Porting on i.MX6

[Archie Nidhi]

Again thanks for your reply , the board we are using is Nitrogen 6X ,now
the size of our uncompressed file is 4.2MB and compressed is 1.8 MB , the
RAM base address of our board is 0x10000000 and  RAM size is 0x40000000 ,
we tried booting by assigning  load address as 0x10001000
 and the entry point as 10001000 and tftp 0x10800000 . We are stuck at
starting kernel

Bytes transferred = 1829585 (1bead1 hex)

U-Boot > bootm
## Booting kernel from Legacy Image at 10800000 ...
   Image Name:
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    1829521 Bytes = 1.7 MiB
   Load Address: 10001000
   Entry Point:  10005d70
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...


Any Idea what the problem is ?




On Sat, Jul 13, 2013 at 2:36 AM, Frank Kaiser
<frank.kaiser at ...24...>wrote:

>  [image: Boxbe] <https://www.boxbe.com/overview> This message is eligible
> for Automatic Cleanup! (frank.kaiser at ...24...) Add cleanup rule<https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftoken%3DJ2yCAOP%252Fon9av%252FfjYiO%252FPLVDqfuHm8Hvb%252B84zy9fsuHzf3vsbfp3gx4cWaW6TqJXBvOCSM0zQdHwBTTv5s%252FltbnPHNfhaGxlsEyOquxqU4Zs89fwZneWwsED8qlIN6uyn3POSXwP%252FETOGEZ6YUEq8w%253D%253D%26key%3Dz9t%252BxRBLK5AnBu%252FQZl70k70LeDE%252BvAJpTq5q79Otu8w%253D&tc_serial=14613466892&tc_rand=831592992&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>| More
> info<http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=14613466892&tc_rand=831592992&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
>
>  Archie Nidhi schrieb:
>
>   Hi thanks for the reply,I am Archie working with Aditya on this . We
> use your reprository and then followed the steps given in https://github.com/genodelabs/genode/commit/ce58a63fb661df42e6bf283891589b11a1f411f2#commitcomment-2891606
> ,<https://github.com/genodelabs/genode/commit/ce58a63fb661df42e6bf283891589b11a1f411f2#commitcomment-2891606>for creating uImage .
>
> And then booted using tftp with this.
>
> #  either 'dhcp' or 'setenv ipaddr xxx.xxx.xxx.xxx'
> #  'setenv serverip xxx.xxx.xxx.xxx' as long it isn't set via DHCP
> #  'tftp 0x70800000 [path_to_uimage]/uImage'
> #  'bootm 0x70800000'
>
>  Now the error we are getting in this is
>
> Using FEC device
>  TFTP from server 10.6.1.123; our IP address is 10.6.1.122
> Filename 'uImage'.
> Load address: 0x10800000
> Loading: #################################################################
>         #################################################################
>         #################################################################
>         #################################################################
>         #################################################################
>         #################################
> done
> Bytes transferred = 1829585 (1bead1 hex)
> U-Boot > bootm
> ## Booting kernel from Legacy Image at 10800000 ...
>   Image Name:
>   Image Type:   ARM Linux Kernel Image (gzip compressed)
>   Data Size:    1829521 Bytes = 1.7 MiB
>   Load Address: 70140000
>   Entry Point:  7018b33c
>   Verifying Checksum ... OK
>   Uncompressing Kernel Image ...
>
>
>  Any Ideas where we might be going wrong?
>
>    Hello, Archie
>
> Which type of i.MX6 board are you using? The load address 0x70140000 of
> your boot image assumes that your board supports 2 GB of RAM (physical
> address range 0x10000000 to 0x8FFFFFFF). AFAIK not all i.MX6 boards have
> that much memory, others come with 1 GB instead (physical address range
> 0x10000000 to 0x4FFFFFFF). In that case you have to modify the build
> scripts so that the löad address is set to 0x40140000 and the entry point
> to 0x4018b33c (or other values which fit into the 1 GB range).
>
> Frank
>
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>
> _______________________________________________
> Genode-main mailing list
> Genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20130714/6e0018ac/attachment.html>