users

users@lists.genode.org

2357 discussions

Start a nNew thread

Re: Launchers and clipboard issue
by Dima Sokolov 01 Feb '21

01 Feb '21

Thank you Norman, Everything works now :) Best regards, Dima Sokolov

1 0

Re: Launchers and clipboard issue
by Dima Sokolov 01 Feb '21

01 Feb '21

Hello Norman, Here is my qt5-textedit launcher: <launcher pkg="genodelabs/pkg/qt5_textedit/2020-09-18"> <route> <service name="File_system"> <child name="ram_fs"/> </service> <service name="Gui"> <child name="themed_wm"/> </service> <service name="Report" label="shape"> <child name="themed_wm"/> </service> <service name="Report" label="clipboard"> <child name="themed_wm"/> </service> <service name="ROM" label_last="clipboard"> <parent/> </service> </route> <config clipboard="yes"> <vfs> <dir name="dev"> <log/> <inline name="rtc">2018-01-01 00:01</inline> </dir> <dir name="pipe"> <pipe/> </dir> <dir name="edit"> <fs label="rw"/> </dir> <tar name="qt5_dejavusans.tar"/> <tar name="qt5_libqgenode.tar"/> </vfs> <libc stdout="/dev/log" stderr="/dev/log" pipe="/pipe" rtc="/dev/rtc"/> </config> </launcher> Best regards, Dima Sokolov

2 1

Re: Launchers and clipboard issue
by Dima Sokolov 01 Feb '21

01 Feb '21

Thank you Norman, the launchers start apps normally once I copy the respective default config. But the pasting issue still persists. Here is my relevant /config/clipboard: <config verbose="yes" match_labels="yes"> <flow from="leitzentrale" to="desktop" /> <flow from="desktop" to="leitzentrale" /> <policy label_prefix="leitzentrale" domain="leitzentrale"/> <default-policy domain="desktop"/> </config> My clipboard config is based on the default one - I just changed the verbose setting to "yes". The log shows these messages the first time I try to paste: "This plugin does not support raise()" "This plugin does not support grabbing the keyboard" Every next time, I get this message: "Error: invalid clipboard XML syntax" If I set match_labels to "no", I don't get these messages and pasting works. What would be the proper clipboard config when match_labels is set to "yes"? Best regards, Dima Sokolov

2 1

ARM, VMM and the run example
by fixed-term.peter.jacobi＠sojus-software.de 29 Jan '21

29 Jan '21

Hi, after trying to understand a little bit deeper at the "arm_vmm.run" file in an effort to expand this to run 2 VMMs parallel, I faced some issues I do not understand well. So I hope to get here your expert help to clarify what I missundersand. 1.- Arm-Run-File: I modified the vmm_arm.run adding a 2nd component vm2 as you can see in the attached file. The result of this you can see in the attached result-file. So no entry point is found for this 2nd component. 2.- Source, wandering through the source structure /repos/os/src/ I found the "terminal_expect_send" in the test directory. What do i expect to find in the os-test-directory structure? Greetings, Peter

2 3

Launchers and clipboard issue
by Dima Sokolov 29 Jan '21

29 Jan '21

Hello, I'm experiencing an issue using Sculpt OS 20.08. Adding a config section to app launchers prevents certain apps from working: qt5-textedit, falkon, system shell. The component tree shows them as a new component, but no window is opened. The manual says that a <config> node within a launcher overrides the one provided by the package. It seems like overriding <config> here disables some important settings and prevents the apps from running properly. How to extend the default config or replace just a few parts instead of completely overriding it? For qt5-textedit with my custom config section, I get log messages like: "Warning: raise: raise not implemented" "child "text_editor" exited with exit value 1" If I try to do the same by using the "+" menu and adding <config> to a running component (e.g. qt5-textedit) in /config/managed/deploy and restarting the component, it doesn't prevent the app from running. However, adding <config> <clipboard="yes"/> </config> doesn't allow pasting in qt5-textedit and falkon. Neither does <config> <paste="yes"/> </config> in system shell. Pasting into qt5-textedit, falkon and system shell doesn't work with my config and the log shows this: "Error: Invalid clipboard XML syntax" On the other hand, copying works normally, and I can copy text from qt5-textedit, falkon and system shell into an Inspect window. Both copy and paste work inside an Inspect window. What would be the proper configuration for the launchers? Here are the relevant launchers: <launcher pkg="genodelabs/pkg/qt5_textedit/2020-09-18"> <config> <clipboard="yes"/> </config> <route> <service name="File_system"> <child name="ram_fs"/> </service> <service name="Gui"> <child name="themed_wm"/> </service> <service name="Report" label="shape"> <child name="themed_wm"/> </service> <service name="Report" label="clipboard"> <child name="themed_wm"/> </service> <service name="ROM" label_last="clipboard"> <parent/> </service> </route> </launcher> <launcher pkg="cproc/pkg/falkon/2020-10-30"> <route> <service name="File_system" label="config"> <child name="config"/> </service> <service name="File_system" label="downloads"> <child name="ahci-1.fs"/> </service> <service name="Gui"> <child name="themed_wm"/> </service> <service name="Nic"> <child name="nic_router"/> </service> <service name="Report" label="falkon -> shape"> <child name="themed_wm"/> </service> <service name="Report" label="clipboard"> <child name="themed_wm"/> </service> <service name="ROM" label_last="clipboard"> <parent/> </service> <service name="Rtc"> <parent/> </service> </route> <config> <clipboard="yes"/> </config> </launcher> <launcher pkg="genodelabs/pkg/system_shell/2020-09-18"> <route> <service name="Gui"> <child name="themed_wm"/> </service> <service name="File_system" label="config"> <child name="config"/> </service> <service name="File_system" label="report"> <parent label="report"/> </service> <service name="File_system" label="target"> <child name="ram_fs"/> </service> <service name="File_system" label="fonts"> <child name="fonts_fs"/> </service> <service name="ROM" label="vimrc"> <parent label="config -> vimrc"/> </service> <service name="ROM" label="clipboard"> <child name="themed_wm"/> </service> <service name="Report" label_last="clipboard"> <parent/> </service> <service name="RM"> <parent/> </service> </route> <config> <copy="yes"/> <paste="yes"/> </config> </launcher> Best regards, Dima Sokolov

2 1

Error Building "Sculpt-20.08"
by John J. Karcher 27 Jan '21

27 Jan '21

Hello Everyone, I hope this isn't too obvious, but I am trying to build "sculpt-20.08", and have run into a problem. I was able to work around the outdated external "curl" library, but I am stuck on a linker problem. After outputting: MERGE rump_tools.lib.a it generates a lot of messages along the lines of: /usr/bin/ld: /home/mainuser/Devel/genode_main/genode/depot/genodelabs/bin/x86_64/rump/2020-09-16.build/var/libcache/rump_tools/lex.yy.o:(.bss+0x240): multiple definition of `locators'; /home/mainuser/Devel/genode_main/genode/depot/genodelabs/bin/x86_64/rump/2020-09-16.build/var/libcache/rump_tools/files.o:(.bss+0x210): first defined here Then it ends with: collect2: error: ld returned 1 exit status make[6]: *** [/home/mainuser/Devel/genode_main/genode/depot/genodelabs/src/rump/2020-09-16/lib/mk/rump_tools.mk:88: /home/mainuser/Devel/genode_main/genode/depot/genodelabs/bin/x86_64/rump/2020-09-16.build/var/libcache/rump_tools/bin/nbconfig] Error 1 make[5]: *** [var/libdeps:75: rump_tools.lib] Error 2 make[4]: *** [Makefile:296: gen_deps_and_build_targets] Error 2 make[3]: *** [/home/mainuser/Devel/genode_main/genode/tool/depot/mk/build_bin_archive:200: /home/mainuser/Devel/genode_main/genode/depot/genodelabs/bin/x86_64/rump/2020-09-16.build/bin] Error 1 make[2]: *** [/home/mainuser/Devel/genode_main/genode/depot/var/build.mk:300: genodelabs/bin/x86_64/rump/2020-09-16] Error 2 make[1]: *** [/home/mainuser/Devel/genode_main/genode/tool/depot/build:134: execute_generated_build_mk_file] Error 2 make: *** [/home/mainuser/Devel/genode_main/genode/tool/depot/create:59: build] Error 2 I've seen better error messages than "Error 1" and "Error 2" in my day. :^) Are those "multiple definition of" messages errors or warnings? Does anyone else have any ideas on this? (I have the complete output, if it's helpful.) Thanks! -- John J. Karcher devuser(a)alternateapproach.com

2 2

Opening apps in dedicated workspaces
by GPT 27 Jan '21

27 Jan '21

Hi, I hope that it is not too late to ask your community to ensure that apps will open in the workspace from which they are called and not in the current workspace. To be more precise, after starting my computer I choose 5 apps to get opened. 2 in workspace 1, 2 in workspace 2 and 1 in workspace 3. Before the completion of their start I choose to be in workspace 4. None of the 5 apps should open in workspace 4! This feature would also be a general option, like: "Allow apps to start in current workspace: false/true". Thanks in advance.

2 1

Stealing focus matter
by GPT 23 Jan '21

23 Jan '21

Hi, I hope that it is not too late to ask your community to consider very seriously the matter of stealing focus that other OS/DEs suffer from. To be more precise, after starting my computer I choose 5 apps to get opened. While they are opening I choose the 2nd one (which opened) to work with. Now, the other 3 apps should complete start without coming forward and interrupt my work. They just appear in the task bar, either flashing, lighting or not. This feature would also be a general option, like: "Allow stealing focus: false/true". Thanks in advance. PS: "Always on Top" is not a SERIOUS solution at all!!! Discussing with some DE developers I was told that it is a matter of OS and not of DE. OS allows app windows to comes up.

2 1

Install Genode on desktop PC
by Edoardo Mantovani 23 Jan '21

23 Jan '21

Hi for everyone! I am new to Genode os, I've tried it for an once and I found it beautiful, but honestly I still don't know if (and how) I can install it on "my hardware's " pc. (I am currently using Sculpt 20-08) Please Helps, Regards, -- Edoardo Mantovani Independent security researcher email: Baseband(a)cpan.org Urbino, Italy

3 3

Sculpt 20.11 - Blank Screen On ThinkPad Convertible
by John J. Karcher 20 Jan '21

20 Jan '21

I don't know if anyone else is experiencing anything like this, but I am getting a blank screen after booting Sculpt 20.11 on my ThinkPad L380 Yoga. The mouse pointer does display (and move), so the system is alive, but Leitzentrale never appears. 20.08 worked fine. FWIW, I built a version from Master last week, but that has the same result. Is this a known issue? Is there anything I can reconfigure, etc.? Thanks! -- John J. Karcher devuser(a)alternateapproach.com

5 9

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users