Debug over serial

[Nobody III]

Thanks. I'll try that.
On Nov 11, 2014 6:14 AM, "Christian Prochaska" <
christian.prochaska at ...1...> wrote:

> Hello Ben,
>
> On 11/10/2014 04:44 AM, Nobody III wrote:
> > I have a serial cable and have connected two computers with it, but I
> > haven't been able to figure out how to obtain Genode's boot output. I am
> > currently using the fiasco kernel but I will probably later use fiasco.oc
> > and possibly nova. I heard something about telling the kernel which port
> to
> > use for the serial output. What do I need to do to look at Genode's boot
> > output over serial?
>
> personally, I'm using the 'picocom' program on Linux like this:
>
> picocom -b 115200 /dev/ttyS0
>
> If your serial cable is a USB-to-serial one, the device would probably
> be /dev/ttyUSB0 instead. Depending on your Linux distribution it might
> also be necessary to add your username to a group which allows access to
> the serial device or to run the program as super user.
>
> Christian
>
>
>
> ------------------------------------------------------------------------------
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
> _______________________________________________
> genode-main mailing list
> genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20141111/34100419/attachment.html>