from within "foreach include_name [get_cmd_arg --include ""] { puts "using run script $include_name" source $include_name }" (file "/home/chirag/Desktop/genode/tool/run" line 947) make: *** [run/tz_vmm] Error 1 *what could be the problem ??* Regards Chirag Garg IIT Madras , Rise Lab

1 0

TrustZone on imx6
by chirag garg 09 Sep '14

09 Sep '14

Hi all, As Genode is successfully running on imx6 board. Now , I want to enable the TrustZone on imx6 processor. As i read on Page http://www.genode.org/documentation/articles/trustzone I have to build TrustZone aware Hypervisor. For that i have to start Monitor Mode and nitialize a corresponding exception vector that is used when a monitor-mode exception is raised. Is it right direction to begin and help me where should i start looking in imx53 code as a reference code to do this. Regards Chirag Garg IIT Madras , Rise Lab

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users September 2014