Serial Output on RaspberryPI

[Reinier Millo Sánchez]

Hello Stefan
I have tested succesfully the serial output with Rasbian (9600 and 
115200 baud) and Fiasco.OC with L4Re (9600 baud), with Genode have tried 
with 115200 baud but don't work for me.

Regards
Millo

On 01/09/2015 02:29 AM, Stefan Kalkowski wrote:
> Hello Reinier,
>
> the configuration to use serial output from the Raspberry Pi is the same
> like if you use Linux on top of it. Did you succeeded to run a
> ready-made Linux SD-card image for your board? I would test it with e.g.
> Raspian (Debian):
>
>    http://raspbian.org/RaspbianImages
>
> to exclude any hardware problems.
>
> Regards
> Stefan
>
> On 01/09/2015 02:23 AM, Reinier Millo Sánchez wrote:
>> Hi Genode community
>> I'm testing GenodeOS on the RaspberryPI. I have compiled and tested some
>> examples using a modified QEMU emulator and real hardware. I'm trying to
>> catch the serial output on real hardware. To catch the serial output,
>> i'm using an Arduino bridge to read the serial output from RaspberryPI
>> and send it to my computer. I have built a level shifter to transform
>> the RaspberryPI 3.3v in 5v. I'm using the UART TX pin (GPIO 8) to get
>> the serial output.
>> When i have tested the examples, can't get the serial output on TX pin.
>> Who can i get the serial output from RaspberryPI?
>>
>> Best regards
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Dive into the World of Parallel Programming! The Go Parallel Website,
>> sponsored by Intel and developed in partnership with Slashdot Media, is your
>> hub for all things parallel software development, from weekly thought
>> leadership blogs to news, videos, case studies, tutorials and more. Take a
>> look and join the conversation now. http://goparallel.sourceforge.net
>>
>>
>>
>> _______________________________________________
>> genode-main mailing list
>> genode-main at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/genode-main
>>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: rmillo.vcf
Type: text/x-vcard
Size: 519 bytes
Desc: not available
URL: <http://lists.genode.org/pipermail/users/attachments/20150109/66849b79/attachment.vcf>