Thanks, Michael for suggesting the uboot tools.
I generated the uImage successfully. Now to boot the image on QEMU I first tried to get the log.img using *make run/log KERNEL=hw BOARD=rpi3 VERBOSE=* by adding QEMU_RUN_OPT := --include image/disk But could not figure out to resolve the problem that the kernel is not getting loaded. Also, guide me if I can do something with uImage(var/run/log/boot/uImage) to get the GUI in QEMU.
Best..., DHIRAJ
On Sat, Feb 4, 2023 at 4:30 PM Michael Grunditz michael.grunditz@gmail.com wrote:
On Sat, 4 Feb 2023 at 05:58, DHIRAJ PRAJAPATI dhirajprajapati96@gmail.com wrote:
Thanks, Martin for your quick response.
I followed your steps and generated the genode/build/arm_v8a/var/run/log/boot/image.elf. While going to the real hardware I got stuck for boot/uImage(var/run/log/boot/uImage) getting the following error. Kindly guide me on how to proceed further.
Install the tool "mkimage". In ubuntu: sudo apt-get install u-boot-tools
Michael
Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users