users April 2023

users@lists.genode.org

17 participants
20 discussions

Avoiding fetchurl restarts
by Timo Nicolai 19 Apr '23

19 Apr '23

Dear Genodians, I have noticed that at least when running on Linux, the fetchurl component started by depot_download_manager will always restart immediately after it is first executed (before anything has been downloaded). After that the download proceeds as normal. This is because Fetchurl_watchdog uses trigger_periodic to trigger the timer handler which checks the current download progress. As a consequence, this handler /might/ be called immediately, before fetchurl has had the … [View More]

3 2

Request for testing: updated ported Intel display driver
by Alexander Boettcher 19 Apr '23

19 Apr '23

Hello, currently we are testing our updates of ported Linux drivers [0] on various generations of Intel hardware. The available test hardware in the lab works fine, so far, but we can't be sure whether it applies to all systems out there. You may support us, and thereby the next Sculpt release, by test driving the prepared images. The images are bootable via USB stick and can be prepared similar as documented for Sculpt [2]. With the tests by you, we may detect regression earlier, e.g. before … [View More]the Sculpt release. The test is very simple (and not sensational at all) and cycles through some test pictures. When external monitors are attached, the test pictures are mirrored across all connectors. The resolution changes automatically to the largest resolution available, so that monitors with smaller resolution will just show a part of the test picture (so, it is expected behavior). Image [3] contains the driver based upon Linux kernel 6.1 as be part of Genode staging branch. Image [4] is a variation, which tries to use more of the drm/kms interfaces [2] (and is still work-in-progress). Ideally, both just work. Please also try to attach/detach connectors multiple times to stress the driver a bit. If [3] and [4] does not work (or one of them), it would be nice, to give the 5.14. based driver [5] a spin. With this information we can see, whether it never worked on your system or it is really a regression due to the update to 6.1. If it works for you, it would be good to know about. If it does not work, it would be even better to know about. In both cases, the specification of your hardware would be appreciated. If you don't want to spread the information publicly, you may also write me a direct message. Luxurious support would be, if you can send a captured trace via uart/serial/amt [6] in case something does not work for you. Please send captured logs directly to me, just to avoid spamming the mailing list. Thanks for your support & have a nice Easter, Alex. [0] https://github.com/genodelabs/gnode/issues/4798 [1] https://github.com/genodelabs/genode/issues/4806 [2] https://genode.org/download/sculpt#Preparing_a_bootable_USB_stick_on_Unix [3] https://depot.genode.org/alex-ab/images/intel_display_6_1.img [4] https://depot.genode.org/alex-ab/images/intel_display_6_1_drm_kms.img [5] https://depot.genode.org/alex-ab/images/intel_display_5_14.img [6] https://genodians.org/chelmuth/2019-01-16-test-machine The used branches of [3][4][5] are available via at https://github.com/alex-ab/genode, branch intel_display_5_14, intel_display_6_1, intel_display_6_1_drm_kms. -- Alexander Boettcher Genode Labs https://www.genodians.org - https://www.genode.org [View Less]

3 4

Unable to load the drivers while booting sculpt image - virt_qemu_riscv
by Pranab Kumar Rout cs21m045 18 Apr '23

18 Apr '23

Hello Genodians, I am able to generate the sculpt image for virt_qemu_riscv. But while booting the "image.elf", its unable to load some of the drivers. I have attached the LOG and other necessary files for reference. Please help me out and suggest the needful. Regards, Pranab

2 1

Running a program on Genode (Riscv)
by Pranab Kumar Rout cs21m045 18 Apr '23

18 Apr '23

Hello Genodians, I want to run a C - Program on Genode over virt_qemu_riscv. I think Java support is not there for riscv. So I want to go with C. Kindly guide me on this. Also enlighten about the compilation. Regards Pranab

3 2

Unable to load the drivers while booting sculpt image - virt_qemu_riscv
by Martin Stein 18 Apr '23

18 Apr '23

Hi Pranab, This message: Error: <component name>: environment ROM session denied (label="<component name>", ram_quota=6144, cap_quota=3, diag=0) means that your system image is missing the ELF/binary image of the component you're trying to start. This indicates that the archive list in your pkg/drivers_interactive-virt_qemu_riscv/archives file (that adds binaries to your system image) and the <start> nodes in your raw/drivers_interactive-virt_qemu_riscv/drivers.config file … [View More]

1 0

Installing software in genode
by Divya Sharma 17 Apr '23

17 Apr '23

Hello Genodian, How to install special-purpose software/Apps in genode? Like we create/install the software in windows. Please suggest some document Thanks & regards Divya

6 17

dde_linux port fatal error - sculpt for virt qemu riscv
by Pranab Rout 16 Apr '23

16 Apr '23

Hello genodians, While building sculpt for virt_qemu_riscv, I came across the following error, which I believe is related to dde_linux. Please have a look and kindly suggest the modifications required. checking library dependencies... Library ldso_so_support COMPILE so_support.o MERGE ldso_so_support.lib.a Library ld CONVERT ld.symbols.s ASSEMBLE ld.symbols.o MERGE ld.abi.so Library base MERGE base.lib.a Library config MERGE config.lib.a … [View More]

4 4

java arm_v7a stdin & stdout
by Devashish Dewangan cs21m017 11 Apr '23

11 Apr '23

Hello genodians, I am exploring the java arm_v7a & I want to use the terminal for stdin & stdout. I am able to get stdin and stdout to terminal by configuring java.run and every output is redirected to terminal instead of log. I am attaching the snap of output. I want to have the java program stdin & stdout happen via terminal and the compilation & running the byte code related information in the log. How can I achieve this? -- Regards, Devashish Dewangan CS21M017

2 3

errors while installing 3rd party software
by Divya Sharma 10 Apr '23

10 Apr '23

Greetings everyone, During my attempt to install third-party software, I encountered some errors. It dawned on me that there might be an issue with the software installation process, as I even encountered errors while installing "backdrop" wallpaper and "nano3d". [runtime -> nano3d] Error: LD: symbol not found: 'typeinfo for Genode::Conso' [runtime -> nano3d] Error: Uncaught exception of type 'Linker::Not_found' Could someone please take a look at the error and provide some … [View More]

2 1

Regarding ARM on Genode
by Divya Sharma 10 Apr '23

10 Apr '23

hello genodians, I'm Trying to port Genode OS for i.MX 8MQ boards (arm_v8a). successfully generated .img file but don't know how to run this img file i don't have i.MX board so I have to run on Ubuntu (linux). I have tried qemu emulator but i think qemu doesn't supported board. (basically want to run genode os for ARM.) Please give some guidance on this. Thanks & Regards

6 25

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

users April 2023