problem with permanent modification on Sculpt

[Edoardo Mantovani]

Hello,
Yes, I had a similar idea of why the hdd cannot ne accessed from Sculpt,
bit alla other hardwares fit perfectly with the OS.
I al using an elitebook 2540p.


Il giorno lunedì 22 febbraio 2021, Nobody III <hungryninja101 at gmail.com> ha
scritto:

> That sounds like a lack of support for your SATA controller. I've seen
> that on my own computers.
>
> On Sun, Feb 21, 2021, 1:04 AM Edoardo Mantovani <
> mantovani.edoardo18 at gmail.com> wrote:
>
>> Hi Norman,
>> Thanks for the reply, but I have tried Also this before, result: storage
>> doesn't show anything.
>> (See the photo, I've modified it because was excessively heavy)
>> Regards,
>> Edoardo Mantovani
>>
>> Il giorno ven 19 feb 2021 alle ore 21:47 Norman Feske <
>> norman.feske at genode-labs.com> ha scritto:
>>
>>> Hi Edoardo,
>>>
>>> > "Making customizations permanent" here[1], but also without clicking
>>> > into the ram fs filesystem bottoms the /config/  folder resets itself
>>> > after the reboot.
>>> >
>>> > Any Hints? Obviously, I would like to have a desktop OS that isn't
>>> volatile.
>>> >
>>> > (Sorry for the possibly dumb question but I've never had such types of
>>> problems)
>>>
>>> just a wild guess: Do you happen to have activated the "Use" button at
>>> the RAM fs node? If yes, Sculpt will use the RAM file system for the
>>> depot and nothing will be permanent. Only one "Use" button can be active
>>> at a time. As long as you use the RAM fs for your depot, no other "Use"
>>> button will be presented. You have to click on the "Use" button again to
>>> un-use the file system.
>>>
>>> You have to click on the "Storage" node instead. Your hard disk should
>>> show up. Select the 3rd partition and click on the "Use" button there.
>>> But before doing that, I'd recommend clicking on the "Expand" button to
>>> let the partition expand to the full capacity of your hard disk.
>>>
>>> > [1] https://genode.org/documentation/articles/sculpt-20-02
>>>
>>> This document is outdated. Better take the current version as reference.
>>>
>>>   https://genode.org/documentation/articles/sculpt-20-08
>>>
>>> Cheers
>>> Norman
>>>
>>> --
>>> Dr.-Ing. Norman Feske
>>> Genode Labs
>>>
>>> https://www.genode-labs.com · https://genode.org
>>>
>>> Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
>>> Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
>>>
>>> _______________________________________________
>>> Genode users mailing list
>>> users at lists.genode.org
>>> https://lists.genode.org/listinfo/users
>>
>>
>>
>> --
>>
>> Edoardo Mantovani
>> *Independent security researcher*
>> *email: *Baseband at cpan.org
>> Urbino, Italy
>> _______________________________________________
>> Genode users mailing list
>> users at lists.genode.org
>> https://lists.genode.org/listinfo/users
>
>

-- 

Edoardo Mantovani
*Independent security researcher*
*email: *Baseband at cpan.org
Urbino, Italy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20210222/e32337e5/attachment.html>