Dear Genode community,
we are currently trying to get a Raspberry Pi 1 Model B running with Genode 16.08 and Fiasco.OC r67 from https://github.com/skalk/foc/.
We made changes to both, genode and foc but the basis are the two mentioned versions.
Trying to boot the RPi, we are left with the following message, the board resets itself? and again tries to boot:
... reading genode.img 2060288 bytes read in 331 ms (5.9 MiB/s) Kernel image @ 0x1000000 [ 0x1000000 - 0x11f7000 ]
Starting k L4 Bootstrapper Build: #5 Wed Jul 5 17:34:36 CEST 2017, 4.9.2 Scanning up to 512 MB RAM, starting at offset 32MB
U-Boot 2014.07-rc3-gd4614d4 (Jun 14 2014 - 01:23:23) ...
(Trying to boot vanilla genode 16.08 with vanilla foc r67 (from skalk) leads to the same behavior.)
We were successful in running our setup (foc r67 and genode 16.08 both with our changes) on a pandaboard (real hardware) and on pbxa9 (qemu). Additionally we are able to successfully boot the RPi using vanilla genode 16.08 with the provided foc version (r56), using our u-boot configuration.
Do we need to make additional changes to foc and/or genode to be able to boot the RPi using r67 of foc? Any hints or information are very welcomed!
Regards, Alexander