Hi Hamed,
I updated the Falkon run scripts on this git branch:
https://github.com/cproc/genode-world/tree/qtwebengine-20240517
Loading web pages on NOVA in QEMU works for me now. I'm using the current Genode staging branch.
For base-linux you need to configure NAT or add tap0 to a bridge.
I'm using these commands for the tap0 and NAT configuration:
sudo tunctl -b -u christian sudo ifconfig tap0 10.0.2.1 up sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo /sbin/iptables -t nat -A POSTROUTING -o enp0s3 -j MASQUERADE sudo /sbin/iptables -A FORWARD -i enp0s3 -o tap0 -m state --state RELATED,ESTABLISHED -j ACCEPT sudo /sbin/iptables -A FORWARD -i tap0 -o enp0s3 -j ACCEPT
Christian
On 17.05.24 11:00, hamed_khandagh--- via users wrote:
Hello Christian,
The build of Falkon with the Nova kernel on a PC board has been completed.
I apologize for any confusion caused by my previous email, which was sent in haste because I have recently started working with the Genode framework and need to become more fully acquainted with its build system.
By adding certain components to the source code, I have been able to run Falkon for the Nova kernel on a PC board. The e1000 network is also correctly recognized and receives the network address via DHCP correctly. However, I still do not have network access from within QEMU to the outside and vice versa.
Thank you for your understanding.
Best regards, Hamed _______________________________________________ users mailing list -- users@lists.genode.org To unsubscribe send an email to users-leave@lists.genode.org Archived at https://lists.genode.org/mailman3/hyperkitty/list/users@lists.genode.org/mes...