Hi,
I want to the use VMM on i.mx53 quick start board. I followed the following building steps and managed to produce the image file in the build dirctory (var/run/tz_vmm/uImage). I am using the master branch of Genode's mainline repository.
* tool/create_builddir hw_imx53 BUILD_DIR=hw_imx53 cd hw_imx53 echo "SPECS += trustzone" >> etc/specs.conf echo "RUN_OPT = --target uboot"
etc/build.conf make run/tz_vmm *
And then, i loaded the uImage to address 0x70010000 using u-boot command as follows.
*MX53-LOCO U-Boot > ext2load mmc 0 0x70010000 /home/lucid/uImage* Loading file "/home/lucid/uImage" from mmc device 0:1 (xxa1) 7858766 bytes read
Finally, i tried to boot the demo and i got the following error. Anyone knows about this?
*MX53-LOCO U-Boot > bootm 0x70010000* ## Booting kernel from Legacy Image at 70010000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 7858702 Bytes = 7.5 MB Load Address: 70010000 Entry Point: 70010000 Verifying Checksum ... OK
* Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover resetting ...*