I've tried using 'sudo sync', but still nothing different
this is my SD Card Output after doing 'dd'
[image: Inline image 1]
then this is the setup of my serial line's minicom [image: Inline image 2]
[image: Inline image 3]
after I saved my setup and exit it won't initialized on my minicom I've connect all I/O device and pandaboard power
On Thu, Mar 27, 2014 at 5:33 PM, Stefan Kalkowski < stefan.kalkowski@...1...> wrote:
Hi Alif,
On 03/26/2014 06:38 AM, Alif Hamka wrote:
hello, my name is alif, I'm from Computer Engineering, EEPIS. I just start learning about gnode and really interested about this framework. What I want to ask is I've interested with this article http://genode.org/documentation/articles/pandaboard I've download and unpack the image onto my SD Card. Is there any steps before I can boot this image on my pandaboard? I've tried using minicom just like when using linux on pandaboard. But it won't initialized. Please help me.
Actually, all steps required are documented in that article. So if you've followed them step by step, the demo should work. Maybe, you should do a 'sudo sync' after you've copied the image to the SD card via 'zcat' or 'dd'.
Maybe you can post the output of your serial line, after you booted the Pandaboard with the prepared SD card? BTW. the serial line should be configured to use 115200 as baudrate.
Regards Stefan
Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and
their
applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech
Genode-main mailing list Genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
-- Stefan Kalkowski Genode Labs
http://www.genode-labs.com/ · http://genode.org/
Genode-main mailing list Genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main