Hi, Can anyone help out. I'm trying to create the Turmvilla scenario on my Lenovo X201 By following the setup file as compiled by@...357... https://github.com/cproc: https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt I'm trying to understand these parts of the instructions, a bit confusing : After creating the 3 partitions and installing the *Create the Linux VM* * - attach the 3 image files from the /genode directory *
* >>> How do I attach the image files "linux.vdi" and "home.vmdk" to the same Linux VM. "linux.vdi" is of 32 GB while >>>"home.vmdk" is created from /dev/sda2 (at the host disk) which is 60 GB. I tried to attach both image files to the same >>> SATA controller using the **storage settings of the VM - is this correct ?*
* - add a permanent shared folder (for the generated Genode binaries) - start the VM - install Linux - if the Linux installer supports it, create an encrypted /home partition on /dev/sdb *
* >>> "/dev/sdb" refers to the partition within the Guest Linux VM that I am installing ? Is it referring to the "home.vmdk" ?** >>> How do I specify /home on this partition /dev/sdb ? There are no options for input of this folder name.*
*Appreciate if someone can help. Thanks so much.*
Hello Vincent,
On 10/07/2015 03:23 AM, Vincent Digital wrote:
Hi, Can anyone help out. I'm trying to create the Turmvilla scenario on my Lenovo X201 By following the setup file as compiled by@...357... https://github.com/cproc: https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt I'm trying to understand these parts of the instructions, a bit confusing : After creating the 3 partitions and installing the *Create the Linux VM*
- attach the 3 image files from the /genode directory *
How do I attach the image files "linux.vdi" and "home.vmdk" to the same Linux VM. "linux.vdi" is of 32 GB while "home.vmdk" is created from /dev/sda2 (at the host disk) which is 60 GB. I tried to attach both image files to the same SATA controller using the **storage settings of the VM - is this correct ?
yes
- add a permanent shared folder (for the generated Genode binaries) -
start the VM - install Linux - if the Linux installer supports it, create an encrypted /home partition on /dev/sdb *
"/dev/sdb" refers to the partition within the Guest Linux VM that I am installing ? Is it referring to the "home.vmdk" ?**
correct
How do I specify /home on this partition /dev/sdb ? There are no options for input of this folder name.*
Which Linux distribution are you installing as Guest VM?
Christian
Hi, Christian,
Thanks for clarifying. I'm using Ubuntu 14.04 32-bit OS as Guest VM. I've figured out the /home mapping based on the presentation that Norman created for his presentation earlier this year.
The final issue that I have not get it working is the GRUB configuration https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt . It could not work based on the instructions below :
#!/bin/sh
cat <<EOF
menuentry 'Genode' {
insmod ext2
set root='hd0,msdos1'
legacy_configfile /boot/grub/menu.lst
}
EOF
- make the file executable
- $ sudo chmod +x /etc/grub.d/42_genode
- update the GRUB configuration
- $ sudo update-grub
- reboot and start Genode or keep running VirtualBox on Linux
- $ xinit /usr/bin/VBoxSDL --startvm "<name of Linux VM>"
On reboot, what is the expected result, am I supposed to be able to choose between boot-up into Genode or back into the Rescue Linux in the 3rd partition ? However, on reboot, I was not able to boot into Genode, just boot straight into the Rescue Linux O/S in the 3rd partition. Is there a sample grub2 configuration that I can use to select bootup either into Genode or the Rescue Linux O/S.
Thanks
On Wed, Oct 7, 2015 at 11:57 PM, Christian Prochaska < christian.prochaska@...1...> wrote:
Hello Vincent,
On 10/07/2015 03:23 AM, Vincent Digital wrote:
Hi, Can anyone help out. I'm trying to create the Turmvilla scenario on
my
Lenovo X201 By following the setup file as compiled by@...357... https://github.com/cproc:
https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt
I'm trying to understand these parts of the instructions, a bit
confusing :
After creating the 3 partitions and installing the *Create the Linux VM*
- attach the 3 image files from the /genode directory *
How do I attach the image files "linux.vdi" and "home.vmdk" to the
same Linux VM. "linux.vdi" is of 32 GB while
"home.vmdk" is created from /dev/sda2 (at the host disk) which is 60
GB. I tried to attach both image files to the same
SATA controller using the **storage settings of the VM - is this
correct ?
yes
- add a permanent shared folder (for the generated Genode binaries) -
start the VM - install Linux - if the Linux installer supports it,
create
an encrypted /home partition on /dev/sdb *
"/dev/sdb" refers to the partition within the Guest Linux VM that I
am installing ? Is it referring to the "home.vmdk" ?**
correct
How do I specify /home on this partition /dev/sdb ? There are no
options for input of this folder name.*
Which Linux distribution are you installing as Guest VM?
Christian
Full-scale, agent-less Infrastructure Monitoring from a single dashboard Integrate with 40+ ManageEngine ITSM Solutions for complete visibility Physical-Virtual-Cloud Infrastructure monitoring from one console Real user monitoring with APM Insights and performance trend reports Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140 _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
Hello Vincent,
Perhaps removing the lines
GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true
from the file /etc/default/grub and doing a sudo update-grub one more time will show you the grub menu.
Harm
On Fri, Oct 9, 2015 at 5:18 PM, Vincent Digital <vdigital3800@...9...> wrote:
Hi, Christian,
Thanks for clarifying. I'm using Ubuntu 14.04 32-bit OS as Guest VM. I've figured out the /home mapping based on the presentation that Norman created for his presentation earlier this year.
The final issue that I have not get it working is the GRUB configuration https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt . It could not work based on the instructions below :
#!/bin/sh
cat <<EOF
menuentry 'Genode' {
insmod ext2
set root='hd0,msdos1'
legacy_configfile /boot/grub/menu.lst
}
EOF
make the file executable
$ sudo chmod +x /etc/grub.d/42_genode
update the GRUB configuration
$ sudo update-grub
reboot and start Genode or keep running VirtualBox on Linux
$ xinit /usr/bin/VBoxSDL --startvm "<name of Linux VM>"
On reboot, what is the expected result, am I supposed to be able to choose between boot-up into Genode or back into the Rescue Linux in the 3rd partition ? However, on reboot, I was not able to boot into Genode, just boot straight into the Rescue Linux O/S in the 3rd partition. Is there a sample grub2 configuration that I can use to select bootup either into Genode or the Rescue Linux O/S.
Thanks
On Wed, Oct 7, 2015 at 11:57 PM, Christian Prochaska < christian.prochaska@...1...> wrote:
Hello Vincent,
On 10/07/2015 03:23 AM, Vincent Digital wrote:
Hi, Can anyone help out. I'm trying to create the Turmvilla scenario on
my
Lenovo X201 By following the setup file as compiled by@...357... https://github.com/cproc:
https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt
I'm trying to understand these parts of the instructions, a bit
confusing :
After creating the 3 partitions and installing the *Create the Linux VM*
- attach the 3 image files from the /genode directory *
How do I attach the image files "linux.vdi" and "home.vmdk" to the
same Linux VM. "linux.vdi" is of 32 GB while
"home.vmdk" is created from /dev/sda2 (at the host disk) which is 60
GB. I tried to attach both image files to the same
SATA controller using the **storage settings of the VM - is this
correct ?
yes
- add a permanent shared folder (for the generated Genode binaries) -
start the VM - install Linux - if the Linux installer supports it,
create
an encrypted /home partition on /dev/sdb *
"/dev/sdb" refers to the partition within the Guest Linux VM that I
am installing ? Is it referring to the "home.vmdk" ?**
correct
How do I specify /home on this partition /dev/sdb ? There are no
options for input of this folder name.*
Which Linux distribution are you installing as Guest VM?
Christian
Full-scale, agent-less Infrastructure Monitoring from a single dashboard Integrate with 40+ ManageEngine ITSM Solutions for complete visibility Physical-Virtual-Cloud Infrastructure monitoring from one console Real user monitoring with APM Insights and performance trend reports Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140 _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
Hi, Harm,
Thanks. It worked. I could boot up into Genode into CLI Monitor. However, when I start Linux subsystem, the window opens up and hanged. Guess I have to configure Intel AMT to see what's wrong.
Regards.
On Sat, Oct 10, 2015 at 12:32 AM, Harm de Vries <vries101@...9...> wrote:
Hello Vincent,
Perhaps removing the lines
GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true
from the file /etc/default/grub and doing a sudo update-grub one more time will show you the grub menu.
Harm
On Fri, Oct 9, 2015 at 5:18 PM, Vincent Digital <vdigital3800@...9...> wrote:
Hi, Christian,
Thanks for clarifying. I'm using Ubuntu 14.04 32-bit OS as Guest VM. I've figured out the /home mapping based on the presentation that Norman created for his presentation earlier this year.
The final issue that I have not get it working is the GRUB configuration https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt . It could not work based on the instructions below :
#!/bin/sh
cat <<EOF
menuentry 'Genode' {
insmod ext2
set root='hd0,msdos1'
legacy_configfile /boot/grub/menu.lst
}
EOF
make the file executable
$ sudo chmod +x /etc/grub.d/42_genode
update the GRUB configuration
$ sudo update-grub
reboot and start Genode or keep running VirtualBox on Linux
$ xinit /usr/bin/VBoxSDL --startvm "<name of Linux VM>"
On reboot, what is the expected result, am I supposed to be able to choose between boot-up into Genode or back into the Rescue Linux in the 3rd partition ? However, on reboot, I was not able to boot into Genode, just boot straight into the Rescue Linux O/S in the 3rd partition. Is there a sample grub2 configuration that I can use to select bootup either into Genode or the Rescue Linux O/S.
Thanks
On Wed, Oct 7, 2015 at 11:57 PM, Christian Prochaska < christian.prochaska@...1...> wrote:
Hello Vincent,
On 10/07/2015 03:23 AM, Vincent Digital wrote:
Hi, Can anyone help out. I'm trying to create the Turmvilla scenario
on my
Lenovo X201 By following the setup file as compiled by@...357... https://github.com/cproc:
https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt
I'm trying to understand these parts of the instructions, a bit
confusing :
After creating the 3 partitions and installing the *Create the Linux
VM*
- attach the 3 image files from the /genode directory *
> How do I attach the image files "linux.vdi" and "home.vmdk" to the
same Linux VM. "linux.vdi" is of 32 GB while
>"home.vmdk" is created from /dev/sda2 (at the host disk) which is
60 GB. I tried to attach both image files to the same
> SATA controller using the **storage settings of the VM - is this
correct ?
yes
- add a permanent shared folder (for the generated Genode binaries)
start the VM - install Linux - if the Linux installer supports it,
create
an encrypted /home partition on /dev/sdb *
> "/dev/sdb" refers to the partition within the Guest Linux VM that
I am installing ? Is it referring to the "home.vmdk" ?**
correct
> How do I specify /home on this partition /dev/sdb ? There are no
options for input of this folder name.*
Which Linux distribution are you installing as Guest VM?
Christian
Full-scale, agent-less Infrastructure Monitoring from a single dashboard Integrate with 40+ ManageEngine ITSM Solutions for complete visibility Physical-Virtual-Cloud Infrastructure monitoring from one console Real user monitoring with APM Insights and performance trend reports Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140 _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
Hello Vincent,
Yes, Intel AMT is very useful to determine what is going wrong. Note however that trying to start a 64-bit virtual machine will fail but it doesn't result in an error in the log.
Harm
On Mon, Oct 12, 2015 at 4:35 PM, Vincent Digital <vdigital3800@...9...> wrote:
Hi, Harm,
Thanks. It worked. I could boot up into Genode into CLI Monitor. However, when I start Linux subsystem, the window opens up and hanged. Guess I have to configure Intel AMT to see what's wrong.
Regards.
On Sat, Oct 10, 2015 at 12:32 AM, Harm de Vries <vries101@...9...> wrote:
Hello Vincent,
Perhaps removing the lines
GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true
from the file /etc/default/grub and doing a sudo update-grub one more time will show you the grub menu.
Harm
On Fri, Oct 9, 2015 at 5:18 PM, Vincent Digital <vdigital3800@...9...> wrote:
Hi, Christian,
Thanks for clarifying. I'm using Ubuntu 14.04 32-bit OS as Guest VM. I've figured out the /home mapping based on the presentation that Norman created for his presentation earlier this year.
The final issue that I have not get it working is the GRUB configuration
https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt . It could not work based on the instructions below :
#!/bin/sh
cat <<EOF
menuentry 'Genode' {
insmod ext2
set root='hd0,msdos1'
legacy_configfile /boot/grub/menu.lst
}
EOF
make the file executable
$ sudo chmod +x /etc/grub.d/42_genode
update the GRUB configuration
$ sudo update-grub
reboot and start Genode or keep running VirtualBox on Linux
$ xinit /usr/bin/VBoxSDL --startvm "<name of Linux VM>"
On reboot, what is the expected result, am I supposed to be able to choose between boot-up into Genode or back into the Rescue Linux in the 3rd partition ? However, on reboot, I was not able to boot into Genode, just boot straight into the Rescue Linux O/S in the 3rd partition. Is there a sample grub2 configuration that I can use to select bootup either into Genode or the Rescue Linux O/S.
Thanks
On Wed, Oct 7, 2015 at 11:57 PM, Christian Prochaska < christian.prochaska@...1...> wrote:
Hello Vincent,
On 10/07/2015 03:23 AM, Vincent Digital wrote:
Hi, Can anyone help out. I'm trying to create the Turmvilla scenario
on my
Lenovo X201 By following the setup file as compiled by@...357... https://github.com/cproc:
https://github.com/cproc/genode/blob/vbox_vm_linux/doc/virtualbox_setup.txt
I'm trying to understand these parts of the instructions, a bit
confusing :
After creating the 3 partitions and installing the *Create the Linux
VM*
- attach the 3 image files from the /genode directory *
>> How do I attach the image files "linux.vdi" and "home.vmdk" to
the same Linux VM. "linux.vdi" is of 32 GB while
>>"home.vmdk" is created from /dev/sda2 (at the host disk) which is
60 GB. I tried to attach both image files to the same
>> SATA controller using the **storage settings of the VM - is this
correct ?
yes
- add a permanent shared folder (for the generated Genode
binaries) -
start the VM - install Linux - if the Linux installer supports it,
create
an encrypted /home partition on /dev/sdb *
>> "/dev/sdb" refers to the partition within the Guest Linux VM that
I am installing ? Is it referring to the "home.vmdk" ?**
correct
>> How do I specify /home on this partition /dev/sdb ? There are no
options for input of this folder name.*
Which Linux distribution are you installing as Guest VM?
Christian
Full-scale, agent-less Infrastructure Monitoring from a single dashboard Integrate with 40+ ManageEngine ITSM Solutions for complete visibility Physical-Virtual-Cloud Infrastructure monitoring from one console Real user monitoring with APM Insights and performance trend reports Learn More http://pubads.g.doubleclick.net/gampad/clk?id=247754911&iu=/4140 _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
-
Christian Prochaska -
Harm de Vries -
Vincent Digital