usb issues on AMD 9xx chipset

[Nobody III]

No. I can use platform_drv just fine without usb_drv, and even with fb_drv.

On Sat, Mar 31, 2018, 10:32 AM Chris Rothrock <cgrothrock at ...9...> wrote:

> if you don't load the usb_drv, does the platform_drv still run out of caps?
>
> On Sat, Mar 31, 2018 at 2:46 AM, Nobody III <hungryninja101 at ...9...>
> wrote:
>
>> I've been testing Genode's current compatibility with my desktop
>> computer, which has an AMD 9xx chipset. While the framebuffer driver works
>> fine, usb_drv does not.
>>
>> Here's the full output:
>>
>> Genode 18.02-2-g6888094f6 <local changes>
>> 16299 MiB RAM and 63253 caps assigned to init
>> [init -> acpi_drv] Found MADT
>> [init -> acpi_drv] MADT IRQ 0 -> GSI 2 flags: 0
>> [init -> acpi_drv] MADT IRQ 9 -> GSI 9 flags: 15
>> [init -> acpi_drv] Found MCFG
>> [init -> acpi_drv] MCFG BASE 0xe0000000 seg 0x0 bus 0x0-0xff
>> [init -> platform_drv] 0:2.0 - bridge 1:0.0
>> [init -> platform_drv] 0:9.0 - bridge 2:0.0
>> [init -> platform_drv] 0:14.4 - bridge 3:0.0
>> [init -> platform_drv] 0:15.0 - bridge 4:0.0
>> [init -> platform_drv] 0:15.3 - bridge 5:0.0
>> [init -> usb_drv] Could not read screen resolution in config node
>> [init -> usb_drv] Configured HID screen with 0x0 (multitouch=false)
>> [init -> usb_drv] No <storage> config node found - not starting the USB
>> Storage (Block) service
>> [init -> usb_drv] No <nic> config node found - not starting the USB Nic
>> (Network) service
>> [init -> usb_drv] No <raw> config node found - not starting external USB
>> service
>> [init -> usb_drv] Enabled UHCI (USB 1.0/1.1) support
>> [init -> usb_drv] Enabled OHCI (USB 1.0/1.1) support
>> [init -> usb_drv] Enabled EHCI (USB 2.0) support
>> [init -> usb_drv] Enabled XHCI (USB 3.0) support
>> *[init -> platform_drv] Warning: Out_of_caps during Device_component
>> construction*
>> *[init -> platform_drv] Warning: Out_of_caps during Device_component
>> construction*
>> *[ 0] sys_assign_pci: Invalid Hint (0x200)*
>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device 2:0.0
>> failed phys=0xe0200000 virt=0x80400000
>> [init -> usb_drv] ioremap: mapped phys 0xfe100000 (size 32768) to virt
>> 0x20000
>> [init -> usb_drv] dev_info: xHCI Host Controller
>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 1
>> [init -> usb_drv] dev_info: hcc params 0x040040a5 hci version 0x100
>> quirks 0x00000010
>> [init -> platform_drv] 2:0.0 adjust IRQ as reported by ACPI: 10 -> 48
>> [init -> platform_drv] 2:0.0 uses MSI 64bit, vector 0x9f, address
>> 0xfee10000, maskable
>> [init -> usb_drv] dev_info: USB hub found
>> [init -> usb_drv] dev_info: 4 ports detected
>> [init -> usb_drv] dev_info: xHCI Host Controller
>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 2
>> [init -> usb_drv] dev_info: We don't know the algorithms for LPM for this
>> host, disabling LPM.
>> [init -> usb_drv] dev_info: USB hub found
>> [init -> usb_drv] dev_info: 4 ports detected
>> [ 0] sys_assign_pci: Invalid Hint (0xb2)
>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>> 0:16.2 failed phys=0xe00b2000 virt=0x1000
>> [init -> usb_drv] ioremap: mapped phys 0xfe204000 (size 256) to virt
>> 0x17000
>> [init -> usb_drv] dev_info: EHCI Host Controller
>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 3
>> [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI
>> dummy qh workaround
>> [init -> platform_drv] 0:16.2 adjust IRQ as reported by ACPI: 11 -> 17
>> [init -> platform_drv] 0:16.2 uses IRQ, vector 0x11, non-maskable
>> [init -> usb_drv] dev_info: irq 130, io mem 0xfe204000
>> [init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00
>> [init -> usb_drv] dev_info: USB hub found
>> [init -> usb_drv] dev_info: 4 ports detected
>> [ 0] sys_assign_pci: Invalid Hint (0x9a)
>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>> 0:13.2 failed phys=0xe009a000 virt=0x1000
>> [init -> usb_drv] ioremap: mapped phys 0xfe207000 (size 256) to virt
>> 0x28000
>> [init -> usb_drv] dev_info: EHCI Host Controller
>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 4
>> [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI
>> dummy qh workaround
>> [init -> platform_drv] 0:13.2 adjust IRQ as reported by ACPI: 11 -> 17
>> [init -> platform_drv] 0:13.2 uses IRQ, vector 0x11, non-maskable
>> [init -> usb_drv] dev_info: irq 131, io mem 0xfe207000
>> [init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00
>> [init -> usb_drv] dev_info: USB hub found
>> [init -> usb_drv] dev_info: 5 ports detected
>> [ 0] sys_assign_pci: Invalid Hint (0x92)
>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>> 0:12.2 failed phys=0xe0092000 virt=0x1000
>> [init -> usb_drv] ioremap: mapped phys 0xfe209000 (size 256) to virt
>> 0x29000
>> [init -> usb_drv] dev_info: EHCI Host Controller
>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number 5
>> [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI
>> dummy qh workaround
>> [init -> platform_drv] 0:12.2 adjust IRQ as reported by ACPI: 11 -> 17
>> [init -> platform_drv] 0:12.2 uses IRQ, vector 0x11, non-maskable
>> [init -> usb_drv] dev_info: irq 132, io mem 0xfe209000
>>
>> Also, I get the following message in dmesg on linux (from
>> drivers/usb/host/pci-quirks.c), but not from usb_drv:
>> QUIRK: Enable AMD PLL fix
>>
>> What might be going on? Why would usb_drv cause platform_drv to run out
>> of CAPs, even when I assign it 2000 CAPs (instead of 800)?
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> genode-main mailing list
>> genode-main at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/genode-main
>>
>>
>
>
> --
>
>
> Thank You,
>
> Chris Rothrock
> Senior System Administrator
> (315) 308-1637
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> genode-main mailing list
> genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20180331/8e464bb7/attachment.html>