Hi Reiner,
I have some hints to your questions/issues.
On Fri, Jun 14, 2019 at 10:42:50 CEST, cand.med.mag.r.danner wrote:
-1- on a T400 lenovo after booting in genode a black screen which run in a reboot loop / after three runs i shut down the system
The T400 is a pre-Core-i platform using Intel Core 2 Duo CPUs and therefore is out of the range of well-tested devices. You could neverthelesse try to check the following BIOS settings and retry Sculpt CE.
Security -> Memory Protection -> Execution Prevention -> Enabled
If this feature is disabled the system intialization enters a reboot loop.
Config -> CPU -> Virtualization Technology -> Enabled Config -> CPU -> VT-d Feature -> Enabled
Unfortunately, I was also not lucky with a quick test on a dusty T400 from our recycling stack. So, I suggest you spare the time.
-2- on a X201 lenovo after booting in genode a colored screen apears with vertical strips / the i shut down the system
It's a pity that this does not work out-of-the-box as the X201 is a particularly suitable platform to start with: limited variations of models, support for virtualization and IOMMU. Could please check the following BIOS Options?
Config -> CPU -> Virtualization Technology -> Enabled Config -> CPU -> VT-d Feature -> Enabled Security -> Memory Protection -> Execution Prevention -> Enabled
With a X201 from our stock the Sculpt CE image works like a charm just a second ago.
Greets