Hello Christian, Thanks for your reply, by the way, I would like to have a desktop computer where I can run Sculpt without any error, which computer you suggest for that? I am not a big expert of PCI ports.
Regards, Edoardo Mantovani
Il giorno mar 23 feb 2021 alle ore 06:39 Christian Helmuth christian.helmuth@genode-labs.com ha scritto:
Hello Edoardo,
your SATA PCI devices seem to use a programming interface that's not AHCI compatible.
<device bdf="0:1f.2" vendor_id="0x8086" device_id="0x3b2e" class_code="0x1018a" bridge="no" cap="0x1" cap="0x13"/> <device bdf="0:1f.5" vendor_id="0x8086" device_id="0x3b2d" class_code="0x10185" bridge="no" cap="0x1" cap="0x13"/>
For AHCI compatibility the class code has to be 0x0106xx. Your devices use 0101xx which is "IDE interface" [1] [2] [3] and Genode does not support this.
[1] https://pci-ids.ucw.cz/read/PD/01/01 [2] https://pci-ids.ucw.cz/read/PD/01/01/8a [3] https://pci-ids.ucw.cz/read/PD/01/01/85
Regards
Christian Helmuth Genode Labs
https://www.genode-labs.com/ · https://genode.org/ https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users