Genode 19.08 demo on seL4/x86 build failing

[Alexander Boettcher]

Sure, a demo with graphical output makes absolutely no sense if the 
hardware has no such device.

Thanks.

On 2019-09-14 12:56, Christian Helmuth wrote:
> Hey Alex,
> 
> just a small note below.
> 
> On Sat, Sep 14, 2019 at 11:48:39 CEST, Alexander Boettcher wrote:
>> On 13.09.19 23:31, Adam T. Winchester wrote:
>>> [init -> drivers -> fb_drv] Error: H/W driver init failed
>>> [init -> drivers -> fb_drv] Error: __cxa_guard_abort called
>>> Kernel: Thread 'ep' died because of an uncaught exception
>>> [init -> drivers -> fb_drv] Error: Uncaught exception of type
>>> 'Framebuffer::Fatal'
>>> [init -> drivers -> fb_drv] Warning: abort called - thread: ep
>>> [init -> drivers] child "fb_drv" exited with exit value 1
>>> [init -> drivers -> usb_drv] Could not read screen resolution in config
>>> node
>>
>> You may try the fb_boot_drv [0][1] instead of the vesa driver.
> 
> The board used [1] seems to be quite similar to the APU.2C4 used by
> Sid Hussmann [3]. As I also own one of those I'm pretty sure they
> completely lack a VGA device because the addressed application
> scenario is mostly network equipment.
> 
> [1] https://www.apu-board.de/produkte/apu2d4.html
> [2] https://lists.genode.org/pipermail/users/2019-September/006891.html
> 
> Greets
> 

-- 
Alexander Boettcher
Genode Labs

https://www.genode-labs.com - https://www.genode.org

Genode Labs GmbH - Amtsgericht Dresden - HRB 28424 - Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth