Yes, I had a similar idea of why the hdd cannot be accessed from Sculpt, but all other hardwares fit perfectly with the OS.
I am using an elitebook 2540p.
Il giorno lunedì 22 febbraio 2021, Edoardo Mantovani <
mantovani.edoardo18@gmail.com> ha scritto:
Hello,Yes, I had a similar idea of why the hdd cannot ne accessed from Sculpt, bit alla other hardwares fit perfectly with the OS.
I al using an elitebook 2540p.
Il giorno lunedì 22 febbraio 2021, Nobody III <
hungryninja101@gmail.com> ha scritto:
That sounds like a lack of support for your SATA controller. I've seen that on my own computers.
Hi Norman,
Thanks for the reply, but I have tried Also this before, result: storage doesn't show anything.
(See the photo, I've modified it because was excessively heavy)
Regards,
Edoardo Mantovani
Hi Edoardo,
> "Making customizations permanent" here[1], but also without clicking
> into the ram fs filesystem bottoms the /config/ folder resets itself
> after the reboot.
>
> Any Hints? Obviously, I would like to have a desktop OS that isn't volatile.
>
> (Sorry for the possibly dumb question but I've never had such types of problems)
just a wild guess: Do you happen to have activated the "Use" button at
the RAM fs node? If yes, Sculpt will use the RAM file system for the
depot and nothing will be permanent. Only one "Use" button can be active
at a time. As long as you use the RAM fs for your depot, no other "Use"
button will be presented. You have to click on the "Use" button again to
un-use the file system.
You have to click on the "Storage" node instead. Your hard disk should
show up. Select the 3rd partition and click on the "Use" button there.
But before doing that, I'd recommend clicking on the "Expand" button to
let the partition expand to the full capacity of your hard disk.
> [1] https://genode.org/documentation/articles/sculpt-20-02
This document is outdated. Better take the current version as reference.
https://genode.org/documentation/articles/sculpt-20-08
Cheers
Norman
--
Dr.-Ing. Norman Feske
Genode Labs
https://www.genode-labs.com · https://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
_______________________________________________
Genode users mailing list
users@lists.genode.org
https://lists.genode.org/listinfo/users
--
 |
Edoardo Mantovani
Independent security researcher | | email: Baseband@cpan.org | | Urbino, Italy | |
|
Genode users mailing list
users@lists.genode.org
https://lists.genode.org/listinfo/users
--
|
Edoardo Mantovani
Independent security researcher | | email: Baseband@cpan.org | | Urbino, Italy | |
|