2014-01-28 Sebastian Sumpf <Sebastian.Sumpf@...1...>
On 01/28/2014 01:20 PM, Christian Helmuth wrote:
Sebastian,
On Tue, Jan 28, 2014 at 01:07:19PM +0100, Sebastian Sumpf wrote:
Thanks for your tests! But I don't like the 65 MBit/s thing! What is going on? Is this RX or TX?
Complete netperf output follows
---------------------------- TCP_STREAM ----------------------- spawn netperf-2.6.0 -H 10.0.0.65 -P 1 -v 2 -t TCP_STREAM -c -C -- -m 1024 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
10.0.0.65 () port 0 AF_INET
Recv Send Send Utilization Service
Demand
Socket Socket Message Elapsed Send Recv Send
Recv
Size Size Size Time Throughput local remote local
remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB
us/KB
87380 16384 1024 10.02 65.59 34.95 -1.00 174.598
-1.249
Alignment Offset Bytes Bytes Sends Bytes Recvs Local Remote Local Remote Xfered Per Per Send Recv Send Recv Send (avg) Recv (avg) 8 8 0 0 82158592 1024.00 80233 8905.12 9226
Maximum Segment Size (bytes) 1448
calculation: overall bytes / size per packet / time = packets per second 82158592 Bytes / 1024 Bytes / 10.02 s = 8007 packets/s
! PERF: TCP_STREAM 65.59 MBit/s ok
---------------------------- TCP_MAERTS ----------------------- spawn netperf-2.6.0 -H 10.0.0.65 -P 1 -v 2 -t TCP_MAERTS -c -C -- -m 1024 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
10.0.0.65 () port 0 AF_INET
Recv Send Send Utilization Service
Demand
Socket Socket Message Elapsed Recv Send Recv
Send
Size Size Size Time Throughput local remote local
remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB
us/KB
87380 16384 1024 10.00 543.35 39.06 -1.00 23.555
-0.151
Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 679280808 13875.90 48954 16384.00
41474
Maximum Segment Size (bytes) 1448
calculation: overall bytes / size per packet / time = packets per second 679280808 Bytes / 1024 Bytes / 10.00 s = 66336 packets/s
! PERF: TCP_MAERTS 543.35 MBit/s ok
The manual states
TCP_STREAM It is quite simple, transferring some quantity of data from the system running netperf to the system running netserver. TCP_MAERTS A TCP_MAERTS (MAERTS is STREAM backwards) test is "just like" a TCP_STREAM test except the data flows from the netserver to the netperf.
So, the scenario is much slower if the Genode side is _receiving_.
Without cursing: This is no good! I will look into that!
Sebastian
-- Sebastian Sumpf Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds.
http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.cl... _______________________________________________ Genode-main mailing list Genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
Thank you very much for the reply! I will try to use Genode on Nova to perform these tests.