2 Apr
2018
2 Apr
'18
9:33 p.m.
This is interesting. I get the same error message in a VirtualBox VM using the "ICH9" chipset. (It doesn't happen with the "PIIX3" chipset, but the block device isn't found using that.)
How did you disable "usb_drv"? (I tried a few things, but they all hung the system.)
On 03/31/2018 02:44 PM, Nobody III wrote:
No. I can use platform_drv just fine without usb_drv, and even with fb_drv.
On Sat, Mar 31, 2018, 10:32 AM Chris Rothrock <cgrothrock@...9... mailto:cgrothrock@...9...> wrote:
if you don't load the usb_drv, does the platform_drv still run out of caps? On Sat, Mar 31, 2018 at 2:46 AM, Nobody III <hungryninja101@...9... <mailto:hungryninja101@...9...>> wrote: I've been testing Genode's current compatibility with my desktop computer, which has an AMD 9xx chipset. While the framebuffer driver works fine, usb_drv does not. Here's the full output: Genode 18.02-2-g6888094f6 <local changes> 16299 MiB RAM and 63253 caps assigned to init [init -> acpi_drv] Found MADT [init -> acpi_drv] MADT IRQ 0 -> GSI 2 flags: 0 [init -> acpi_drv] MADT IRQ 9 -> GSI 9 flags: 15 [init -> acpi_drv] Found MCFG [init -> acpi_drv] MCFG BASE 0xe0000000 seg 0x0 bus 0x0-0xff [init -> platform_drv] 0:2.0 - bridge 1:0.0 [init -> platform_drv] 0:9.0 - bridge 2:0.0 [init -> platform_drv] 0:14.4 - bridge 3:0.0 [init -> platform_drv] 0:15.0 - bridge 4:0.0 [init -> platform_drv] 0:15.3 - bridge 5:0.0 [init -> usb_drv] Could not read screen resolution in config node [init -> usb_drv] Configured HID screen with 0x0 (multitouch=false) [init -> usb_drv] No <storage> config node found - not starting the USB Storage (Block) service [init -> usb_drv] No <nic> config node found - not starting the USB Nic (Network) service [init -> usb_drv] No <raw> config node found - not starting external USB service [init -> usb_drv] Enabled UHCI (USB 1.0/1.1) support [init -> usb_drv] Enabled OHCI (USB 1.0/1.1) support [init -> usb_drv] Enabled EHCI (USB 2.0) support [init -> usb_drv] Enabled XHCI (USB 3.0) support *[init -> platform_drv] Warning: Out_of_caps during Device_component construction* *[init -> platform_drv] Warning: Out_of_caps during Device_component construction* *[ 0] sys_assign_pci: Invalid Hint (0x200)* [init -> platform_drv] Error: usb_drv -> : assignment of PCI device 2:0.0 failed phys=0xe0200000 virt=0x80400000 [init -> usb_drv] ioremap: mapped phys 0xfe100000 (size 32768) to virt 0x20000 [init -> usb_drv] dev_info: xHCI Host Controller [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 1 [init -> usb_drv] dev_info: hcc params 0x040040a5 hci version 0x100 quirks 0x00000010 [init -> platform_drv] 2:0.0 adjust IRQ as reported by ACPI: 10 -> 48 [init -> platform_drv] 2:0.0 uses MSI 64bit, vector 0x9f, address 0xfee10000, maskable [init -> usb_drv] dev_info: USB hub found [init -> usb_drv] dev_info: 4 ports detected [init -> usb_drv] dev_info: xHCI Host Controller [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 2 [init -> usb_drv] dev_info: We don't know the algorithms for LPM for this host, disabling LPM. [init -> usb_drv] dev_info: USB hub found [init -> usb_drv] dev_info: 4 ports detected [ 0] sys_assign_pci: Invalid Hint (0xb2) [init -> platform_drv] Error: usb_drv -> : assignment of PCI device 0:16.2 failed phys=0xe00b2000 virt=0x1000 [init -> usb_drv] ioremap: mapped phys 0xfe204000 (size 256) to virt 0x17000 [init -> usb_drv] dev_info: EHCI Host Controller [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 3 [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [init -> platform_drv] 0:16.2 adjust IRQ as reported by ACPI: 11 -> 17 [init -> platform_drv] 0:16.2 uses IRQ, vector 0x11, non-maskable [init -> usb_drv] dev_info: irq 130, io mem 0xfe204000 [init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00 [init -> usb_drv] dev_info: USB hub found [init -> usb_drv] dev_info: 4 ports detected [ 0] sys_assign_pci: Invalid Hint (0x9a) [init -> platform_drv] Error: usb_drv -> : assignment of PCI device 0:13.2 failed phys=0xe009a000 virt=0x1000 [init -> usb_drv] ioremap: mapped phys 0xfe207000 (size 256) to virt 0x28000 [init -> usb_drv] dev_info: EHCI Host Controller [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 4 [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [init -> platform_drv] 0:13.2 adjust IRQ as reported by ACPI: 11 -> 17 [init -> platform_drv] 0:13.2 uses IRQ, vector 0x11, non-maskable [init -> usb_drv] dev_info: irq 131, io mem 0xfe207000 [init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00 [init -> usb_drv] dev_info: USB hub found [init -> usb_drv] dev_info: 5 ports detected [ 0] sys_assign_pci: Invalid Hint (0x92) [init -> platform_drv] Error: usb_drv -> : assignment of PCI device 0:12.2 failed phys=0xe0092000 virt=0x1000 [init -> usb_drv] ioremap: mapped phys 0xfe209000 (size 256) to virt 0x29000 [init -> usb_drv] dev_info: EHCI Host Controller [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 5 [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [init -> platform_drv] 0:12.2 adjust IRQ as reported by ACPI: 11 -> 17 [init -> platform_drv] 0:12.2 uses IRQ, vector 0x11, non-maskable [init -> usb_drv] dev_info: irq 132, io mem 0xfe209000 Also, I get the following message in dmesg on linux (from drivers/usb/host/pci-quirks.c), but not from usb_drv: QUIRK: Enable AMD PLL fix What might be going on? Why would usb_drv cause platform_drv to run out of CAPs, even when I assign it 2000 CAPs (instead of 800)? ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net <mailto:genode-main@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/genode-main -- Thank You, Chris Rothrock Senior System Administrator (315) 308-1637 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net <mailto:genode-main@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/genode-main
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main