Hey Guys,
I'm really happy opening my first discussion. :D I take part on a research by using Genode on Odroid_xu4. Had some problems creating images but I got one for XU3, created as "uimage" put on SD-Card. Now I have several information:
https://github.com/genodelabs/genode/issues/991, not understand,yet. https://sourceforge.net/p/genode/mailman/message/31693682/, think the next steps.
And https://en.wikipedia.org/wiki/ODROID in which Genode is declared as "NO" in working as OS with XU4. In Wikipedia-Talk I questioned it. I hope, somebody can give a clear answer for that. Also I believe, Yevgeny made good work, but more I want to know, why he interrupted the project.
Well, after connecting this is my first Issue :D, This is the first statement from XU4 via "gtkterm" connected UART:
U-Boot 2012.07-00036-g4d29c46-dirty (Dec 04 2015 - 15:52:26) for Exynos5422 CPU: Exynos5422 Rev0.1 [Samsung SOC on SMP Platform Base on ARM CortexA7] APLL = 800MHz, KPLL = 800MHz MPLL = 532MHz, BPLL = 825MHz Board: HardKernel ODROID DRAM: 2 GiB WARNING: Caches not enabled TrustZone Enabled BSP BL1 version: �/�� VDD_KFC: 0x44 LDO19: 0xf2 Checking Boot Mode ... SDMMC MMC: S5P_MSHC2: 0, S5P_MSHC0: 1 MMC Device 0: 14.8 GiB MMC Device 1: 29.1 GiB MMC Device 2: MMC Device 2 not found there are pending interrupts 0x00000001 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 Unable to use mmc 0:1 for fatload Unknown command 'ext4load' - try 'help' Unknown command 'ext4load' - try 'help' Load Boot Script from mmc 0:1 <<< Unable to use mmc 0:1 for fatload Load Boot Script from mmc 0:2 <<< Unable to use mmc 0:2 for fatload Run Default Bootcmd <<< reading kernel..device 0 Start 1263, Count 16384 MMC read: dev # 0, block # 1263, count 16384 ... 16384 blocks read: OK completed reading RFS..device 0 Start 17647, Count 2048 MMC read: dev # 0, block # 17647, count 2048 ... 2048 blocks read: OK completed Bad Linux ARM zImage magic!
Sorry for missing information for better understanding the Issue. May I can complete them next time. Thanks for any help!
Steve