port samsung exynos 5

[Martin Stein]

Hi Waldo,

As you state that the bootloader does fine, I assume that you're getting
serial output until Genode comes into play and hence the wiring can't be
a problem. Normally, Uboot prints out detailed information on its
version. Something like "U-Boot 2014.07-gfdaebbd-dirty (Dec 17 2014 -
15:44:12)". Could you please post this line?

Have you tried to adapt the UART driver parameters?

On 22.01.2015 16:00, Waldo Paz Rodriguez wrote:
> Hi Martin, thanks for yours tips, I am using the Uboot for the yse5250. 
> It boot fine, but when I am loading the genode binary(elf), it stays 
> loading the system and doesnt show nothing on the serial console.
>
> best regards, waldo
> El 22/01/15 a las 07:07, Martin Stein escribió:
>> On 22.01.2015 13:03, Martin Stein wrote:
>>> My Exynos 5250 manual says that
>>> uart0_base is 0x12C00000 and uart1_base is 0x12C10000 while uart0/1_clk
>>> should be the same as uart3_clk but both depend on the configuration
>> I mean "... same as uart2_clk ..." (the clock Genode uses currently) not
>> uart3_clk.
>>
>> ------------------------------------------------------------------------------
>> New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
>> GigeNET is offering a free month of service with a new server in Ashburn.
>> Choose from 2 high performing configs, both with 100TB of bandwidth.
>> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
>> http://p.sf.net/sfu/gigenet
>> _______________________________________________
>> genode-main mailing list
>> genode-main at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/genode-main
>
> ------------------------------------------------------------------------------
> New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
> GigeNET is offering a free month of service with a new server in Ashburn.
> Choose from 2 high performing configs, both with 100TB of bandwidth.
> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
> http://p.sf.net/sfu/gigenet
> _______________________________________________
> genode-main mailing list
> genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main