Reboot on ArmV8

[Stefan Kalkowski]

Hello Shashank,

On Wed, Jun 29, 2022 at 01:43:05PM +0200, Shashank Anand wrote:
> Regarding resetting the IMX8MM board, I have found a better solution that
> does not require kernel privilege. The board can be reset by clearing the
> WDA bit of the Watchdog Control Register (WDOG1_WCR). Clearing the WDA bit
> triggers the WDOG_B signal which performs a system reset.

that is good to know. Again the platform driver seems the natural
component to control the Watchdog Control Register.

Regards
Stefan

-- 
Stefan Kalkowski
Genode labs

https://github.com/skalk | https://genode.org