bin/nic_drv no such directory in Genode 15.02

[Hinnerk van Bruinehsen]

I'm not sure if I understand you correctly. The network controller in the
i.MX6 SoC is the one driven by the fec driver inside linux. This driver was
ported to Genode last year and merged into the repo in November 2017.
I'm not sure how much work is required to get everything working on the
Sabrelite board, but the fec driver is the one you want.
Therefore I would again recommend to switch to a newer release of Genode that
includes the driver. My personal recommendation would be to always keep close
to the latest released version of Genode (which as of now is 18.08), unless the
latest version has a bug that you can't fix or work around or has a feature you
depend on removed that you neither can carry yourself or implement in another way.

Regards,
Hinnerk

On Wed, Sep 19, 2018 at 09:50:42AM +0530, Prakash A wrote:
>    Tq sir, but I am working on imx6 processor,  and which latest genode
>    wirsion that supports imx6. 
>    On Tue 18 Sep, 2018, 12:47 PM Hinnerk van Bruinehsen,
>    <[1]hvbruinehsen at stackptr.de> wrote:
> 
>      Hi,
> 
>      the NIC driver for the i.MX MCUs (which afaik power the sabrelite)
>      were added in November 2017. So unless you want to backport them to
>      15.02
>      you won't be able to use them.
>      Generally I'd advise you to switch to just switch to a newer release.
> 
>      Regards,
>      Hinnerk van Bruinehsen
> 
>      On Tue, Sep 18, 2018 at 12:10:42PM +0530, Prakash A wrote:
>      >    Hi,
>      >       I am using network_test_nic run script to test nic driver. 
>      >    my command is make run/network_test_nic
>      >    At the end I am getting message like :
>      >    genode build completed
>      >    cp: cannot stat 'bin/nic_drv': No such file or directory
>      >        while executing
>      >    and some error messages.
>      >    I am using Genode 15.02 and the platform is hw_sabrelite_tz. I have
>      >    enabled the dde_ipxe repository in build.config and also I run the
>      command
>      >    make prepare in dde_ipxe, dde_linux, libports and ports in their
>      >    respective directories. But still I am getting same error.
>      >    Is anything to need implement for nic driver?
>      >    or is there any problem in tool_chain, I am using tool_chain 14.11
>      for
>      >    Genode 15.02.
>      >    Regards,
>      >    Prakash A
>      >    M.Tech (CSE)
> 
>      > _______________________________________________
>      > Genode users mailing list
>      > [2]users at lists.genode.org
>      > [3]https://lists.genode.org/listinfo/users
> 
>      _______________________________________________
>      Genode users mailing list
>      [4]users at lists.genode.org
>      [5]https://lists.genode.org/listinfo/users
> 
> References
> 
>    Visible links
>    1. mailto:hvbruinehsen at stackptr.de
>    2. mailto:users at lists.genode.org
>    3. https://lists.genode.org/listinfo/users
>    4. mailto:users at lists.genode.org
>    5. https://lists.genode.org/listinfo/users

> _______________________________________________
> Genode users mailing list
> users at lists.genode.org
> https://lists.genode.org/listinfo/users