Martin,
It appears that an Rpc entrypoint thread is successfully created (with id 0x0f) in the Platform_thread constructor, but when the thread is started a call to acess thread registers fails because an object with that id cannot be found in the thread object pool.

Bob

On 08/18/2014 11:33 AM, Bob Stewart wrote:
Martin,
    With the pull from early last week (before Norman's announcement of some of the commits for 14.08), the issue with the ROM fs initialization has gone. The memory allocation looks correct, as far as I can tell:

Core virtual memory allocator
---------------------
Allocator 810d1850 dump:
 Block: [00001000,00002000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00002000,00003000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00003000,00004000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00004000,00005000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00005000,00006000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00006000,00007000) size=00001000 avail=00000000 max_avail=80ff3000
 Block: [00007000,00008000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00008000,00009000) size=00001000 avail=00000000 max_avail=00000000
 Block: [00009000,0000a000) size=00001000 avail=00000000 max_avail=80ff3000
 Block: [0000a000,0000b000) size=00001000 avail=00000000 max_avail=00000000
 Block: [0000b000,0000c000) size=00001000 avail=00000000 max_avail=80ff3000
 Block: [0000c000,0000d000) size=00001000 avail=00000000 max_avail=00000000
 Block: [0000d000,81000000) size=80ff3000 avail=80ff3000 max_avail=80ff3000
 Block: [8139d000,ffff0000) size=7ec53000 avail=7ec53000 max_avail=7ec53000
 => mem_size=4291108864 (4092 MB) / mem_avail=4291059712 (4092 MB)

RAM memory allocator
---------------------
Allocator 810d07f4 dump:
 Block: [80000000,80001000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80001000,80002000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80002000,80003000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80003000,80004000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80004000,80005000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80005000,80006000) size=00001000 avail=00000000 max_avail=1ec63000
 Block: [80006000,80007000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80007000,80008000) size=00001000 avail=00000000 max_avail=00000000
 Block: [80008000,80009000) size=00001000 avail=00000000 max_avail=1ec63000
 Block: [80009000,8000a000) size=00001000 avail=00000000 max_avail=00000000
 Block: [8000a000,8000b000) size=00001000 avail=00000000 max_avail=1ec63000
 Block: [8000b000,8000c000) size=00001000 avail=00000000 max_avail=00000000
 Block: [8000c000,81000000) size=00ff4000 avail=00ff4000 max_avail=1ec63000
 Block: [8139d000,a0000000) size=1ec63000 avail=1ec63000 max_avail=1ec63000
 => mem_size=533082112 (508 MB) / mem_avail=533032960 (508 MB)

IO memory allocator
-------------------
Allocator 810d28b8 dump:
 Block: [44c00000,44e05000) size=00205000 avail=00205000 max_avail=00205000
 Block: [44e06000,44e09000) size=00003000 avail=00003000 max_avail=00205000
 Block: [44e0a000,45000000) size=001f6000 avail=001f6000 max_avail=001f6000
 Block: [47400000,47820000) size=00420000 avail=00420000 max_avail=00dff000
 Block: [48000000,48200000) size=00200000 avail=00200000 max_avail=00dff000
 Block: [48201000,49000000) size=00dff000 avail=00dff000 max_avail=00dff000
 => mem_size=25284608 (24 MB) / mem_avail=25284608 (24 MB)

IRQ allocator
-------------------
Allocator 810d3914 dump:
 Block: [00000000,0000007f) size=0000007f avail=0000007f max_avail=0000007f
 => mem_size=127 (0 MB) / mem_avail=127 (0 MB)

ROM filesystem
--------------
Rom_fs 810d4954 dump:
 Rom: [810fb000,8113a9e8) init
 Rom: [81175000,811b1ad0) bbb_platform_client
 Rom: [81275000,812a9980) bbb_heart_beat_led
 Rom: [81361000,8139bb30) Autopilot
 Rom: [81233000,812740c8) ctl_module_drv
 Rom: [8139c000,8139ca80) config
 Rom: [811b2000,811f445c) gpio_drv
 Rom: [812aa000,812e8174) pwm_drv
 Rom: [8113b000,81174b6c) platform_drv
 Rom: [811f5000,81232720) timer
 Rom: [8132a000,81360944) sd_card_bench
 Rom: [812e9000,81329164) uart_drv

I'm now into some threading issues which I'll pursue today (I get the messages unknown thread, failed to initialize thread registers, and failed to start thread after the ROM initialization).

Looking at all of the changes in the current master git repository, in the area of code I've just gone through, I think I should just do another pull from master, unless the there are more commits coming in this area before the official release of 14.08. I'll find out what's going with this thread issue anyway.

Bob


On 08/17/2014 06:56 PM, Bob Stewart wrote:
Oops, looked like I stomped on the closing brace in the Namespace Arm declaration in .../core/processor_driver/arm.h during a merge. Not sure why the compiler didn't catch that, but the core library now builds. I've one issue with an application module which I'll fix tomorrow then get to test the kernel start up again.

Thanks,
        Bob


On 08/17/2014 04:51 PM, Bob Stewart wrote:
Yes, Martin, I did a make clean after the pull. Still looking as to why the Arm namespace shows up above Genode. Let you when I find it.

Bob

On 08/17/2014 03:27 PM, Martin Stein wrote:
Btw. hope you have done 'make clean' after your Makefile changes. Otherwise this could cause the build system to act strange.

On 17.08.2014 21:16, Martin Stein wrote:
Hi Bob,
Looks like there's a problem with the name spaces. Instead of being comprised by 'Arm', 'Genode' should be a top-level name space as well as 'Kernel'. I think it would be a good idea to investigate why the 'Arm' prefix is active at all at 'double_list.h:95'.

Martin

On 17.08.2014 18:57, Bob Stewart wrote:
Hi Martin,
    Been out-of-town for the past few days.

I understand the changes due to issue 1199 and I did create the core library make file (in base-hw/lib/mk/platform_bbb) for the platform I'm working with before I left. Everything built ok until it got to cpu_session_component.c in the core library build section where multiple errors occurred. The following error would indicate I'm missing something fundamental:

In file included from /Work/Genode/genode-14.05/repos/base-hw/src/core/kernel/scheduler.h:19:0,
                 from /Work/Genode/genode-14.05/repos/base-hw/src/core/kernel/processor.h:21,
                 from /Work/Genode/genode-14.05/repos/base-hw/src/core/kernel/thread.h:21,
                 from /Work/Genode/genode-14.05/repos/base-hw/src/core/include/platform_thread.h:29,
                 from /Work/Genode/genode-14.05/repos/base/src/core/include/cpu_session_component.h:27,
                 from /Work/Genode/genode-14.05/repos/base/src/core/cpu_session_component.cc:21:
/Work/Genode/genode-14.05/repos/base-hw/src/core/kernel/double_list.h: In member function ���void Arm::Kernel::Double_list<T>::insert_tail(Arm::Kernel::Double_list<T>::Item*)���:
/Work/Genode/genode-14.05/repos/base-hw/src/core/kernel/double_list.h:95:4: error: ���printf��� is not a member of ���Arm::Genode���


Regarding the page fault in the ROM fs  initialization, I did not isolate the route cause -- it appeared to be getting a low address of 0x1000 and try to create a translation table entry with that. I thought I saw some changes in the ROM area in the pull, so I was going to get a clean build and then try again.

    Bob


On 08/13/2014 05:12 AM, Martin Stein wrote:
Hey Bob,

The changes you're talking about originate from this issue: https://github.com/genodelabs/genode/issues/1199. Core now consists of a generic 'base-hw/src/core/target.mk' that solely defines the target name and a dependency to the library 'core'. All the other content that core is composed of resides in the variant 'core.mk' and 'core.inc' library-description files within 'base-hw/lib/mk' and its sub-directories (respectively 'core-*.mk' and 'core-*.inc' for libraries that are additions to the core library).
At the one hand these changes reduce redundancy and LOC count as hardware-specifics were split up more fine-grained when transfered into libraries, at the other hand we unified the scheme of handling orthogonal specifiers (see for example the core-trustzone* files that provide optional trustzone support for different platform specifiers). Apart from that, the commits didn't change that much regarding the substance of core.
I hope this short insight helps you applying your changes to the current state. If you have further questions on this don't hesitate to ask.

Regarding the page fault: Does that mean that you were able to fix the fault?

Cheers
Martin

On 12.08.2014 23:41, Bob Stewart wrote:
Martin,
    Have not been able to build with the pull from the master branch. Looks like there are changes to base-hw build that I've not seen before.   The platform target.mk file now appear in a repos//base-hw/lib/mk/ directory as core.mk. Is there documentation on the changes? I searched the git repository but couldn't find any.


The mmu faulting address was coming from the creation of Rom_modules in the ROM fs.

Thanks,
        Bob

On 08/11/2014 09:03 AM, Bob Stewart wrote:

Thanks for the quick reply, Martin.

I'll pull the current master branch tomorrow and let you know if it fixes my issue.

Thanks for the debugging tip on core faults.
My core-only mmio regions are the same as they were in 14.02 and unless the handling of the region has changed I should have the correct translation table entries. My PDBG output from the _mmu_exception method was:

void Kernel::Thread::_mmu_exception(): f_addr 0x1008 f_writes 0x1 f_pd 0x813d6004 f_signal 0x0 label core

Looks like I've a problem with the fault address, so I'll keep digging to see where that is coming from.

Thanks,
        Bob
On 08/11/2014 07:54 AM, Martin Stein wrote:
Hi Bob,

On 09.08.2014 22:21, Bob Stewart wrote:

I went back to the 14.05 issues today and found I could get the kernel 
initialization to complete successfully if I reverted the S bit to 
"unshared" in the memory attributes in a Section entry create. Prior to 
14.05 this bit was set to "unshared" and was presumably changed in 14.05 
to allow for multiple processors accessing the same memory regions.

We had an issue (https://github.com/genodelabs/genode/issues/1181)
recently that the shared-bit should be set only when using SMP. The
related changes are in the current state of our master branch
(https://github.com/genodelabs/genode/tree/master) but not in version
14.05. Could you please give it a try?


In addition, after completing kernel initialization, core's "main" 
function is entered, the info message for creating local services shows 
up, a translation for the top of RAM (0x80000000) is created, then the 
message "failed to communicate thread event" occurs and init is never 
called. Any thoughts on why that message is appearing would be 
appreciated. It appears to be coming from initialization of the root 
interfaces.

This seems to be a page fault in core. Normally core should never
trigger a page fault because there's no one to handle it. So the kernel
doesn't know who to inform about it and thus prints this message. To
prevent this situation, memory regions statically needed by core
(program image, MMIO regions) get mapped 1:1 in the 'Core_pd'
constructor in 'base-hw/src/core/kernel/kernel.cc' using, among others,
the platform specific method 'Platform::_core_only_mmio_regions'. I
assume that your port misses a region in this function. You can get
further information about the page fault by printing things like
'_fault_addr', '_fault_writes', 'char const * Thread::label()', and
'unsigned long Thread::ip' in the method 'Thread::_mmu_exception()' in
'base-hw/src/core/arm/cpu_support.cc' right before '_fault.submit()'.

Cheers
Martin

------------------------------------------------------------------------------
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main






------------------------------------------------------------------------------



_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main




------------------------------------------------------------------------------



_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main




------------------------------------------------------------------------------



_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main




------------------------------------------------------------------------------



_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main




------------------------------------------------------------------------------



_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main