usb issues on AMD 9xx chipset

Mon Apr 2 01:24:23 CEST 2018

The AHCI driver will not work for AMD AHCI controllers - this driver just
doesn't work yet only on the AMD controllers (I spent over a month trying
to modify the driver myself to get this to work without any luck).

On Sun, Apr 1, 2018 at 6:32 PM, Nobody III <hungryninja101 at ...9...> wrote:

> Update:
> I have tried giving usb_drv access to all PCI devices. This hasn't changed
> anything.
> Also, the AHCI driver still doesn't work, and gives the "sys_assign_pci:
> Invalid Hint" errors, but not the Out_of_caps error that usb_drv does.
>
> On Sat, Mar 31, 2018 at 12:44 PM, Nobody III <hungryninja101 at ...9...>
> wrote:
>
>> No. I can use platform_drv just fine without usb_drv, and even with
>> fb_drv.
>>
>> On Sat, Mar 31, 2018, 10:32 AM Chris Rothrock <cgrothrock at ...9...>
>> wrote:
>>
>>> if you don't load the usb_drv, does the platform_drv still run out of
>>> caps?
>>>
>>> On Sat, Mar 31, 2018 at 2:46 AM, Nobody III <hungryninja101 at ...9...>
>>> wrote:
>>>
>>>> I've been testing Genode's current compatibility with my desktop
>>>> computer, which has an AMD 9xx chipset. While the framebuffer driver works
>>>> fine, usb_drv does not.
>>>>
>>>> Here's the full output:
>>>>
>>>> Genode 18.02-2-g6888094f6 <local changes>
>>>> 16299 MiB RAM and 63253 caps assigned to init
>>>> [init -> acpi_drv] Found MADT
>>>> [init -> acpi_drv] MADT IRQ 0 -> GSI 2 flags: 0
>>>> [init -> acpi_drv] MADT IRQ 9 -> GSI 9 flags: 15
>>>> [init -> acpi_drv] Found MCFG
>>>> [init -> acpi_drv] MCFG BASE 0xe0000000 seg 0x0 bus 0x0-0xff
>>>> [init -> platform_drv] 0:2.0 - bridge 1:0.0
>>>> [init -> platform_drv] 0:9.0 - bridge 2:0.0
>>>> [init -> platform_drv] 0:14.4 - bridge 3:0.0
>>>> [init -> platform_drv] 0:15.0 - bridge 4:0.0
>>>> [init -> platform_drv] 0:15.3 - bridge 5:0.0
>>>> [init -> usb_drv] Could not read screen resolution in config node
>>>> [init -> usb_drv] Configured HID screen with 0x0 (multitouch=false)
>>>> [init -> usb_drv] No <storage> config node found - not starting the USB
>>>> Storage (Block) service
>>>> [init -> usb_drv] No <nic> config node found - not starting the USB Nic
>>>> (Network) service
>>>> [init -> usb_drv] No <raw> config node found - not starting external
>>>> USB service
>>>> [init -> usb_drv] Enabled UHCI (USB 1.0/1.1) support
>>>> [init -> usb_drv] Enabled OHCI (USB 1.0/1.1) support
>>>> [init -> usb_drv] Enabled EHCI (USB 2.0) support
>>>> [init -> usb_drv] Enabled XHCI (USB 3.0) support
>>>> *[init -> platform_drv] Warning: Out_of_caps during Device_component
>>>> construction*
>>>> *[init -> platform_drv] Warning: Out_of_caps during Device_component
>>>> construction*
>>>> *[ 0] sys_assign_pci: Invalid Hint (0x200)*
>>>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>>>> 2:0.0 failed phys=0xe0200000 virt=0x80400000
>>>> [init -> usb_drv] ioremap: mapped phys 0xfe100000 (size 32768) to virt
>>>> 0x20000
>>>> [init -> usb_drv] dev_info: xHCI Host Controller
>>>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number
>>>> 1
>>>> [init -> usb_drv] dev_info: hcc params 0x040040a5 hci version 0x100
>>>> quirks 0x00000010
>>>> [init -> platform_drv] 2:0.0 adjust IRQ as reported by ACPI: 10 -> 48
>>>> [init -> platform_drv] 2:0.0 uses MSI 64bit, vector 0x9f, address
>>>> 0xfee10000, maskable
>>>> [init -> usb_drv] dev_info: USB hub found
>>>> [init -> usb_drv] dev_info: 4 ports detected
>>>> [init -> usb_drv] dev_info: xHCI Host Controller
>>>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number
>>>> 2
>>>> [init -> usb_drv] dev_info: We don't know the algorithms for LPM for
>>>> this host, disabling LPM.
>>>> [init -> usb_drv] dev_info: USB hub found
>>>> [init -> usb_drv] dev_info: 4 ports detected
>>>> [ 0] sys_assign_pci: Invalid Hint (0xb2)
>>>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>>>> 0:16.2 failed phys=0xe00b2000 virt=0x1000
>>>> [init -> usb_drv] ioremap: mapped phys 0xfe204000 (size 256) to virt
>>>> 0x17000
>>>> [init -> usb_drv] dev_info: EHCI Host Controller
>>>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number
>>>> 3
>>>> [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI
>>>> dummy qh workaround
>>>> [init -> platform_drv] 0:16.2 adjust IRQ as reported by ACPI: 11 -> 17
>>>> [init -> platform_drv] 0:16.2 uses IRQ, vector 0x11, non-maskable
>>>> [init -> usb_drv] dev_info: irq 130, io mem 0xfe204000
>>>> [init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00
>>>> [init -> usb_drv] dev_info: USB hub found
>>>> [init -> usb_drv] dev_info: 4 ports detected
>>>> [ 0] sys_assign_pci: Invalid Hint (0x9a)
>>>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>>>> 0:13.2 failed phys=0xe009a000 virt=0x1000
>>>> [init -> usb_drv] ioremap: mapped phys 0xfe207000 (size 256) to virt
>>>> 0x28000
>>>> [init -> usb_drv] dev_info: EHCI Host Controller
>>>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number
>>>> 4
>>>> [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI
>>>> dummy qh workaround
>>>> [init -> platform_drv] 0:13.2 adjust IRQ as reported by ACPI: 11 -> 17
>>>> [init -> platform_drv] 0:13.2 uses IRQ, vector 0x11, non-maskable
>>>> [init -> usb_drv] dev_info: irq 131, io mem 0xfe207000
>>>> [init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00
>>>> [init -> usb_drv] dev_info: USB hub found
>>>> [init -> usb_drv] dev_info: 5 ports detected
>>>> [ 0] sys_assign_pci: Invalid Hint (0x92)
>>>> [init -> platform_drv] Error: usb_drv -> : assignment of PCI device
>>>> 0:12.2 failed phys=0xe0092000 virt=0x1000
>>>> [init -> usb_drv] ioremap: mapped phys 0xfe209000 (size 256) to virt
>>>> 0x29000
>>>> [init -> usb_drv] dev_info: EHCI Host Controller
>>>> [init -> usb_drv] dev_info: new USB bus registered, assigned bus number
>>>> 5
>>>> [init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI
>>>> dummy qh workaround
>>>> [init -> platform_drv] 0:12.2 adjust IRQ as reported by ACPI: 11 -> 17
>>>> [init -> platform_drv] 0:12.2 uses IRQ, vector 0x11, non-maskable
>>>> [init -> usb_drv] dev_info: irq 132, io mem 0xfe209000
>>>>
>>>> Also, I get the following message in dmesg on linux (from
>>>> drivers/usb/host/pci-quirks.c), but not from usb_drv:
>>>> QUIRK: Enable AMD PLL fix
>>>>
>>>> What might be going on? Why would usb_drv cause platform_drv to run out
>>>> of CAPs, even when I assign it 2000 CAPs (instead of 800)?
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> genode-main mailing list
>>>> genode-main at lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/genode-main
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>>
>>> Thank You,
>>>
>>> Chris Rothrock
>>> Senior System Administrator
>>> (315) 308-1637
>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______
>>> _________________________________________
>>> genode-main mailing list
>>> genode-main at lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/genode-main
>>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> genode-main mailing list
> genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
>

-- 

Thank You,

Chris Rothrock
Senior System Administrator
(315) 308-1637
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20180401/f617b2b4/attachment.html>