users

users@lists.genode.org

2357 discussions

compiling got me a sculpt.iso file, wanted a scult.img file
by Paul Dufresne 01 Dec '24

01 Dec '24

make -C build/x86_64 run/sculpt KERNEL=nova BOARD=pc got me: [paul@betakard genode]$ ls -lh build/x86_64/var/run total 614M drwxr-xr-x 1 paul paul 8 1 déc 11:19 sculpt -rw-r--r-- 1 paul paul 452M 1 déc 11:19 sculpt.boot_modules.o -rw-r--r-- 1 paul paul 20K 1 déc 11:19 sculpt.config -rw-r--r-- 1 paul paul 163M 1 déc 11:20 sculpt.iso [paul@betakard genode]$ was expecting a sculpt.img file... to put on my USB key. Tried to write the sculpt.iso file on my USB key but it did not boot. What am I missing?

2 2

ports/libc.port:40: *** Need to have 'rpcgen' installed
by Paul Dufresne 01 Dec '24

01 Dec '24

make run/sculpt asked me to prepare libc (among many) but: libarchive install include/libarchive /home/paul/genodemy/genode/repos/libports/ports/libc.port:40: *** Need to have 'rpcgen' installed.. Arrêt. make[1]: *** [/home/paul/genodemy/genode/tool/ports/mk/prepare_single_port.mk:43: _install_in_port_dir] Error 2 make: *** [/home/paul/genodemy/genode/tool/ports/prepare_port:47: libc] Error 2 After that, I cannot return there because: make run/sculpt: Error: Ports not prepared or outdated: dde_rump libc libgcrypt libnl libpng libssh linux linux-firmware ncurses nova openssl stb ttf-bitstream-vera vim wpa_supplicant x86emu xz zlib /home/paul/genodemy/genode/tool/ports/prepare_port dde_rump libc libgcrypt libnl libpng libssh linux linux-firmware ncurses nova openssl stb ttf-bitstream-vera vim wpa_supplicant x86emu xz zlib dde_rump update src/lib/dde_rump dde_rump apply patches/rump.patch dde_rump apply patches/aarch64.patch Reversed (or previously applied) patch detected! Assume -R? [n] Apply anyway? [n] 2 out of 2 hunks ignored -- saving rejects to file src/lib/dde_rump_backport/arm/arm32/kobj_machdep.c.rej make[2]: *** [/home/paul/genodemy/genode/tool/ports/mk/install.mk:128: phony/patches/patches/aarch64.patch] Error 1 make[1]: *** [/home/paul/genodemy/genode/tool/ports/mk/prepare_single_port.mk:43: _install_in_port_dir] Error 2 make: *** [/home/paul/genodemy/genode/tool/ports/prepare_port:47: dde_rump] Error 2 [paul@betakard x86_64]$ Is there a way to unprepare everything to begn to new, after fixing rpcgen not installed (don't know how, asking here)?

2 2

Announcement: Genode OS Framework version 24.11 released
by Norman Feske 22 Nov '24

22 Nov '24

Today, we proudly released version 24.11 of the Genode OS Framework. https://genode.org/news/genode-os-framework-release-24.11 This version delivers the long anticipated support for multi-monitor setups, which motivated an overhaul of the entire GUI stack, from the driver interfaces, over the GUI server(s), up to the application level. A second highlight is the added compatibility to platforms based on the i.MX8MP SoC, in particular the MNT Pocket Reform laptop. Those of you who kept an eye on our previous releases this year may have noticed the successive advances of our Goa SDK. The current release complements this work with a new book "Genode Applications" that puts Goa front and center for the development of applications for Genode and Sculpt OS in particular. The book can be downloaded for free at the https://genode.org website. The improvements of version 24.11 at a glance: - New book "Genode Applications" - Largely revised GUI architecture - Mirrored and panoramic multi-monitor setups - Tickless GUI server and display drivers - Atomic blitting and panning - Support for pointer grabbing - Device drivers and platforms - DDE Linux for i.MX SoCs updated to kernel 6.6 - Platform driver for i.MX 8M Plus - Sculpt OS enabled for the MNT Pocket Reform laptop - Reworked Wifi management - PC audio driver updated to OpenBSD 7.6 - AVX and hardware-based AES in virtual machines - Goa SDK targeting Sculpt OS 24.10 by default Enjoy the entire story as told by the release documentation: https://genode.org/documentation/release-notes/24.11 I wish you a pleasant exploration of Genode 24.11, Norman -- Dr.-Ing. Norman Feske Genode Labs https://www.genode-labs.com · https://genode.org Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

1 0

Sculpt 24.10 alpha testing
by Alexander Boettcher 29 Oct '24

29 Oct '24

Hello Sculpt users, we entered the testing phase for the upcoming Sculpt OS 24.10 release. Before the final release, we like to invite early adopters to give our alpha versions a try and report back experiences (or issues) with their use cases via mail or via the Sculpt 24.10 github issue [0]. The alpha images can be downloaded from the following URLs. https://depot.genode.org/24_10_testing/image The current alpha version is solely for PC at moment: https://depot.genode.org/24_10_testing/image/sculpt-pc-2024-10-15.img.xz https://depot.genode.org/24_10_testing/image/sculpt-pc-2024-10-15.zip Following users already published a valid 24.10 index and additional packages: genodelabs, cproc & alex-ab If you are unfamiliar with the handling of the provided alpha image, please follow the general instructions of [1] for installing the image on a USB stick. Additionally, during the alpha phase, test versions can be retrieved via the "System -> Update" dialog in entry https://depot.genode.org/24_10_testing of the Sculpt installation. [0] https://github.com/genodelabs/genode/issues/5356 [1] https://genode.org/download/sculpt (24.04 version) Happy Sculpting, Alex -- Alexander Boettcher Genode Labs https://www.genodians.org - https://www.genode.org

3 6

missing content on index for my latest genodians.org post
by Pirmin Duss 27 Sep '24

27 Sep '24

Hello Genodians I pushed a new article to my genodian repository (github.com/trimpim/genodian. On the index page no content is displayed. This didn't occur to me while writing, as I always directly looked at the page I edited. I already tried to figure out, what is wrong, so I could push a fixup. I compared the new article to the old one and the title and the first paragraph are formatted about the same. Could anyone give me a hint what could be wrong with my article? Best regards, Pirmin

4 3

Sculpt OS talk on Sept 21st at Datenspuren 2024 in Dresden
by Benjamin Lamowski 19 Sep '24

19 Sep '24

Hi everyone, I am pleased to announce that we will present Sculpt OS at Datenspuren 2024, the annual conference of the local Computer Chaos Club chapter C3D2 on September 21st at 12pm at Zentralwerk Dresden: https://talks.datenspuren.de/ds24/talk/XBNY7R/ It is the 20 year anniversary of the conference and there will be a large variety of interesting presentations, if you're attending make sure to say hi! Best wishes, Ben -- Benjamin Lamowski Genode Labs https://www.genode-labs.com · https://genode.org Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

3 3

Recall: Mounting a Storage to Genode (for base-linux, x86)
by Rumen Mitov 30 Aug '24

30 Aug '24

Rumen.Mitov(a)constructor.tech would like to recall the message, "Mounting a Storage to Genode (for base-linux, x86)".

1 0

Mounting a Storage to Genode (for base-linux, x86)
by Rumen Mitov 30 Aug '24

30 Aug '24

Hello, I would need persistent storage for the Genode project I am working on. I tried to adapt the "repos/os/run/nvme.run" script but I could not get it to run on the base-linux platform. I need the linux platform as I am using lwext4 for the filesystem. As far as I understand, I need to use the lx_block component to manage the storage block inside the guest OS, but in order for this to be persistent I need to mount a backing store file from the host OS. In other words, I want to mount the file bin/ext4.raw as persistent storage mapped to /dev/hdd in the guest OS. I have attached my current iteration of my run script as well as the program files in case someone would like to try to run it. If anyone knows of any repos that have solved this, please let me know! Best, Rumen

1 0

Announcement: Genode OS Framework version 24.08 released
by Norman Feske 29 Aug '24

29 Aug '24

I'm happy to announce the release of Genode version 24.08 today. https://genode.org/news/genode-os-framework-release-24.08 This mid-summer release cycle was very much focused on consolidation work and the upgrade of 3rd-party software, in particular the upgrade of the Qt application framework to version 6 and the move of all Linux-based components and PC drivers to kernel version 6.6.47. The Goa SDK had been a prominent topic over the previous few releases and this one is no exception. Now, all puzzle pieces have fallen into place for seamless remote debugging by combining Goa with Sculpt OS. If this makes you curious, enjoy the detailed release documentation to learn more: https://genode.org/documentation/release-notes/24.08 The improvements of version 24.08 at a glance: - Qt6 application framework - Linux-based components updated to kernel version 6.6.47 - Mesa updated to version 24.0.8 - Enhanced board support for i.MX-based devices - Remote debugging using the Goa SDK - Meson build system support for the Goa SDK - API modernization of the base and GUI framework - Switch to Rust nightly tool chain - Initial x86 AVX support on NOVA Cheers Norman -- Dr.-Ing. Norman Feske Genode Labs https://www.genode-labs.com · https://genode.org Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

1 0

Change in RockChip repo
by Michael Grunditz 28 Aug '24

28 Aug '24

Hello! I have updated my genode-rockchip to include RK3399. Unfortunately none of the targets starts using Genode from git. They doesn't survive the jump from bootstrap/ctr0 to bootstrap/init. https://github.com/mickenx/genode-rockchip Michael

2 6

← Newer
1
...
5
6
7
8
9
10
11
...
236
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users