users

users@lists.genode.org

2357 discussions

L4 bootstrap console output issue
by Daniel Waddington 20 Jun '13

20 Jun '13

Hi, I recently changed to using the Fiasco.OC source from Genode. I have just noticed problems with the bootstrap not outputting to the console on certain machines. The h/w is checked as ok, and if we replace bootstrap with r56 version from TU Dresden then everything is ok. Are there some Genode-specific changes to bootstrap on r46? P.S. I didn't notice the problem until I did a full rebuild so I'm not sure when the issue crept in. Daniel

2 1

regarding hello tutorial
by Amit Choudhari 17 Jun '13

17 Jun '13

if i try to run without timer it works fine but with timer included i get d followin error int main(): --- create local services --- int main(): --- start init --- int main(): transferred 17592186044415 MB to init int main(): --- init created, waiting for exit condition --- [init] Could not open file "ld.lib.so" Quota exceeded! amount=4096, size=4096, consumed=4096 [init] upgrading quota donation for SIGNAL session [init -> hello_server] Hello::Root_component::Root_component(Genode::Rpc_entrypoint*, Genode::Allocator*): Creating root component. [init -> hello_server] virtual Hello::Session_component* Hello::Root_component::_create_session(const char*): creating hello session. [init] hello_client: no route to service "Timer" [init -> hello_client] C++ runtime: Genode::Parent::Service_denied [init -> hello_client] void* abort(): abort called

1 0

Regarding hello tutorial
by Amit Choudhari 17 Jun '13

17 Jun '13

I tried to run d code including timer service its not working It says Hello_client no route to service "timer"

1 0

Re: need help with hello tutorial
by Archie Nidhi 13 Jun '13

13 Jun '13

It is working fine ,thank you very much On Thu, Jun 13, 2013 at 3:37 PM, Sebastian Sumpf < Sebastian.Sumpf@...1...> wrote: > [image: Boxbe] <https://www.boxbe.com/overview> This message is eligible > for Automatic Cleanup! (Sebastian.Sumpf@...1...) Add cleanup rule<https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftok…>| More > info<http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=14367538059…> > > Hi, > > On 06/13/2013 11:30 AM, Archie Nidhi wrote: > > There is a config folder with config in build when i moved that > > to build/bin then it still gives the same message > > You can try the following: > > 1. Add the hello_tutorial to your build/etc/build.conf: > > REPOSITORIES += $(GENODE_DIR)/hello_tutorial > > 2. Go to your build directory and enter: > > make run/hello > > This should start the hello example on Linux. > > 3. Copy the file 'config' from 'build/var/run/hello' to '/build/bin' > > 4. Go the '/build/bin' directory > > 5. Enter > ./core > > which should also start the example. Please inspect the 'config' file, > to see how the system is configured for the hello example. > > Regards, > > Sebastian > > -- > Sebastian Sumpf > Genode Labs > > http://www.genode-labs.com · http://genode.org > > Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden > Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth > > > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Genode-main mailing list > Genode-main(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/genode-main > >

1 0

Re: need help with hello tutorial
by Archie Nidhi 13 Jun '13

13 Jun '13

There is a config folder with config in build when i moved that to build/bin then it still gives the same message On Thu, Jun 13, 2013 at 2:51 PM, Sebastian Sumpf < Sebastian.Sumpf@...1...> wrote: > [image: Boxbe] <https://www.boxbe.com/overview> This message is eligible > for Automatic Cleanup! (Sebastian.Sumpf@...1...) Add cleanup rule<https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftok…>| More > info<http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=14367238444…> > > Hi Archie, > > On 06/13/2013 09:58 AM, Archie wrote: > > I am getting an error in running hello_tutorial > > > > There was no config in build/bin as specified in > > > http://genode.org/documentation/developer-resources/client_server_tutorial > > so i created a new directory config and moved the config in > > hello_tutorial/config to this new directory > > > > > > When I enter ./core in build/bin I get this error > > > > int main(): --- create local services --- > > int main(): --- start init --- > > int main(): transferred 17592186044415 MB to init > > int main(): --- init created, waiting for exit condition --- > > [init] Could not open file "ld.lib.so" > > Quota exceeded! amount=4096, size=4096, consumed=4096 > > [init] upgrading quota donation for SIGNAL session > > [init] Could not open file "config" > > [init] Could not obtain config file > > [init] C++ runtime: Genode::Config::Invalid > > [init] void* abort(): abort called > > > > > > Please tell me what is wrong > > You need to move the config file to 'build/bin'. > > Regards, > > Sebastian > > > -- > Sebastian Sumpf > Genode Labs > > http://www.genode-labs.com · http://genode.org > > Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden > Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth > > > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Genode-main mailing list > Genode-main(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/genode-main > >

2 1

need help with hello tutorial
by Archie 13 Jun '13

13 Jun '13

I am getting an error in running hello_tutorial There was no config in build/bin as specified in http://genode.org/documentation/developer-resources/client_server_tutorial so i created a new directory config and moved the config in hello_tutorial/config to this new directory When I enter ./core in build/bin I get this error int main(): --- create local services --- int main(): --- start init --- int main(): transferred 17592186044415 MB to init int main(): --- init created, waiting for exit condition --- [init] Could not open file "ld.lib.so" Quota exceeded! amount=4096, size=4096, consumed=4096 [init] upgrading quota donation for SIGNAL session [init] Could not open file "config" [init] Could not obtain config file [init] C++ runtime: Genode::Config::Invalid [init] void* abort(): abort called Please tell me what is wrong

2 1

Booting info in release notes.
by Daniel Waddington 12 Jun '13

12 Jun '13

I think there is a mistake in your release notes: http://genode.org/documentation/release-notes/13.05 root /tftpboot/nova config config-00-00-00-00-00-00 Should be... root /nova config config-00-00-00-00-00-00 Unless you have a weird setup with the tftpboot dir as root. Daniel

1 0

13.05 Release libports make prepare fails...
by Bob Stewart 11 Jun '13

11 Jun '13

Hi, looks like there is bz2 file missing from in python interpreter contrib.: The make ends with --- patching file contrib/python-2.6.4/Modules/posixmodule.c --2013-06-08 15:38:03-- http://qoost.hg.sourceforge.net/hgweb/qoost/qoost/archi ve/ce3d328928.tar.bz2 Resolving qoost.hg.sourceforge.net (qoost.hg.sourceforge.net)... 216.34.181.121 Connecting to qoost.hg.sourceforge.net (qoost.hg.sourceforge.net)|216.34.181.121 |:80... connected. HTTP request sent, awaiting response... 403 Archive type not allowed: bz2 2013-06-08 15:38:03 ERROR 403: Archive type not allowed: bz2. make: *** [download/ce3d328928.tar.bz2] Error 8 Thanks, Bob Stewart Sent with AquaMail for Android http://www.aqua-mail.com

2 1

Re: Porting in general
by Aditya Kousik 11 Jun '13

11 Jun '13

I came across this brilliant blogpost ( http://allsoftwaresucks.blogspot.in/2013/05/porting-genode-to-commercial-ha…). Stefan said, and I agree, that since Genode already supports OMAP4460, this was achievable. I also read this post: http://genode.org/documentation/articles/pandaboard I understand that porting is a very OS-and-device specific process. But it would be really helpful if there is any form of resource/documentation for porting an OS. Because, learning how to port an OS seems like a good skill to have in your arsenal. Thanks Aditya Kousik

1 0

Need Help
by Archie Nidhi 10 Jun '13

10 Jun '13

I am using a Linux Mint OS and am trying to run a simple genode demo using hte method shown in http://genode.org/documentation/developer-resources/getting_started I am getting an error saying /bin/bash: /home/anubhav/Downloads/genode-13.05/tool/run: /usr/bin/expect: bad interpreter: No such file or directory make: *** [run/demo] Error 126 Please tell me what is wrong

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users