Hi genodians, I tried to proceed with Sebastian's suggestions. When I fetched dde_rump from [ https://github.com/justincormack/netbsd-src ] while preparing port for riscv, I received an error message as patch could not be applied. Here is the error message:
dde_rump download https://github.com/justincormack/netbsd-src dde_rump git Cloning into 'src/lib/dde_rump'... Updating files: 100% (31930/31930), done./31930) dde_rump update src/lib/dde_rump dde_rump download https://github.com/justincormack/netbsd-src/trunk/src/sys/arch dde_rump download https://github.com/justincormack/netbsd-src/trunk/src/common/lib/libc/arch/r... dde_rump apply patches/rump.patch 1 out of 1 hunk FAILED -- saving rejects to file src/lib/dde_rump/src/sys/sys/module.h.rej make[2]: *** [/genode/tool/ports/mk/install.mk:128: phony/patches/patches/rump.patch] Error 1 make[1]: *** [/genode/tool/ports/mk/prepare_single_port.mk:43: _install_in_port_dir] Error 2 make: *** [tool/ports/prepare_port:47: dde_rump] Error 2
I didn't know, if am supposed to modify the patch file or the file (module.h). So I decided to move on with the previous repo ( https://github.com/ssumpf/rump.git) and I manually added the missing header files in [ /genode/contrib/dde_rump-<hash>/src/lib/dde_rump/src/sys/sys ] that were required to build sculpt for virt riscv. The fatal error problem was gone but now while building sculpt I am getting the following error.
COMPILE vnode_if.o COMPILE xlat_mbr_fstype.o make[7]: *** No rule to make target 'atomic_add_16.S', needed by 'atomic_add_16.o'. Stop. make[6]: *** [var/libdeps:184: rump.lib] Error 2 make[5]: *** [Makefile:336: gen_deps_and_build_targets] Error 2 make[4]: *** [/genode/tool/depot/mk/build_bin_archive:208: /genode/depot/genodelabs/bin/riscv/rump/2023-03-28-b.build/bin] Error 1 make[3]: *** [/genode/depot/var/build.mk:264: genodelabs/bin/riscv/rump/2023-03-28-b] Error 2 make[2]: *** [/genode/tool/depot/build:136: execute_generated_build_mk_file] Error 2 make[1]: *** [/genode/tool/depot/create:59: build] Error 2 make[1]: Leaving directory '/genode/build/riscv' child process exited abnormally
I have found out that, there is no 'atomic_add_16.S' in ( https://github.com/justincormack/netbsd-src/trunk/src/common/lib/libc/arch/r... ) but its there for aarch64 which is not working for me as I am working on riscv.
These were the two problems I have faced, please give some comments on it and kindly suggest something through which I can proceed further.
thanks & regards Pranab
On Fri, Mar 17, 2023 at 1:22 PM Sebastian Sumpf < Sebastian.Sumpf@genode-labs.com> wrote:
On 3/15/23 15:23, Pranab Kumar Rout cs21m045 wrote:
Hi all, As I see in [1], when we prepare port for dde_rump, it fetches from [2]
and not
from [3]. And I found that the "src/sys/sys/common_ansi.h" is not
present in
[2]. May be for this reason while building sculpt the error came up.
Also in [1]
I can see that its fetching libc files from "/src/common/lib/libc/arch/aarch64/atomic" and not from "/src/common/lib/libc/arch/riscv/atomic". Is it okay or should I update
this in
[1] ?
Yes.
Cheers,
Sebastian
[1] repos/dde_rump/ports/dde_rump.port <
https://github.com/genodelabs/genode/blob/master/repos/dde_rump/ports/dde_ru...
https://github.com/ssumpf/rump.git%3E
[3] https://github.com/justincormack/netbsd-src https://github.com/justincormack/netbsd-src
Were you suggesting to update this thing ? Please have a look and
suggest steps
I need to take. I think this must be the reason for that fatal error. Kindly acknowledge.
Regards, Pranab
On Mon, Mar 13, 2023 at 4:07 PM Sebastian Sumpf <
Sebastian.Sumpf@genode-labs.com
mailto:Sebastian.Sumpf@genode-labs.com> wrote:
Hello Pranab, On 3/13/23 07:47, Pranab Kumar Rout cs21m045 wrote: > Hello genodians, > While building sculpt for virt_qemu_riscv, I found that dde_rumpport is not
> prepared for RISCV. Taking help from the community, I used thesame
approach as > for arm_v8a (aarch64) as found under "repos/dde_rump/lib/mk/spec/arm_64/*" just > for "spec/riscv" in order to enable rump support for RISC-V. > I am getting this error. If you find it familiar, kindly help me > checking library dependencies... > Library ldso_so_support > COMPILE so_support.o > MERGE ldso_so_support.lib.a > Library ld > CONVERT ld.symbols.s > ASSEMBLE ld.symbols.o > MERGE ld.abi.so <http://ld.abi.so> <http://ld.abi.so <> Library base > MERGE base.lib.a > Library block_session > MERGE block_session.lib.a > Library config > MERGE config.lib.a > Library file_system > MERGE file_system.lib.a > Library file_system_session > MERGE file_system_session.lib.a > Library os > MERGE os.lib.a > Library rump_include > MERGE rump_include.lib.a > Library rump > COMPILE __main.o > In file included from >/genode/depot/genodelabs/src/rump/2023-03-07-b/src/lib/dde_rump/src/sys/sys/types.h:47,
> from >/genode/depot/genodelabs/src/rump/2023-03-07-b/src/lib/dde_rump/src/sys/lib/libkern/__main.c:33:
>/genode/depot/genodelabs/bin/riscv/rump/2023-03-07-b.build/var/libcache/rump/include/machine/ansi.h:3:10: fatal error: sys/common_ansi.h: No such file or directory
> 3 | #include <sys/common_ansi.h> > | ^~~~~~~~~~~~~~~~~~~ When looking at"contrib/dde_rump-<hash>/src/lib/dde_rump_aarch64_backport" I
can see that only "src/sys/arch" [1] is checked out from [2] while "common_ansi.h" resides under "src/sys/sys/common_ansi.h" [3].Therefore, you
could adjust [1] to also checkout "src/sys" or "src/sys/sys" andupdate the
"INC_DIR" and/or symlinks under "dde_rump/lib/mk/spec/riscv"accordingly.
[1] repos/dde_rump/ports/dde_rump.port [2] https://github.com/justincormack/netbsd-src <https://github.com/justincormack/netbsd-src> [3]https://github.com/justincormack/netbsd-src/blob/master/src/sys/sys/common_a... < https://github.com/justincormack/netbsd-src/blob/master/src/sys/sys/common_a...
*Note: When adjusting "dde_rump.port" you need to execute ! ./tool/ports/update_hash dde_rump in order to create a new hash for the port. Regards, Sebastian -- Sebastian Sumpf Genode Labs http://www.genode-labs.com <http://www.genode-labs.com> ·<http://genode.org> Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth _______________________________________________ Genode users mailing list users@lists.genode.org <mailto:users@lists.genode.org> https://lists.genode.org/listinfo/users <https://lists.genode.org/listinfo/users>
Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users
-- Sebastian Sumpf Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users