Hello Christian,

I was probably expressed wrong. Want I meant is, the board it does not boot. I know the board is functional because

I firstly tried to boot the Android image from the eMMC and it worked. So I am definitely doing something very

wrong or missing some step in between while preparing the SD card with the SculptOS image.

No hint or help is trivial as I am quite a beginner.

Thanks in advance!

Best regards,

Christo

Am Fr., Dez. 4, 2020 02:59 PM schrieb Christian Helmuth <christian.helmuth@genode-labs.com>:

Hello Christo,

maybe my hint sounds trivial but keep in mind that Genode log messages
are not printed to the HDMI screen but only available on the
UART/serial line.

Greets
--
Christian Helmuth
Genode Labs

https://www.genode-labs.com/ · https://genode.org/
https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/

Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

_______________________________________________
Genode users mailing list
users@lists.genode.org
https://lists.genode.org/listinfo/users