Hallo all together, I am working on a scenario that includes the Genode's VMM hosting a Linux VM. For the first test: a) I build a Linux VM after the instructions from https://genodians.org/ssumpf/2020-02-24-linux-vm . (https://genodians.org/ssumpf/2020-02-24-linux-vm) b) The Linux Image, initrd and the dtb binary are in (genode-dir)/build/arm_v8a/bin copied. c) Build the run/vmm_arm for KERNEL=hw BOARD=imx8q_evk d)Booted the uImage from var/run/vmm_arm The result is as following: ## Booting kernel from Legacy Image at 50000000 ... Image Name: Image Type: AArch64 Linux Kernel Image (gzip compressed) Data Size: 12335823 Bytes = 11.8 MiB Load Address: 40010000 Entry Point: 40010000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK
Starting kernel ... kernel initialized ROM modules: ROM: [000000004025d000,000000004025e742) LICENSE.bitstream-vera ROM: [00000000404fb000,000000004050b9b7) README ROM: [0000000041153000,0000000041153006) VERSION ROM: [00000000401bf000,00000000401cf18c) Vera.ttf ROM: [00000000404b0000,00000000404bc048) VeraMono.ttf ROM: [0000000040d56000,0000000040d6bfb8) backdrop ROM: [0000000041a96000,0000000041b56800) bash-minimal.tar ROM: [0000000040d3c000,0000000040d3c05c) block_devices.report ROM: [0000000040d88000,0000000040e18360) bootstrap-hw-imx8q_evk.o ROM: [0000000041a08000,0000000041a24758) cached_fs_rom ROM: [0000000040d3d000,0000000040d558b8) chroot ROM: [0000000041d22000,0000000041d3a058) clipboard ............... 3038 MiB RAM and 64533 caps assigned to init [init] Warning: runtime assigned RAM (32G) exceeds available RAM (2845327784) [init] Error: RAM preservation exceeds available memory [init -> log_kernel] Error: ROM-session creation failed (ram_quota=6144, cap_quota=3, label="log") [init -> log_kernel] Error: Could not open ROM session for "log" [init -> log_kernel] Error: Uncaught exception of type 'Genode::Rom_connection::Rom_connection_failed' [init -> log_kernel] Warning: abort called - thread: ep [init -> config_fs] tar archive 'launcher.tar' local at 0x121000, size is 12288 .... [init -> report_fs] Warning: ram donation is 182700 but used RAM is 184320B, 'ro' [init -> report_fs] Warning: cap donation is 11 but used caps is 12, 'ro' [init -> report_fs_rom] /drivers/usb_active_config ROM file is missing [init -> report_fs_rom] /drivers/usb_active_config ROM file is missing [init -> report_fs_rom] /drivers/usb_active_config ROM file is missing [init -> report_fs_rom] /drivers/usb_active_config ROM file is missing I presume something went wrong during the initialization process. Where does the value of the assigned RAM comes from? Is the exceeded value of requested RAM that causes the scenario to fail? Best regards, Christo