genode-i.mx6

Aditya Kousik adit267.kousik at ...9...
Thu Jun 12 09:45:09 CEST 2014


Hello Mahe,

You can see that the console output gives a lot of hints as to whether it
is the expected output. For starters, the abort call: the kernel has
stopped. Right before that stage, nitpicker says "No route to service
"Framebuffer"' and rightly so. There's no framebuffer driver running for
i.mx6 and secondly, you might not have connected any display for it to even
work.

The demo scenario is a behemoth for initial development with the board. As
I'd mentioned in the wiki, try exploring simple scripts like run/printf,
run/nested_init to get a feel for the build process.

Cheers
Aditya


On Thu, Jun 12, 2014 at 12:50 PM, Mahe Mohan <mahemscse at ...9...> wrote:

> Hello ,
> Thanks for your help . I did the steps given in the wiki. We cloned the
> repos then created the build directory and We compiled using
>
> RUN_OPT="--target uboot" make run/demo
>
> Then we copied the image from the build/var/run/demo/uImage into the SD
> card.
> After that we connected the board and worked on the following commands.
>
> u-boot> mmc dev 1u-boot> fatload mmc 1:1 0x10800000 uImageu-boot> bootm 10800000
>
> We are getting the following message.
>
>
>  MX6Q SABRELITE U-Boot > bootm 10800000
> ## Booting kernel from Legacy Image at 10800000 ...
>    Image Name:
>
>    Image Type:   ARM Linux Kernel Image (gzip compressed)
>    Data Size:    1977409 Bytes =  1.9 MB
>    Load Address: 10001000
>    Entry Point:  10001e ... OK
>
> Starting kernel ...
>
> int main(): --- create local services ---
>
> int main(): --- start init ---
> int main(): transferred 1019int main(): --- init created, waiting for exit condition ---
> [init] Could not open file "ld.lib.so"
> [init] nitpicker: no route to service "Framebuffer"
>
> [init -> nitpicker] C++ runtime: Genode::Parent::Service_denied
> [init -> nitpicker] void* abort(): abort called
> [init -> launchpad] Could not open file "ld.lib.so"
>
>
>
> wheather is the expected output?
>
>
> Thanks
>
>
>
> ------------------------------------------------------------------------------
> HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
> Find What Matters Most in Your Big Data with HPCC Systems
> Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
> Leverages Graph Analysis for Fast Processing & Easy Data Exploration
> http://p.sf.net/sfu/hpccsystems
> _______________________________________________
> genode-main mailing list
> genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20140612/ab58718c/attachment.html>


More information about the users mailing list