problem with permanent modification on Sculpt
mantovani.edoardo18 at gmail.com
Tue Feb 23 10:08:19 CET 2021
Hello Norman and Hello Christian,
Thanks for your support!
After some work, I was able to set the AHCI mode for the SATA, now the
"Storage" button in Sculpt works excellent.
This thread can be closed, I think.
Regards and still thanks,
Edoardo Mantovani, 2021
Il giorno mar 23 feb 2021 alle ore 09:45 Norman Feske
<norman.feske at genode-labs.com> ha scritto:
> from looking at the log, one can see that the AHCI driver is not even
> started, which makes sense when comparing the reported PCI class IDs
> against the code of the driver manager that selects the driver .
> It may be worth checking the BIOS settings for SATA-related options. I
> can vaguely remember having seen BIOS options for selecting legacy
> support versus AHCI.
> On 23.02.21 06:39, Christian Helmuth wrote:
> > Hello Edoardo,
> > your SATA PCI devices seem to use a programming interface that's not
> > AHCI compatible.
> > <device bdf="0:1f.2" vendor_id="0x8086" device_id="0x3b2e" class_code="0x1018a" bridge="no" cap="0x1" cap="0x13"/>
> > <device bdf="0:1f.5" vendor_id="0x8086" device_id="0x3b2d" class_code="0x10185" bridge="no" cap="0x1" cap="0x13"/>
> > For AHCI compatibility the class code has to be 0x0106xx. Your devices
> > use 0101xx which is "IDE interface"    and Genode does not
> > support this.
> >  https://pci-ids.ucw.cz/read/PD/01/01
> >  https://pci-ids.ucw.cz/read/PD/01/01/8a
> >  https://pci-ids.ucw.cz/read/PD/01/01/85
> > Regards
> Dr.-Ing. Norman Feske
> Genode Labs
> https://www.genode-labs.com · https://genode.org
> Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
> Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
> Genode users mailing list
> users at lists.genode.org
Independent security researcher
email: Baseband at cpan.org
More information about the users