ATAPI driver still not working

[Nobody III]

How can I get the output from Genode running on real hardware? Even using a
higher screen resolution would be extremely helpful.
On Nov 3, 2014 11:28 AM, "Sebastian Sumpf" <Sebastian.Sumpf at ...1...>
wrote:

> Hi Ben,
>
> On 11/03/2014 04:04 PM, Nobody III wrote:
> > The ATAPI driver is still unable to detect my hard drive (or my CD drive
> > for that matter), even though I have switched to a 32-bit Genode system.
> > Any help?
>
> Unfortunately, the ATAPI driver is a really old peace of code. We
> haven't used in a long time and there doesn't even exist a proper run
> script to test it. I've tried the ones I could find, some seem to work a
> little, while others do not work at all. Also there are issues with I/O
> APIC using kernels, where one might need the ACPI driver to locate the
> corresponding GSI's that replace the legacy IRQ numbers as well as find
> out polarity and trigger modes (especially for Fiasco/Fiasco.OC). We
> have regarded legacy IDE support as obsolete for a while. I can try, to
> at least, build a working run script for some kernel working in Qemu for
> a start, but I can't promise, since my time is limited. It seems like
> Nova is a good candidate for the time being. So my suggestion would be,
> build a run script and find out why the driver does not get an interrupt
> (which usually is the cause of all the trouble). The corresponding
> driver output should be:
>
> Enabling interrupts:
> [init -> atapi_dev Device initialized! Enabling interrupts ...
>
> When receiving the first interrupt:
> [init -> atapi_drv] First block: 0 last block <last block>, block size 512
>
> It might be the wrong IRQ number (double check with Linux) or the wrong
> trigger/polarity information. If you don't even get to the first output
> above, something is really messed up. In that case I would advice you
> that you send us the complete output of the test run, your exacts
> hardware specifications, and if possible a working run script.
>
> Regards,
>
> Sebastian
>
>
>
> --
> Sebastian Sumpf
> Genode Labs
>
> http://www.genode-labs.com · http://genode.org
>
> Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
> Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
>
>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> genode-main mailing list
> genode-main at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genode.org/pipermail/users/attachments/20141103/1dae11a5/attachment.html>