In message eea25bd3d2bf298bc209542d39a383f5@sojus-software.de fixed-term.christo.bita@sojus-software.de wrote:
Hello Christian, I was probably expressed wrong. Want I meant is, the board it does not boot. I know the board is functional because I firstly tried to boot the Android image from the eMMC and it worked. So I am definitely doing something very
wrong or missing some step in between while preparing the SD card with the SculptOS image.
The .elf file isn't a image of a sdcard. It is a "program" that needs to be started from a bootloader. You need u-boot on the sdcard. Follow Stefans reply. You also need access to the uart (serial port), like Christian hinted of.
No hint or help is trivial as I am quite a beginner. Thanks in advance!
No problem!
Best regards Michael Grunditz