Virtual machines from .vdi images
Chris Rothrock
cgrothrock at ...9...
Thu Dec 14 16:45:37 CET 2017
Here is the output from these two commands. Again, in the BIOS there are
no options at all to change the parameters of the SATA controller. This
one appears to be set to RAID mode and no options to modify it from this
more so this PC, unless I load a custom BIOS on it, will not be able to
work with the AHCI controller driver from Genode. (device 00:17.0). Jut to
verify I went through every single option throughout the BIOS once again to
try to turn off the RAID mode but I simply can't do it.
it at ...538...:~$ sudo lshw -sanitize -numeric
computer
description: Computer
width: 64 bits
capabilities: smbios-2.7 vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7766MiB
*-cpu
product: Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu at ...361...
size: 1400MHz
capacity: 3401MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8
apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss
ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon
pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni
pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr
pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave
avx f16c rdrand lahf_lm abm 3dnowprefetch epb intel_pt tpr_shadow vnmi
flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms
invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 dtherm
ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
*-pci
description: Host bridge
product: Intel Corporation [8086:591F]
vendor: Intel Corporation [8086]
physical id: 100
bus info: pci at ...332...:00:00.0
version: 05
width: 32 bits
clock: 33MHz
*-display UNCLAIMED
description: VGA compatible controller
product: Intel Corporation [8086:5912]
vendor: Intel Corporation [8086]
physical id: 2
bus info: pci at ...332...:00:02.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm vga_controller bus_master
cap_list
configuration: latency=0
resources: memory:d0000000-d0ffffff memory:c0000000-cfffffff
ioport:3000(size=64)
*-usb
description: USB controller
product: Sunrise Point-H USB 3.0 xHCI Controller [8086:A12F]
vendor: Intel Corporation [8086]
physical id: 14
bus info: pci at ...332...:00:14.0
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:122 memory:d1020000-d102ffff
*-usbhost:0
product: xHCI Host Controller [1D6B:3]
vendor: Linux 4.4.0-21-generic xhci-hcd [1D6B]
physical id: 0
bus info: usb at ...539...
logical name: usb2
version: 4.04
capabilities: usb-3.00
configuration: driver=hub slots=10 speed=5000Mbit/s
*-usbhost:1
product: xHCI Host Controller [1D6B:2]
vendor: Linux 4.4.0-21-generic xhci-hcd [1D6B]
physical id: 1
bus info: usb at ...23...
logical name: usb1
version: 4.04
capabilities: usb-2.00
configuration: driver=hub slots=16 speed=480Mbit/s
*-usb:0
description: Mouse
product: World of Warcraft MMO Gaming Mouse:Legendary
Edition [1038:1310]
vendor: SteelSeries [1038]
physical id: 1
bus info: usb at ...23...:1
version: 2.19
capabilities: usb-1.10
configuration: driver=usbhid maxpower=120mA
speed=12Mbit/s
*-usb:1
description: Keyboard
product: USB KEYBOARD [258A:1]
vendor: SINO WEALTH [258A]
physical id: 2
bus info: usb at ...23...:2
version: 1.00
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usb:2
description: Mass storage device
product: Cruzer Glide [781:5575]
vendor: SanDisk [781]
physical id: b
bus info: usb at ...23...:b
version: 1.00
serial: [REMOVED]
capabilities: usb-2.10 scsi
configuration: driver=usb-storage maxpower=224mA
speed=480Mbit/s
*-generic UNCLAIMED
description: Signal processing controller
product: Sunrise Point-H Thermal subsystem [8086:A131]
vendor: Intel Corporation [8086]
physical id: 14.2
bus info: pci at ...332...:00:14.2
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: latency=0
resources: memory:d104a000-d104afff
*-storage
description: RAID bus controller
product: SATA Controller [RAID mode] [8086:2822]
vendor: Intel Corporation [8086]
physical id: 17
bus info: pci at ...332...:00:17.0
version: 31
width: 32 bits
clock: 66MHz
capabilities: storage msi pm bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:123 memory:d1048000-d1049fff
memory:d104e000-d104e0ff ioport:3080(size=8) ioport:3088(size=4)
ioport:3060(size=32) memory:d104c000-d104c7ff
*-isa
description: ISA bridge
product: Sunrise Point-H LPC Controller [8086:A149]
vendor: Intel Corporation [8086]
physical id: 1f
bus info: pci at ...332...:00:1f.0
version: 31
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-memory UNCLAIMED
description: Memory controller
product: Sunrise Point-H PMC [8086:A121]
vendor: Intel Corporation [8086]
physical id: 1f.2
bus info: pci at ...332...:00:1f.2
version: 31
width: 32 bits
clock: 33MHz (30.3ns)
capabilities: bus_master
configuration: latency=0
resources: memory:d1044000-d1047fff
*-multimedia
description: Audio device
product: Sunrise Point-H HD Audio [8086:A170]
vendor: Intel Corporation [8086]
physical id: 1f.3
bus info: pci at ...332...:00:1f.3
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=snd_hda_intel latency=64
resources: irq:125 memory:d1040000-d1043fff
memory:d1030000-d103ffff
*-serial UNCLAIMED
description: SMBus
product: Sunrise Point-H SMBus [8086:A123]
vendor: Intel Corporation [8086]
physical id: 1f.4
bus info: pci at ...332...:00:1f.4
version: 31
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:d104d000-d104d0ff ioport:efa0(size=32)
*-network
description: Ethernet interface
product: Ethernet Connection (2) I219-LM [8086:15B7]
vendor: Intel Corporation [8086]
physical id: 1f.6
bus info: pci at ...332...:00:1f.6
logical name: eno1
version: 31
serial: [REMOVED]
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp
10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e
driverversion=3.2.6-k firmware=0.8-4 latency=0 link=no multicast=yes
port=twisted pair
resources: irq:124 memory:d1000000-d101ffff
*-scsi:0
physical id: 2
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: WDC WD5000AZLX-6
vendor: Western Digital
physical id: 0.0.0
bus info: scsi at ...361...:0.0.0
logical name: /dev/sda
version: 1A01
serial: [REMOVED]
size: 465GiB (500GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5
guid=eaaf6998-3866-45df-b02d-8820514d2968 logicalsectorsize=512
sectorsize=4096
*-volume:0
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 1
bus info: scsi at ...361...:0.0.0,1
logical name: /dev/sda1
version: FAT32
serial: [REMOVED]
size: 355MiB
capacity: 359MiB
capabilities: boot precious readonly hidden nomount fat
initialized
configuration: FATs=2 filesystem=fat label=SYSTEM name=EFI
system partition
*-volume:1
description: reserved partition
vendor: Windows
physical id: 2
bus info: scsi at ...361...:0.0.0,2
logical name: /dev/sda2
serial: [REMOVED]
capacity: 127MiB
capabilities: nofs precious readonly hidden nomount
configuration: name=Microsoft reserved partition
*-volume:2
description: Windows NTFS volume
vendor: Windows
physical id: 3
bus info: scsi at ...361...:0.0.0,3
logical name: /dev/sda3
version: 3.1
serial: [REMOVED]
size: 449GiB
capacity: 449GiB
capabilities: ntfs initialized
configuration: clustersize=4096 created=2017-06-13 21:55:09
filesystem=ntfs label=Windows name=Basic data partition state=clean
*-volume:3
description: Windows NTFS volume
vendor: Windows
physical id: 4
bus info: scsi at ...361...:0.0.0,4
logical name: /dev/sda4
version: 3.1
serial: [REMOVED]
size: 976MiB
capacity: 979MiB
capabilities: boot precious readonly hidden nomount ntfs
initialized
configuration: clustersize=4096 created=2017-06-14 07:52:43
filesystem=ntfs label=Windows RE tools modified_by_chkdsk=true
mounted_on_nt4=true name=Basic data partition resize_log_file=true
state=dirty upgrade_on_mount=true
*-volume:4
description: Windows NTFS volume
vendor: Windows
physical id: 5
bus info: scsi at ...361...:0.0.0,5
logical name: /dev/sda5
version: 3.1
serial: [REMOVED]
size: 14GiB
capacity: 14GiB
capabilities: precious readonly hidden nomount ntfs
initialized
configuration: clustersize=4096 created=2017-06-14 07:46:02
filesystem=ntfs label=Recovery Image modified_by_chkdsk=true
mounted_on_nt4=true name=Basic data partition resize_log_file=true
state=dirty upgrade_on_mount=true
*-scsi:1
physical id: 3
logical name: scsi3
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: DVDRW DU8AESH
vendor: hp PLDS
physical id: 0.0.0
bus info: scsi at ...540...:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
version: 6HS3
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-scsi:2
physical id: 4
bus info: usb at ...23...:11
logical name: scsi4
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
product: Cruzer Glide
vendor: SanDisk
physical id: 0.0.0
bus info: scsi at ...167...:0.0.0
logical name: /dev/sdb
version: 1.00
serial: [REMOVED]
size: 118GiB (126GB)
capabilities: removable
configuration: ansiversion=6 logicalsectorsize=512
sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdb
size: 118GiB (126GB)
capabilities: partitioned partitioned:dos
configuration: signature=38d246ae
*-volume
description: Windows FAT volume
vendor: SYSLINUX
physical id: 1
logical name: /dev/sdb1
logical name: /cdrom
version: FAT32
serial: [REMOVED]
size: 117GiB
capacity: 118GiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat label=MULTIBOOT
mount.fstype=vfat
mount.options=rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
state=mounted
it at ...538...:~$ sudo lspci -vvvnn
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:591f] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:802e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device
[8086:5912] (rev 04) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company Device [103c:802e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not
Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel modules: i915_bpo
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0
xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Sunrise Point-H USB 3.0 xHCI Controller
[103c:802e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 0: Memory at d1020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee00218 Data: 0000
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise
Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H Thermal subsystem
[103c:802e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d104a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
00:17.0 RAID bus controller [0104]: Intel Corporation SATA Controller [RAID
mode] [8086:2822] (rev 31)
Subsystem: Hewlett-Packard Company SATA Controller [RAID mode] [103c:802e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at d1048000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at d104e000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3088 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at d104c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00238 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller
[8086:a149] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H LPC Controller
[103c:802e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC
[8086:a121] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H PMC [103c:802e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d1044000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio
[8086:a170] (rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H HD Audio [103c:802e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 125
Region 0: Memory at d1040000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at d1030000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00278 Data: 0000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123]
(rev 31)
Subsystem: Hewlett-Packard Company Sunrise Point-H SMBus [103c:802e]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d104d000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection
(2) I219-LM [8086:15b7] (rev 31)
DeviceName: Onboard Lan
Subsystem: Hewlett-Packard Company Ethernet Connection (2) I219-LM
[103c:802e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00258 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
On Wed, Nov 15, 2017 at 7:21 AM, Chris Rothrock <cgrothrock at ...9...>
wrote:
> I wasn't trying to side-step the issue. The Intel-based system that I
> tried this on just doesn't have Linux installed (it's a Windows machine)
> and I only moved over the hard drive with the Genode build on it to attempt
> the boot. At some point I will need to run Linux on that machine but I had
> other more pressing goals from my boss (specifically to find out if USB can
> be used) to try to get through before getting Linux on and checking this.
>
> Something that may be of interest, however, is when I have been sifting
> through the Linux AHCI driver source code https://github.com/
> torvalds/linux/blob/master/drivers/ata/ahci.c I found a comment in the
> code regarding the AMD controllers at line 409:
> /* AMD is using RAID class only for ahci controllers */
> This may have something to do with the Genode AHCI driver not working on
> AMD controllers and might help lead in the right direction for a resolution.
>
> Chris
>
>
> On Wed, Nov 15, 2017 at 3:08 AM, Norman Feske <
> norman.feske at ...1...> wrote:
>
>> Hi Chris,
>>
>> On 09.11.2017 21:56, Chris Rothrock wrote:
>> > Unfortunately the BIOS configuration on this machine does not have any
>> > options to change (or even see) the actual mode the SATA controller is
>> > in so this path is a bust. To change track, but still try to load from
>> > a block device, how can I use a USB flash drive as a block device to
>> > store the .VDI image on and read from rather than the SATA
>> > controller/hard drive?
>>
>> you may take a look at 'repos/dde_linux/run/usb_storage.run'.
>>
>> That said, the intermediate outcome of the current discussion is rather
>> disappointing from my point of view as you ignored important parts of
>> Christian's Helmuth's posting (such as providing the output of lspci),
>> which would have helped us to better understand the situation and
>> possibly improve Genode. By merely attempting to side-step issues
>> ("change tracks"), there is hardly any chance to learn from the issue at
>> hand and, thereby, no benefit for the community at large.
>>
>> Regards
>> Norman
>>
>> --
>> Dr.-Ing. Norman Feske
>> Genode Labs
>>
>> http://www.genode-labs.com · http://genode.org
>>
>> Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
>> Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> genode-main mailing list
>> genode-main at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/genode-main
>>
>
>
>
> --
>
>
> Thank You,
>
> Chris Rothrock
> Senior System Administrator
> (315) 308-1637
>
>
>
--
Thank You,
Chris Rothrock
Senior System Administrator
(315) 308-1637
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20171214/e19d86a5/attachment.html>
More information about the users
mailing list