Hi,
Following now works - restart with amttool.
Also RUN_OPT="--target amt" make run/printf now seems to try to connect to remote pc.
Nevertheless the simple printf fails. (output attached below inline.)
It seems like remote machine gets connected, restarts. Afterwards it boots normally. In the output file there are two lines amtterm: RUN_SOL -> ERROR (failure) amtterm: ERROR: redir_data: unknown r->buf 0x29 After I read http://osdir.com/ml/general/2012-07/msg20818.html it seems like expected that SOL breaks over reboot. It also seems that the genode script tries to connect shortly afterwards. amtterm: CONNECT -> INIT (redirection initialization) the thing is,that the other computer boots its os while the script is still running and does not seem to boot genode over lan. I also tried to change the boot sequence of the x201 to LAN/CD/HARDDISC.
Should it work in that way or is something additional needed.
---
I also tried the following: - I created a partition with genode on the x201 where the demo boots from. - from first I triggered RUN_OPT="--target amt" make run/demo - on the x201 i manually selcted the genode demo in grub and started it. On the first pc the last output which is seen is: serial-over-lan redirection ok connected now, use ^] to escape And nothing afterwards.
If this works amtterm can be invoked by user> amtterm 10.1.1.2 -u admin -p <your password> and should give you a connection.
Must something be configured while building a genode/nova system so that output COM3 is used?
Best regards, Wolfgang
building targets: core init test/printf spawn make core init test/printf make[1]: Betrete Verzeichnis '/home/wolfgang/genrep/build.cc' checking library dependencies... Library platform Library cxx Library syscall Library startup Library base-common Library base Library init_pd_args Library config Program init/init Program test/printf/test-printf Program core/core COMPILE version.o LINK core make[1]: Verlasse Verzeichnis '/home/wolfgang/genrep/build.cc' genode build completed using NOVA kernel at /home/wolfgang/genrep/build.cc/kernel/hypervisor creating ISO image... Warning: -follow-links does not always work correctly; be careful. Size of boot image is 4 sectors -> No emulation Total translation table size: 2048 Total rockridge attributes bytes: 2066 Total directory bytes: 8192 Path table size(bytes): 64 Max brk space used 1b000 1508 extents written (2 MB) spawn amttool 10.1.1.2 reset host x201me., reset [y/N] ? y execute: reset result: pt_status: successspawn amtterm -u admin -p Test4ls! -v 10.1.1.2 amtterm: NONE -> CONNECT (connection to host) ipv4 10.1.1.2 [10.1.1.2] 16994 open amtterm: CONNECT -> INIT (redirection initialization) amtterm: INIT -> AUTH (session authentication) amtterm: AUTH -> INIT_SOL (serial-over-lan initialization) amtterm: INIT_SOL -> RUN_SOL (serial-over-lan active) serial-over-lan redirection ok connected now, use ^] to escape amtterm: RUN_SOL -> ERROR (failure) amtterm: ERROR: redir_data: unknown r->buf 0x29 spawn amtterm -u admin -p Test4ls! -v 10.1.1.2 amtterm: NONE -> CONNECT (connection to host) ipv4 10.1.1.2 [10.1.1.2] 16994 open amtterm: CONNECT -> INIT (redirection initialization) amtterm: INIT -> AUTH (session authentication) amtterm: AUTH -> INIT_SOL (serial-over-lan initialization) amtterm: INIT_SOL -> RUN_SOL (serial-over-lan active) serial-over-lan redirection ok connected now, use ^] to escape xð~xð~Error: Test execution timed out make: *** [run/printf] Fehler 254