users

users@lists.genode.org

2357 discussions

tool_chain for 64 bit
by Boris Mulder 23 May '17

23 May '17

I'm trying to compile the new toolchain using tool/tool_chain x86. However, it gives the following error: configuring bootstrap gcc... The following languages will be built: c,ada,c++,lto *** This configuration is not supported in the following subdirectories: target-libquadmath gotools target-libgfortran target-libgo target-libffi target-zlib target-libjava target-libobjc target-libgomp target-libcilkrts target-liboffloadmic target-libatomic target-libitm target-libsanitizer target-libmpx target-libssp target-boehm-gc (Any other directories should still work fine.) /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find crt1.o: No such file or directory /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find crti.o: No such file or directory /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.8/libgcc.a when searching for -lgcc /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find -lgcc /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.8/libgcc_s.so when searching for -lgcc_s /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find -lgcc_s /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find -lc /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.8/libgcc.a when searching for -lgcc /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find -lgcc /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.8/libgcc_s.so when searching for -lgcc_s /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find -lgcc_s /home/boris/projects/l2-17.05/build/bootstrap/install/bin/ld: cannot find crtn.o: No such file or directory collect2: error: ld returned 1 exit status configure: error: I suspect your system does not have 32-bit development libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib. I don't need the 32 bit stuff. However, I have no idea in which configure scripts this should be put. What do I need to do to build the toolchain for 64 bit? -- Met vriendelijke groet / kind regards, Boris Mulder Cyber Security Labs B.V. | Gooimeer 6-31 | 1411 DD Naarden | The Netherlands +31 35 631 3253 (office)

4 5

nic_drv crashes with resource request
by Boris Mulder 22 May '17

22 May '17

Hello, When I try to run my scenario under the latest master branch, the nic_drv stops working with the following message: [init] child "nic_drv" announces service "Nic" [init -> nic_drv] resource_request: ram_quota=1642496 [init -> nic_drv] used before freeing emergency=2478080 [init -> nic_drv] used after freeing emergency=2461696 [init] child "nic_drv" requests resources: ram_quota=1642496 I've tried giving it and its client (in this case vfs with lxip) more RAM, but to no avail. Currently the config looks like this: <start name="vfs"> <resource name="RAM" quantum="36M"/> <provides> <service name="File_system"/> </provides> <config ld_verbose="yes"> <vfs> <lxip ip_addr="$ip_addr" netmask="255.255.255.0" gateway="$gateway_ip_addr" nameserver="8.8.8.8"/> </vfs> <libc/> <default-policy writeable="yes" /> </config> <route> <service name="Nic"> <child name="nic_drv"/> </service> <any-service> <parent/> <any-child/> </any-service> </route> </start> <start name="nic_drv"> <resource name="RAM" quantum="4M"/> <provides> <service name="Nic"/></provides> <config verbose="yes"> <libc stdout="/dev/log" stderr="/dev/log"/> <vfs> <dir name="dev"> <log/> </dir> </vfs> </config> </start> What could I be doing wrong? -- Met vriendelijke groet / kind regards, Boris Mulder Cyber Security Labs B.V. | Gooimeer 6-31 | 1411 DD Naarden | The Netherlands +31 35 631 3253 (office)

2 1

Porting LibVMI
by Miguel Correia Guerra 18 May '17

18 May '17

Hi, I'm currently working with the TrustZone VMM example from Genode based on Genode 16.08 on i.MX53 QSB. So far I've been able to create a shared buffer which can be used for cross-world communication. My next step would be to try and port LibVMI[1] and attempt to run it in the Trustzone. Since I'm pretty new to this I would like to know which would be the best approach to start tackling this issue. Best regards, Miguel Guerra [1] - http://libvmi.com/

2 1

Reg: muen building errors
by S.SIVAREDDY 17 May '17

17 May '17

Hi christian.helmuth, I was building the muen for windows7 os as per this link(https://genode.org/documentation/release-notes/16.08#Experimental_vers…. But while running the following command to build the muen below errors came. /home/ubuntu/genode/build/muen $ make run/log then the kernle/build.log following errors came. make[5]: Nothing to be done for `download'. make[5]: Nothing to be done for `download'. make[5]: Nothing to be done for `download'. make[5]: Nothing to be done for `download'. make[5]: Nothing to be done for `download'. make -C contrib checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make sets $(MAKE)... yes checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking bfd.h usability... yes checking bfd.h presence... yes checking for bfd.h... yes checking dis-asm.h usability... yes checking dis-asm.h presence... yes checking for dis-asm.h... yes checking demangle.h usability... no checking demangle.h presence... no checking for demangle.h... no checking libiberty/demangle.h usability... yes checking libiberty/demangle.h presence... yes checking for libiberty/demangle.h... yes checking for bfd_openr in -lbfd... yes checking for dlopen in -ldl... yes checking for dcgettext in -lintl... no configure: creating ./config.status config.status: creating Makefile config.status: creating bfdada.gpr config.status: creating distrib/bfdada.gpr config.status: creating src/config.h make LIBRARY_TYPE=static build mkdir -p bin gcc -o bin/bfdgen -g -O2 -DHAVE_LIB_DL=1 -Isrc -g support/bfdgen.c bin/bfdgen > src/bfd-constants.ads gprbuild -XMODE=distrib -XPROCESSORS=4 -m -p -P"bfdada.gpr" -XMODE=distrib -XLIBRARY_TYPE=static -XPROCESSORS=4 object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/tmp/ada-bfd/obj/bfd/static" created library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/tmp/ada-bfd/lib/static" created for project bfdada gcc-4.6 -c -O2 bfd-disassembler-c.c gcc-4.6 -c -O2 bfdc.c gcc-4.6 -c -gnatn -g -O2 bfd-sections.adb gcc-4.6 -c -gnatn -g -O2 bfd-internal.ads gcc-4.6 -c -gnatn -g -O2 bfd.adb gcc-4.6 -c -gnatn -g -O2 bfd-symbols.adb gcc-4.6 -c -gnatn -g -O2 bfd-files.adb gcc-4.6 -c -gnatn -g -O2 bfd-constants.ads gcc-4.6 -c -gnatn -g -O2 bfd-thin-disassembler.ads gcc-4.6 -c -gnatn -g -O2 bfd-thin-sections.ads gcc-4.6 -c -gnatn -g -O2 bfd-thin.ads gcc-4.6 -c -gnatn -g -O2 bfd-thin-symbols.ads gcc-4.6 -c -gnatn -g -O2 bfd-disassembler.adb gprlib ada-bfd.lexch ar cr /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/tmp/ada-bfd/lib/static//libada-bfd.a /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/tmp/ada-bfd/obj/bfd/static/bfd-disassembler-c.o /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/tmp/ada-bfd/obj/bfd/static/bfdc.o ... ranlib libada-bfd.a make LIBRARY_TYPE=static install_lib mkdir -p /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/share/ada/adainclude/bfdada mkdir -p /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/share/ada/adainclude/ mkdir -p /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/lib/ada/adalib//bfdada cp -p src/*.ad[bs] /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/share/ada/adainclude/bfdada sed -e "s,INSTALL,/home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build,g" -e "s,LIBRARY_TYPE,static,g" < distrib/bfdada.gpr > /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/share/ada/adainclude/bfdada.gpr cp -p lib/static/*.ali /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/lib/ada/adalib//bfdada/ cp lib/static/libada-bfd.a /home/ubuntu/genode/build/muen/kernel/muen/contrib/ada-bfd/../build/lib/ object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/tmp/alog/obj/lib/static" created library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/tmp/alog/lib/static" created for project alog gcc-4.6 -c -W -Wall -Werror -O3 glue_syslog.c gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-active_logger.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-exceptions.ads gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-policy_db.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-maps.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-logger.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-controlled_map.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-transforms.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-transforms-casing.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-facilities.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-tasked_logger.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-log_request.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-facilities-syslog.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-helpers.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog.ads gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-facilities-file_descriptor.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-policy_db-types.adb gcc-4.6 -c -gnatygAdISuxo -gnatVa -gnat05 -gnatwal -gnatf -fstack-check -gnato -gnatwe alog-protected_containers.adb gprlib alog.lexch ar cr /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/tmp/alog/lib/static//libalog.a /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/tmp/alog/obj/lib/static/glue_syslog.o /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/tmp/alog/obj/lib/static/alog-active_logger.o ... ranlib libalog.a install -m 644 src/*.ad[bs] /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/../build/include/alog install -m 444 lib/static/*.ali /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/../build/lib/alog install -m 644 gnat/alog.gpr /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/../build/lib/gnat install -m 444 lib/static/libalog.a /home/ubuntu/genode/build/muen/kernel/muen/contrib/alog/../build/lib checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking whether ln -s works... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking POSIX termios... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether termios.h defines TIOCGWINSZ... no checking whether sys/ioctl.h defines TIOCGWINSZ... yes checking whether gnat can build shared libs... no (--disabled-shared) checking for python... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/param.h... yes checking for getpagesize... yes checking for working mmap... yes checking for pkg-config... /usr/bin/pkg-config checking for pygtk... no (incompatible gtk+ version) checking for pygobject... no (disabled by user) checking for PostgreSQL... no checking for sqlite... no checking for gmp... no checking for libiconv... no, disabled by user checking whether libgpr exists... no checking for readline... no, this is a pure GPL library (see --enable-gpl) checking whether platform supports atomic inc/dec... yes configure: creating ./config.status config.status: creating gnatcoll_shared.gpr config.status: creating Makefile.conf configure: --------- Summary for GNAT Components -------------- configure: Shared libraries: no (default: static) configure: Static PIC libraries: no (see --enable-static-pic) configure: Gtk+: no (requires pkg-config and gtkada.gpr) configure: Python: no no (see --with-python) configure: PyGtk: no (see --enable-pygtk) configure: PyGObject: no (see --enable-pygobject) configure: Syslog: no (see --enable-syslog) configure: Readline (GPL license): no (see --with-readline --enable-gpl) configure: gmp: no (see --with-gmp) configure: PostgreSQL: no (see --with-postgresql) configure: Sqlite: no (see --with-sqlite) configure: Iconv: no (see --with-iconv) configure: Projects: no configure: install libgpr to override configure: Xref: no configure: -------------------------------------------- ====== Building static libraries ====== gprbuild -p -m -j0 -XLIBRARY_TYPE=static -XGnatcoll_Build=Production -Pgnatcoll_full object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/obj" created object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/obj/gnatcoll/static" created for project gnatcoll library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/lib/gnatcoll/static" created for project gnatcoll object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/obj/python/static" created for project gnatcoll_python library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/lib/python/static" created for project gnatcoll_python object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/obj/postgres/static" created for project gnatcoll_postgres library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/lib/postgres/static" created for project gnatcoll_postgres object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/obj/sqlite/static" created for project gnatcoll_sqlite library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/lib/sqlite/static" created for project gnatcoll_sqlite object directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/obj/readline/static" created for project gnatcoll_readline library directory "/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/gnatcoll/src/lib/readline/static" created for project gnatcoll_readline gcc-4.6 -c -O2 -gnatn -gnatwaCJ gnatcoll-readline.adb gcc-4.6 -c -O2 -gnatn -gnatwaCJ gnatcoll-sql-sqlite-builder.adb gnatcoll-refcount.ads:176:15: aspect identifier expected gnatcoll-refcount.ads:248:48: missing ";" gnatcoll-refcount.ads:249:10: "with" can only appear in context clause compilation of gnatcoll-sql-sqlite-builder.adb failed gprbuild: *** compilation phase failed make[7]: *** [build_library_type/static] Error 4 make[6]: *** [/home/ubuntu/genode/build/muen/kernel/muen/contrib/gnatcoll/tmp/.gnatcoll-build] Error 2 make[5]: *** [build_recipes] Error 1 make[4]: *** [contrib] Error 2 Genode - Release notes for the Genode OS Framework 16.08<https://genode.org/documentation/release-notes/16.08#Experimental_version_o…> genode.org Release notes for the Genode OS Framework 16.08. The formal verification of software has become an intriguing direction to overcome the current state of omnipresent ... So please help to me build the muen. Regards, S.SIVA REDDY.

2 1

Planning of Hack'n'Hike 2018 gathering
by Martin Stein 16 May '17

16 May '17

Hey guys, Like in the past years, the Hack'n'Hike 2017 was a big success to us. We had a great hike through the Zittauer mountain landscape, enjoyed the view from atop of several extraordinary rock formations, and visited the beautiful monastery ruin in Oybin. >From the hacking perspective, probably the most significant project was the Quake 3 scenario of @cnuke and @ssumpf. They achieved to let us play Quake 3 on Genode in LAN multiplayer in the end. With fluent 70-120 FPS using the Intel GPU driver and low-latency sound. That was a great experience and a lot of fun. Furthermore, there were projects working on a Freeciv port, Raspberry Pi 3 support, native i.MX USB support, tooling for the new depot/package system, Virtualbox 5 support in Muen, and more ... . That said, we'd like to invite you to continue hacking and hiking with us in 2018 ;-) This github issue [1] is meant as base for organizing, joining in, and getting informed. So, please feel free to post there if you have questions or suggestions regarding the Hack'n'Hike and, if you're interested, keep an eye on the issue as we will post all news in there. Cheers, Martin [1] https://github.com/genodelabs/genode/issues/2412

1 0

lighttpd.run
by Baconicsynergy 10 May '17

10 May '17

Hello! I've successfully compiled lighttpd.run on both seL4 and NOVA and set a static ip in the <libc> node as described in an earlier mailing list post. The lighttpd server runs perfectly under qemu! But when I burn the iso to a usb and attempt to boot from virtualbox and a variety of different hardware devices, it gets stuck at the original "Genode on sel4".....boot_ and I'm just left with a blinking cursor after boot. Am I missing something?

2 1

Install Genode OS Build
by Echedey López Romero 06 May '17

06 May '17

Hi. I would like to install my GenodeOS' Build. How could I make it? -- Regards, CitoplasmaX

1 0

XML editing for dynamic subsystems
by Emery Hemingway 06 May '17

06 May '17

Hello list, To continue last month's interactive GUI thread, I have a proposal for the interplay between GUIs and the subsystem manager. I too would like a new way of launching and managing subsystems, but I prefer not dedicate any on-screen area for persistent menus. I would also live without any buttons if I could. I did some prototyping and found that I gravitate towards short-lived terminal components for user interaction as opposed to long-lived components such as cli_monitor or launcher. Rather than rework what I had into something that can appear and disappear in its lifetime, I figured that XML editing via Report sessions can support ephemeral menus and would require no modification of existing components. I have a simple proof of concept that opens a file for writing and responds to Report requests to add or remove XML nodes from the file's top-level element. This combined with fs_rom is enought to dynamically add and remove subsystems from init. Its too rough to publish now but it never need be a complictated implementation. I mentioned this to Christian Helmuth off-list and he suggested that it would be a transactional editor, which makes perfect sense. The tree can contain inline edit annotations or the XML could be stored as different revision files with a symlink pointer to the current version. This would allow for configuration replay without a lot of overhead or specialized tooling. Does this seem like a reasonable style of init mangagment that we can all get along with, I missing something? cheers, Emery

2 2

Nova demo with GUI
by Chris Rothrock 03 May '17

03 May '17

In the release notes of Genode version 14.02 there is a screenshot of a GUI environment that has two VirtualBox windows, one running TinyCore, one running Windows 7 (https://genode.org/documentation/release-notes/14.02). How do I reproduce this example? When I run the make run/virtualbox demo there is no GUI (until I get into one guest OS GUI, TinyCore), there is only a text-based boot environment then the hand-off to VirtualBox in that text environment. I need to be able to successfully boot up into that GUI environment and demonstrate two distinct VM's are running. Any assistance in this effort would be greatly appreciated. -- Thank You, Chris Rothrock Senior System Administrator (315) 308-1637

3 3

Re: Re: Genode on i.MX6 (eMMC Flash)
by Kranthi Tej 03 May '17

03 May '17

Hello Stefan, Thank you for the quick response. Yes, I've been following the parallel thread and I've made the necessary changes in the "/repos/base/include/spec/imx6/drivers/board_base.h" file. I've set the following values: *UART_1_IRQ = 57,UART_1_MMIO_BASE = 0x021e8000,* *RAM0_SIZE = 0x20000000,* It turns out I was flashing it the wrong way. I've fixed it by drawing insights from how Android is currently being flashed onto the device. I've followed a similar procedure. After installing the bootloader, I've flashed the Genode uImage (generated using RUN_OPT += --include image/uboot) onto the device as per your advice. Flashing was successfully done. Upon booting up, I got the following: U-Boot 2009.08-dirty (Jul 08 2016 - 12:21:39) CPU: Freescale i.MX6 family TO1.5 at 792 MHz Thermal sensor with ratio = 175 Temperature: 37 C, calibration data 0x5534ce69 mx6q pll1: 792MHz mx6q pll2: 528MHz mx6q pll3: 480MHz mx6q pll8: 50MHz ipg clock : 66000000Hz ipg per clock : 66000000Hz uart clock : 80000000Hz cspi clock : 60000000Hz ahb clock : 132000000Hz axi clock : 264000000Hz emi_slow clock: 132000000Hz ddr clock : 528000000Hz usdhc1 clock : 198000000Hz usdhc2 clock : 198000000Hz usdhc3 clock : 198000000Hz usdhc4 clock : 198000000Hz nfc clock : 24000000Hz Board: i.MX6Q-SABRESD: unknown-board Board: 0x63015 [POR ] Boot Device: MMC HAB Configuration: 0xf0, HAB State: 0x66 --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x1c 0x41 0x33 0x18 0xc0 0x00 0xca 0x00 0x14 0x00 0x02 0xc5 0x00 0x00 0x00 0x00 0x0d 0x34 0x27 0x80 0x04 0x00 0x00 0x13 0xec 0x00 --------- HAB Event 2 ----------------- event data: 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 0x00 0x00 0x00 0x00 0x27 0x80 0x04 0x00 0x00 0x00 0x00 0x20 --------- HAB Event 3 ----------------- event data: 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 0x00 0x00 0x00 0x00 0x27 0x80 0x04 0x2c 0x00 0x00 0x02 0xa0 --------- HAB Event 4 ----------------- event data: 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 0x00 0x00 0x00 0x00 0x27 0x80 0x04 0x20 0x00 0x00 0x00 0x01 --------- HAB Event 5 ----------------- event data: 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 0x00 0x00 0x00 0x00 0x27 0x80 0x06 0xe0 0x00 0x00 0x00 0x04 I2C: ready DRAM: 1 GB MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3 *** Warning - bad CRC or MMC, using default environment In: serial Out: serial Err: serial Found PFUZE100! deviceid=10,revid=11 Net: got MAC address from IIM: 00:00:00:00:00:00 FEC0 [PRIME] Hit any key to stop autoboot: 0 booti: bad boot image magic fastboot is in init......flash target is MMC:3 wait usb cable into the connector! So, I've tried to write the image at an address and have loaded it from there. I've did the following in the uboot prompt: MX6Q SABRESD U-Boot > ext2load mmc 3:1 0x30000000 uImage Loading file "uImage" from mmc device 3:1 (xxd1) 594591 bytes read MX6Q SABRESD U-Boot > bootm 0x30000000 ## Booting kernel from Legacy Image at 30000000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 594527 Bytes = 580.6 kB Load Address: 10001000 Entry Point: 10001000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... It stops here (even after adjusting the *UART* settings before building the image). I've also tried *UART1* *(0x02020000)*, *UART3* (*0x021ec000*), *UART4* *(**0x021f0000**)* and *UART5 (**0x021F4000**) *with the same interrupt values. I've built the uImage for log (make run/log) and demo (make run/demo). I'm facing the same issue. I'm unable to find the source of the problem. Can you give me any leads on the possible problems? Thanks, Kranthi On Thu, Apr 6, 2017 at 12:07 AM, Kranthi Tej <ee13b037@...484...> wrote: > Hello Stefan, > > Thank you for the quick response. > > Yes, I've been following the parallel thread and I've made the necessary > changes in the "/repos/base/include/spec/imx6/drivers/board_base.h" file. > I've set the following values: > UART_1_IRQ = 57, > UART_1_MMIO_BASE = 0x021e8000, > RAM0_SIZE = 0x20000000. > > It turns out I was flashing it the wrong way. I've fixed it by drawing > insights from how Android is currently being flashed onto the device. I've > followed a similar procedure. After installing the bootloader, I've flashed > the Genode uImage (generated using RUN_OPT += --include image/uboot) onto > the device as per your advice. Flashing was successfully done. Upon booting > up, I got the following: > > U-Boot 2009.08-dirty (Jul 08 2016 - 12:21:39) > > CPU: Freescale i.MX6 family TO1.5 at 792 MHz > Thermal sensor with ratio = 175 > Temperature: 37 C, calibration data 0x5534ce69 > mx6q pll1: 792MHz > mx6q pll2: 528MHz > mx6q pll3: 480MHz > mx6q pll8: 50MHz > ipg clock : 66000000Hz > ipg per clock : 66000000Hz > uart clock : 80000000Hz > cspi clock : 60000000Hz > ahb clock : 132000000Hz > axi clock : 264000000Hz > emi_slow clock: 132000000Hz > ddr clock : 528000000Hz > usdhc1 clock : 198000000Hz > usdhc2 clock : 198000000Hz > usdhc3 clock : 198000000Hz > usdhc4 clock : 198000000Hz > nfc clock : 24000000Hz > Board: i.MX6Q-SABRESD: unknown-board Board: 0x63015 [POR ] > Boot Device: MMC > > HAB Configuration: 0xf0, HAB State: 0x66 > > --------- HAB Event 1 ----------------- > event data: > 0xdb 0x00 0x1c 0x41 0x33 0x18 0xc0 0x00 > 0xca 0x00 0x14 0x00 0x02 0xc5 0x00 0x00 > 0x00 0x00 0x0d 0x34 0x27 0x80 0x04 0x00 > 0x00 0x13 0xec 0x00 > > --------- HAB Event 2 ----------------- > event data: > 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 > 0x00 0x00 0x00 0x00 0x27 0x80 0x04 0x00 > 0x00 0x00 0x00 0x20 > > --------- HAB Event 3 ----------------- > event data: > 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 > 0x00 0x00 0x00 0x00 0x27 0x80 0x04 0x2c > 0x00 0x00 0x02 0xa0 > > --------- HAB Event 4 ----------------- > event data: > 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 > 0x00 0x00 0x00 0x00 0x27 0x80 0x04 0x20 > 0x00 0x00 0x00 0x01 > > --------- HAB Event 5 ----------------- > event data: > 0xdb 0x00 0x14 0x41 0x33 0x0c 0xa0 0x00 > 0x00 0x00 0x00 0x00 0x27 0x80 0x06 0xe0 > 0x00 0x00 0x00 0x04 > I2C: ready > DRAM: 1 GB > MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3 > *** Warning - bad CRC or MMC, using default environment > > In: serial > Out: serial > Err: serial > Found PFUZE100! deviceid=10,revid=11 > Net: got MAC address from IIM: 00:00:00:00:00:00 > FEC0 [PRIME] > Hit any key to stop autoboot: 0 > booti: bad boot image magic > fastboot is in init......flash target is MMC:3 > wait usb cable into the connector! > > So, I've tried to write the image at an address and have loaded it from > there. I've did the following in the uboot prompt: > > MX6Q SABRESD U-Boot > ext2load mmc 3:1 0x30000000 uImage > Loading file "uImage" from mmc device 3:1 (xxd1) > 594591 bytes read > > MX6Q SABRESD U-Boot > bootm 0x30000000 > ## Booting kernel from Legacy Image at 30000000 ... > Image Name: > Image Type: ARM Linux Kernel Image (gzip compressed) > Data Size: 594527 Bytes = 580.6 kB > Load Address: 10001000 > Entry Point: 10001000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > > Starting kernel ... > > It stops here (even after adjusting the UART settings before building the > image). I'm unable to find the source of the problem. Can you give me any > leads on the possible problems? > > Thanks, > Kranthi > > On Wed, Mar 29, 2017 at 6:18 PM, Kranthi Tej <ee13b037@...484...> > wrote: > >> ---------- Forwarded message ---------- >> From: "Stefan Kalkowski" <stefan.kalkowski@...1...> >> Date: Mar 29, 2017 6:03 PM >> Subject: Re: Genode on i.MX6 (eMMC Flash) >> To: "Genode OS Framework Mailing List" <genode-main(a)lists.sourceforge.net >> > >> Cc: >> >> Hi Kranthi Tej, >> >> On 03/28/2017 12:30 PM, Kranthi Tej wrote: >> > Hi Stefan, >> > >> > I've tried using the uboot plugin (RUN_OPT += --include image/uboot). >> > I've been able to generate a uImage successfully. When I tried to flash >> > it on to the board, it stops with following log (was observed in >> > TeraTerm while using the MfgTool): >> > >> > U-Boot 2009.08 (Aug 16 2013 - 14:38:59) >> > >> > CPU: Freescale i.MX6 family TO1.5 at 792 MHz >> > Thermal sensor with ratio = 175 >> > Temperature: 42 C, calibration data 0x5524cd69 >> > mx6q pll1: 792MHz >> > mx6q pll2: 528MHz >> > mx6q pll3: 480MHz >> > mx6q pll8: 50MHz >> > ipg clock : 66000000Hz >> > ipg per clock : 66000000Hz >> > uart clock : 80000000Hz >> > cspi clock : 60000000Hz >> > ahb clock : 132000000Hz >> > axi clock : 264000000Hz >> > emi_slow clock: 132000000Hz >> > ddr clock : 528000000Hz >> > usdhc1 clock : 198000000Hz >> > usdhc2 clock : 198000000Hz >> > usdhc3 clock : 198000000Hz >> > usdhc4 clock : 198000000Hz >> > nfc clock : 24000000Hz >> > Board: i.MX6Q-SABRESD: unknown-board Board: 0x63015 [POR ] >> >> As I can see you are using another board with less memory than the >> Wandboard. Did you adapted the memory settings before building the >> Genode image for that board? >> Like it was discussed in this parallel mail thread: >> >> http://genode-main.narkive.com/nWs1hbc8/genode-on-i-mx6q-sabre-lite >> >> > Boot Device: MMC >> > I2C: ready >> > DRAM: 1 GB >> > MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3 >> > Using default environment >> > >> > In: serial >> > Out: serial >> > Err: serial >> > Net: got MAC address from IIM: 00:00:00:00:00:00 >> > FEC0 [PRIME] >> > Hit any key to stop autoboot: 0 >> > ## Booting kernel from Legacy Image at 10800000 ... >> > Image Name: >> > Image Type: ARM Linux Kernel Image (gzip compressed) >> > Data Size: 2075251 Bytes = 2 MB >> > Load Address: 10001000 >> > Entry Point: 10001000 >> > Verifying Checksum ... OK >> > ## Loading init Ramdisk from Legacy Image at 10c00000 ... >> > Image Name: uboot initramfs rootfs >> > Image Type: ARM Linux RAMDisk Image (gzip compressed) >> > Data Size: 4545326 Bytes = 4.3 MB >> > Load Address: 00000000 >> > Entry Point: 00000000 >> > Verifying Checksum ... OK >> > Uncompressing Kernel Image ... OK >> > >> > Starting kernel ... >> > >> > Also, I'm using the Android RAMDisk Image. Would that be a potential >> > cause for the problem? I've used the following XML script to flash the >> > image on to the board (UCL file for MfgTool): >> >> If you think the Android RAM disk might interfer with your Genode image, >> being in your position I would not load it in the first place. >> >> > >> > <UCL> >> > <CFG> >> > <STATE name="BootStrap" dev="MX6Q" vid="15A2" pid="0054"/> >> > <STATE name="Updater" dev="MSC" vid="066F" pid="37FF"/> >> > </CFG> >> > >> > <LIST name="SabreSD-eMMC" desc="Choose eMMC as media"> >> > <CMD state="BootStrap" type="boot" body="BootStrap" file >> > ="u-boot-mx6q-sabresd.bin" >Loading U-boot</CMD> >> > <CMD state="BootStrap" type="load" file="files/demo/uimage" >> > address="0x10800000" >> > loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >> >>Loading Kernel.</CMD> >> > <CMD state="BootStrap" type="load" file="initramfs.cpio.gz.uboot" >> > address="0x10C00000" >> > loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >> >>Loading Initramfs.</CMD> >> > <CMD state="BootStrap" type="jump" > Jumping to OS image. </CMD> >> > <CMD state="Updater" type="push" body="$ dd if=/dev/zero of=/dev/mmcblk0 >> > bs=512 seek=1536 count=16">clean up u-boot parameter</CMD> >> >  >> > <CMD state="Updater" type="push" body="$ echo 0 > >> > /sys/block/mmcblk0boot0/force_ro">access boot partition 1</CMD> >> > <CMD state="Updater" type="push" body="send" >> > file="files/demo/mmc_img">Sending U-Boot</CMD> >> > <CMD state="Updater" type="push" body="$ dd if=$FILE of=/dev/mmcblk0 >> > bs=512 seek=2 skip=2">write U-Boot to sd card</CMD> >> >  >> > <CMD state="Updater" type="push" body="$ echo 8 > >> > /sys/devices/platform/sdhci-esdhc-imx.3/mmc_host/mmc0/mmc0:0 >> 001/boot_config">access >> > user partition and enable boot partion 1 to boot</CMD> >> > <CMD state="Updater" type="push" body="send" >> > file="mksdcard-android.sh.tar">Sending partition shell</CMD> >> > <CMD state="Updater" type="push" body="$ tar xf $FILE "> >> > Partitioning...</CMD> >> > <CMD state="Updater" type="push" body="$ sh mksdcard-android.sh >> > /dev/mmcblk0"> Partitioning...</CMD> >> > <CMD state="Updater" type="push" body="$ ls -l /dev/mmc* ">Formatting sd >> > partition</CMD> >> > <CMD state="Updater" type="push" body="pipe dd of=/dev/mmcblk0p5 bs=512" >> > file="files/demo/demo.img">Sending and writting demo.img</CMD> >> > <CMD state="Updater" type="push" body="frf">Finishing rootfs write</CMD> >> > <CMD state="Updater" type="push" body="$ echo Update >> Complete!">Done</CMD> >> > </LIST> >> > </UCL> >> > >> > The script stops executing at "Jumping to OS image". Can you give me any >> > leads as to where I'm going wrong? >> > >> >> As I already told you, I do not have any experiences with that tool, but >> you probably encounter the same problems like when using the uImage above. >> >> > Note: I've generated the "mmc_img" file using the "create_uboot" tool >> > provided in the genode tools. >> >> I see. In contrast to the run-tool, which produces either a disk image >> or uImage, this utility creates a disk image with the u-boot binary >> only. I'm not sure whether you can use the same u-boot binary in between >> Wandboard and your board, probably not! >> >> We do not have a combination tool that combines u-boot and system image >> to provide one final disk image to you. >> >> Best regards >> Stefan >> >> -- >> Stefan Kalkowski >> Genode Labs >> >> https://github.com/skalk · http://genode.org/ >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> genode-main mailing list >> genode-main(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/genode-main >> > >

3 18

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users