Hello all,
We've tried to run a basic test-printf script on a Freescale i.MX6 sabrelite board. Based on thishttp://sourceforge.net/p/genode/mailman/message/31760885/, we implemented the necessary files. We had also come across an i.MX6 branch by Nikolay Golikov stating that he had a preliminary port of i.MX6 here: https://github.com/decaprox/genode/tree/i.mx6
We ran RUN_OPT="--target=uboot" make run/printf to see if it does print "-1 = -1 = -1" to the serial console (tested with gtkterm).
We ran the boot image uImage through TFTP at load address 0x10800000. It loads the kernel (267.9 kB) but stops at "Loading kernel".
How do we know if the kernel is indeed running, or are we checking the right UART ports? (we checked UART1)
I gave "console=ttymxc0, 115200" as bootargs in u-boot. Any suggestions on how to proceed? Because we are literally stuck.
Also, is there a good debugging tool for testing the genode environment on direct hardware?
Thanks in advance Aditya Kousik