Initializing cgroup subsys cpu Linux version 2.6.35.3 (root@HPEliteBook840G2) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #2 PREEMPT Wed Mar 2 19:14:00 CET 2016 CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: Freescale MX53 LOCO Board Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 24576 free_area_init_node: node 0, pgdat c09122e0, node_mem_map c09b7000 Normal zone: 192 pages used for memmap Normal zone: 0 pages reserved Normal zone: 24384 pages, LIFO batch:3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 24384 Kernel command line: console=ttymxc0,115200 console=tty1 video=mxcdi0fb:RGB666,XGA di0_primary ldb=di0 earlyprintk loglevel=10 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) allocated 491520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 96MB = 96MB total Memory: 81316k/81316k available, 16988k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfde00000 - 0xffe00000 ( 32 MB) vmalloc : 0xc6800000 - 0xf4000000 ( 728 MB) lowmem : 0xc0000000 - 0xc6000000 ( 96 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc0039000 ( 196 kB) .text : 0xc0039000 - 0xc0882000 (8484 kB) .data : 0xc08aa000 - 0xc0912ce0 ( 420 kB) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:368 MXC GPIO hardware MXC IRQ initialized MXC_Early serial console at MMIO 0x53fbc000 (options '115200') bootconsole [ttymxc0] enabled Console: colour dummy device 80x30 console [tty1] enabled, bootconsole disabled Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok regulator: core version 0.5 NET: Registered protocol family 16 i.MX IRAM pool: 128 KB@0xc6840000 FAILED TO RELEASE IRAM PARTITION CPU is i.MX0 Revision 0.0 Using SDMA I.API MXC DMA API initialized IMX usb wakeup probe the wakeup pdata is 0xc08b74f0 IMX usb wakeup probe the wakeup pdata is 0xc08b75a4 bio: create slab at 0 SCSI subsystem initialized Freescale USB OTG Driver loaded, $Revision: 1.55 $ ****************************** NOTICE ***************************** You have seen this notice as you have enabled OTG driver for mx53 LOCO board For mx53 loco board, the OTG function is unavailable due to hardware limitation So, Only one usb function (device or host) can be available for certain image Please config your kernel to disable OTG and the usb function you don't want to use And remain the other usb function you would like to use Below OTG configs should be removed: CONFIG_MXC_OTG, CONFIG_USB_OTG Choose one of below configs for host or device function But DO NOT choose them together OTG host config CONFIG_USB_EHCI_ARC_OTG OTG device config CONFIG_USB_GADGET usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... da9052_ssc_i2c 0-0048: 2 - da9052_i2c_read:master_xfer Failed!! da9052_i2c_is_connected - i2c read failed..... IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) PMIC Light driver loading... Advanced Linux Sound Architecture Driver Version 1.0.23. Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Switching to clocksource mxc_timer1 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Freeing initrd memory: 5692K LPMode driver module loaded Static Power Management for Freescale i.MX5 PM driver module loaded sdram autogating driver module loaded Bus freq driver module loaded DI0 is primary mxc_dvfs_core_probe mxc_dvfs_core_probe: failed to get gp regulator DVFS driver module loaded i.MXC CPU frequency driver mxc_cpufreq_driver_init: failed to get gp regulator DVFS PER driver module loaded ashmem: initialized msgmni has been set to 169 alg: No test for stdrng (krng) cryptodev: driver loaded. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) regulator: get() with no identifier By setting, SII driver will not be enabled regulator: get() with no identifier mxc_ldb mxc_ldb: default di0 single mode mxc_ipu mxc_ipu: Channel already disabled 9 mxc_ipu mxc_ipu: Channel already uninitialized 9 IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) mxc_ipu mxc_ipu: Channel already disabled 7 mxc_ipu mxc_ipu: Channel already uninitialized 7 mxc_ipu mxc_ipu: Channel already disabled 10 mxc_ipu mxc_ipu: Channel already uninitialized 10 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a Freescale i.MX console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a Freescale i.MX mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale i.MX mxcintuart.3: ttymxc3 at MMIO 0x53ff0000 (irq = 13) is a Freescale i.MX mxcintuart.4: ttymxc4 at MMIO 0x63f90000 (irq = 86) is a Freescale i.MX loop: module loaded pmem_adsp: 0 init pmem_gpu: 1 init MXC MTD nand Driver 3.0 i.MX GPMI NFC vcan: Virtual CAN interface driver Freescale FlexCAN Driver FEC Ethernet Driver fec_enet_mii_bus: probed PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 18, io base 0x53f80000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200 fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for GSM modem (1-port) usb 2-1: new low speed USB device using fsl-ehci and address 2 usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems ARC USBOTG Device Controller driver (1 August 2005) Android usb driver initialize android_usb gadget: android_usb ready Suspend udc for OTG auto detect fsl-usb2-udc: bind to driver android_usb android gadget: register function adb android gadget: register function usb_mass_storage android gadget: register function rndis rndis_function_bind_config MAC: 00:00:00:00:00:00 android_usb gadget: using random self ethernet address android_usb gadget: using random host ethernet address usb0: MAC d2:e6:0f:5f:48:8b usb0: HOST MAC 8a:92:e5:ff:36:ed android_usb gadget: usb_mass_storage, version: 2009/09/11 android_usb gadget: Number of LUNs=3 lun0: LUN: removable file: (no medium) lun1: LUN: removable file: (no medium) lun2: LUN: removable file: (no medium) f_accessory init android gadget: register function accessory mice: could not register psaux device, error: -16 mice: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys/input/input0 MXC keypad loaded egalax_ts 2-0004: request gpio failed:-16 input: eGalax Touch Screen as /devices/platform/imx-i2c.2/i2c-2/2-0004/input/input1 p1003_fwv33 2-0041: couldn't read panel infomation. p1003_fwv33: probe of 2-0041 failed with error -5 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized Linux video capture interface: v2.00 mxc_v4l2_output mxc_v4l2_output.0: Registered device video1 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) APM Battery Driver MXC WatchDog Driver 2.0 MXC Watchdog # 0 Timer: initial timeout 60 sec device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Bluetooth: Virtual HCI driver ver 1.3 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCIATH3K protocol initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb VPU initialized mxc_asrc registered gpu mmu disabled usb 1-1: new low speed USB device using fsl-ehci and address 2 udc suspend begins gadget not in device mode, leaving early mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 203 irq 3 INTERNAL DMA input: USB OPTICAL MOUSE as /devices/platform/fsl-ehci.1/usb2/2-1/2-1:1.0/input/input2 generic-usb 0003:093A:2521.0001: input: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-fsl-ehci.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver logger: created 64K log 'log_main' logger: created 256K log 'log_events' logger: created 64K log 'log_radio' logger: created 64K log 'log_system' Cirrus Logic CS42888 ALSA SoC Codec Driver sgtl5000-i2c 1-000a: SGTL5000 revision 17 mxc_spdif mxc_spdif.0: MXC SPDIF Audio Transmitter No device for codec mxc spdif No device for DAI mxc spdif No device for DAI imx-ssi-1-0 No device for DAI imx-ssi-1-1 No device for DAI imx-ssi-2-0 No device for DAI imx-ssi-2-1 usb 1-1: device v0518 p0001 is not supported No device for DAI imx-spdif-dai DMA Sound Buffer Allocated: Playback UseIram=1 ext_ram=0 buf->addr=f8016000 buf->area=c6856000 size=24576 DMA Sound Buffer Allocated: Capture UseIram=1 ext_ram=1 buf->addr=85f78000 buf->area=ff07b000 size=24576 asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input3 generic-usb 0003:0518:0001.0002: input: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-fsl-ehci.0-1/input0 mmc0: new high speed SDHC card at address e624 input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.1/input/input4 mmcblk0: mmc0:e624 SU04G 3.69 GiB mmcblk0: p1 p2 generic-usb 0003:0518:0001.0003: input: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-fsl-ehci.0-1/input1 DMA Sound Buffer Allocated: Playback UseIram=1 ext_ram=1 buf->addr=814b8000 buf->area=ff082000 size=24576 asoc: mxc spdif <-> imx-spdif-dai mapping ok ALSA device list: #0: imx-3stack (SGTL5000) #1: imx-3stack-spdif (mxc spdif) nf_conntrack version 0.5.0 (1359 buckets, 5436 max) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing init memory: 196K eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1) PHY: 0:00 - Link is Up - 100/Full eth0: no IPv6 routers present