usb_drv error -92 for RPi | Genode 18.05 with Fiasco.OC 79

[Alexander Weidinger]

Hi Stefan, hi everyone,

unfortunately I'm still struggling with the USB driver (and therefore
Network) of the Raspberry Pi 2 (and 3).

As one can see, for the RPi 3 sometimes! the USB driver works and
therefore I assume the same should be possible for the RPi 2.
At least they they do share the same USB/Network-Chip (LAN9514).

I checked the memory map and adapted the base addresses accordingly,
the interrupts seem to have not changed between RPi 1 and RPi 2
(apart from the multicore aspect).

Even some USB urbs are sent until the error -92 appears.

I currently have no idea where else to look and therefore I would be
helpful for any hints I can get, regarding how I should continue to
solve the problem I have with the USB driver.

Is the usb_otg/usb_dwc driver just not compatible with the Raspberry Pi
2 and I should look at the current driver situation in the Linux Kernel?
As far as I know usb_otg/usb_dwc was used in the early time for the
Raspberry Pi 2 until it got replaced by dwc2?
Anyone has an idea if/what big difference there is between the driver
versions dwc and dwc2?
Would it make sense to look at the new driver and port it to Genode?

I saw that some changes were made regarding the USB support in Genode
with version 18.08 - does this change anything for the RPi?

Thanks in advance! Any help is appreciated!

Regards,
Alexander