problem with permanent modification on Sculpt

[Christian Helmuth]

Hello Edoardo,

your SATA PCI devices seem to use a programming interface that's not
AHCI compatible.

<device bdf="0:1f.2" vendor_id="0x8086" device_id="0x3b2e" class_code="0x1018a" bridge="no" cap="0x1" cap="0x13"/>
<device bdf="0:1f.5" vendor_id="0x8086" device_id="0x3b2d" class_code="0x10185" bridge="no" cap="0x1" cap="0x13"/>

For AHCI compatibility the class code has to be 0x0106xx. Your devices
use 0101xx which is "IDE interface" [1] [2] [3] and Genode does not
support this.

[1] https://pci-ids.ucw.cz/read/PD/01/01
[2] https://pci-ids.ucw.cz/read/PD/01/01/8a
[3] https://pci-ids.ucw.cz/read/PD/01/01/85

Regards
-- 
Christian Helmuth
Genode Labs

https://www.genode-labs.com/ · https://genode.org/
https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/

Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth