Hi,
On 03.08.2017 13:29, Johannes Kliemann wrote:
I have a touchscreen controller (which is an I2C slave) that I need to enable via APCI. This should be done by calling the _PS0 ACPI method. I call this method by using AcpiEvaluateObject with no arguments and no return values.
just guessing. Since the touchscreen controller is a slave of the I2C controller, you have to have a (ACPI) driver to enable the I2C and potentially also the right I2C slaves.
what am I missing to successfully enable the touchscreen device via ACPI? Is there something the Linux kernel is initializing implicitly (I couldn't find something like this)?
The current workaround for this issue is to use the GPIO pins to enable the controller. But this isn't the desired way since it requires an additional GPIO driver that takes ~100 LOC and also a separate ACPI initialization for this driver.
again, just guessing. Your workaround sounds bit like a part of the initialize sequence of the I2C controller.
Besides that other functions that are needed to get initial parameters return errors. On the specific device I have the following examples:
_SB_.I2C4.SSCN _SB_.I2C4.FMCN _SB_.I2C4.FPCN _SB_.I2C4.HSCN
again, just guessing. Probably you need/have to find the right acpi method to initialize the I2C controller, so that the slaves, as your touchscreen, may work properly.
what am I missing to successfully enable the touchscreen device via
ACPI? Is there something the Linux kernel is initializing implicitly (I couldn't find something like this)?
... just guessing: the Linux kernel initialize the I2C controller for sure fully, thats why the I2C method in the ACPI tables of your I2C slave work in Linux ?
If all my guessing above is wrong, another direction could be to check the version of the acpica library used by Genode and the ACPICA version you have in the Linux kernel. I know that ACPICA library code and Linux code does not exactly match (but they have common roots), so that one may possibly deduce the difference in the behavior. Maybe a update to a new ACPICA library version for Genode can help (since there a features and fixes in the upstream ACPICA library according to the changelog) ?
Good luck,