Hello,
another option, I forgot to mention, is to try to setup the report_dump component [0]. In case Sculpt OS comes up far enough, it would dump all logs kept in memory to your USB stick, which can be extracted afterwards from the USB stick. However, this would require another machine, where Sculpt OS boots up fine and you can configure it according to [0].
[0] https://genode.org/documentation/articles/sculpt-vc#Sculpt_as_a_hardware-pro...
Cheers,
Alex.
On 06.06.23 02:04, David Pfeiffer wrote:
Sorry for the delay in replying.
The standard pre-built images do not boot on my desktop machine either, but they do boot on my old Thinkpad X230.
I will try the debug.img as soon as I can and will let you know the results.
Thanks, Dave
On Fri, Jun 2, 2023 at 5:30 PM Alexander Boettcher < alexander.boettcher@genode-labs.com> wrote:
Hello again,
On 02.06.23 16:34, Alexander Boettcher wrote:
So then I simply tried to boot from a prebuilt image and upon booting I
couldn't get past the Genode boot.png
I'm running on a Lenovo YOGA intel i7-8565U, building on Void Linux.
it seems to be an very early boot issue, which will not be easy to debug
remotely (- to get an idea follow the thread of [0] for).
In principle, your notebook should be fine. So, either try another
machine if you just want to get an idea of Sculpt, or we may try different
things along the lines of [0], if you are interested.
I created and uploaded a simple debug image [0], which contains several boot entries which tries different drivers. Can you please test and tell me, if any and in case, which entries work for you ?
Cheers,
Alex.
[0] https://depot.genode.org/alex-ab/images/debug.img
-- Alexander Boettcher Genode Labs
https://www.genodians.org - https://www.genode.org
Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users
Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users